|Jan 30, 2013, 09:58 AM||#1|
Vintage G3 Desktop won't boot
I have an old G3 Desktop (266 MHz, 768 MB RAM, 1-PCI USB card) with OS 9 and Panther installed. I started this up just the other day, mostly just to see if it still worked. It booted fine into both OS 9 and OS X, the CD drive worked, USB card worked, all seemed good.
So, I decided that I would clean it up. Removed the cover, disconnected CD drive, HDD's, floppy drive. Wiped it down with dry towel, cleaned out the dust.
Reinstalled everything, attempted to restart....NOTHING!
Opened cover and realized i had forgotten to reattach HD cables (there are two HD's)
Attempted restart...nothing (black screen).
The power on LED lights up, fan starts, HD spins, I get the Mac chime
Monitor LED goes green for a couple of seconds, then back to yellow.
None of the start up keys on keyboard work!!!
Tried "c" with OS 9 disc...nothing
Tried removing battery for 5 mins....nothing
Tried pressing reset button (on MoBo) with power cord disconnected for 10 seconds...nothing
All of the cables (HDD/Floppy/CD) are installed as they were.
None of the master/slave/CS jumpers were changed.
Seems as though I may not have any video out...not sure
Confused as to why keyboard inputs don't work. Same keyboard/mouse as when it was working earlier.
Maybe it has finally met its end.
Any ideas would be helpful...it is really not necessary by any means to get this thing going...at this point I am just trying to figure out what might have happened!
|Jan 31, 2013, 04:33 PM||#5|
I'm upvoting the "reseat the RAM" comment and throw out that the symptoms your are stating sound a lot like what you get if the RAM or CPU card are not fully seated in place.
I know you didn't say you touched those, but I'm wondering if wiping things down, you somehow disconnected something.
I would maybe go back in there with a can of compressed air, and carefully check all those connections again.
Oh, and don't panic...
|Thread Tools||Search this Thread|
All times are GMT -5. The time now is 06:01 AM.