Go Back   MacRumors Forums > iPhone, iPod and iPad > iPad > iPad Accessories

Reply
 
Thread Tools Search this Thread Display Modes
Old Mar 17, 2012, 12:18 AM   #1
tinycg
macrumors member
 
Join Date: May 2009
Joby Ori for the New iPad??

Anyone heard anything of Joby releasing an Ori for the new iPad, because its slightly deeper than the 2, I'm assuming the existing case for the iPad 2 wont work. Has anyone tested this yet?

I LOVE my Ori on my original iPad, and it only has 2 caveats, one I think was addressed with the iPad 2 version.

1) the hinge that controls the stand is almost too good, in that when lying flat, with the cover open, it doesnt snap down into the case and has a bit of a bounce to it unless you snap it to one of its modes.

I ended up fixing this with a strategically placed piece of velcro and it does the job very well, but would love if the case dealt with this better as sometimes I dont want to snap it together just to open and use it without it 'bouncing' when I tap.

2) Smart cover support? I just noticed its subtly listed on their site, considering I dont have an iPad 2 version, there's no way for me to know for sure, does anyone else know?

Instead of spending $70 on a nice leather case, or $50 on an overpriced piece of cardboard, if this came in at the same price point as the previous version, I think its a no-brainer for best case on the planet.
__________________
'09 Mac Pro Octo 2.26 (10.8.2), 32GB RAM, 2 1TB HDDs, 2 10k RPM 320GBs in Raid-0, 27" ACD, 2 24" LCDs, GTX570 and GT120, '10 MBP 13" 8GB RAM, UI/UX Designer
tinycg is offline   0 Reply With Quote
Old Mar 17, 2012, 10:13 PM   #2
bigjohn
macrumors 6502
 
Join Date: Oct 2000
Location: Arcadia, CA
i love mine as well for the iPad 1. just got the iPad 3 and am wondering the same thing... any help out there?
__________________
Big John
iPhone 6+, iPad 3, iPod Nano, Mac Pro (2x2.26 Nehalem), MacBook Pro 2.6 (Late 2013-DG), Mini, iBook G3, PM 7100/66, Apple IIe
bigjohn is offline   0 Reply With Quote
Old Mar 17, 2012, 11:33 PM   #3
tinycg
Thread Starter
macrumors member
 
Join Date: May 2009
bigjohn, I emailed them last night when I wrote this, if they respond back I'll update this.

I'm worried that because it took them like 4 months to get the ipad 2 version out after its release that it might be a while.. I hope though that was due to the fact that it was still new for the original, that they had to do a smart cover redesign for it etc... where as hopefully the 3 can be retrofit.

I love it so much I dont want to go to something else unless I have no other option.
__________________
'09 Mac Pro Octo 2.26 (10.8.2), 32GB RAM, 2 1TB HDDs, 2 10k RPM 320GBs in Raid-0, 27" ACD, 2 24" LCDs, GTX570 and GT120, '10 MBP 13" 8GB RAM, UI/UX Designer
tinycg is offline   0 Reply With Quote
Old Mar 18, 2012, 12:37 AM   #4
moogs
macrumors member
 
Join Date: Sep 2006
Interested in this. Looks bulky and looks like it has trouble staying closed.
moogs is offline   0 Reply With Quote
Old Mar 18, 2012, 11:20 AM   #5
tinycg
Thread Starter
macrumors member
 
Join Date: May 2009
It's a little bulky, I'll give you that, but what it has in bulk it makes up for in protection, its an aluminum composite, so its strong and very very light. At least for the iPad 1 version, with no smart cover I never really had a problem keeping it closed.

The iPad 2 version supposedly has smart cover incorporated so I would think the magnetic closure would prevent it from opening in any situation that it might have with the first version.

It has a microfiber covering under the cover flap, the one thing I will say which is a slight design flaw which I'm not sure you can get around, is that the bottom of the cover when flipped around becames the base, so if you pick up any crap on a table and dont notice, you'll be putting that on your screen... I guess the same could be said about any case you flip open though, like even a regular smart cover.
__________________
'09 Mac Pro Octo 2.26 (10.8.2), 32GB RAM, 2 1TB HDDs, 2 10k RPM 320GBs in Raid-0, 27" ACD, 2 24" LCDs, GTX570 and GT120, '10 MBP 13" 8GB RAM, UI/UX Designer
tinycg is offline   0 Reply With Quote
Old Mar 19, 2012, 02:04 PM   #6
bigjohn
macrumors 6502
 
Join Date: Oct 2000
Location: Arcadia, CA
I emailed Joby asking if the iPad 2 version would work and if not, if there was an ETA on the one for the iPad 3 (weeks/months), here's their response:

Thank you for contacting JOBY.

It's going to be a couple more days before we will know if the new iPad 3 will fit our iPad 2 products.

I'm sure you understand that we're as interested as you in determining this.

We'll let you know just as soon as we can.

Maury Cohen | Product Specialist | DAYMEN


So it sounds like they are working on it, which is good.
__________________
Big John
iPhone 6+, iPad 3, iPod Nano, Mac Pro (2x2.26 Nehalem), MacBook Pro 2.6 (Late 2013-DG), Mini, iBook G3, PM 7100/66, Apple IIe
bigjohn is offline   0 Reply With Quote
Old Mar 19, 2012, 05:23 PM   #7
tinycg
Thread Starter
macrumors member
 
Join Date: May 2009
Same response

I got the same response John, I was just about to post it, it seems like we're not the only ones expressing interest which is a great sign.

My guess is they're waiting to get a few more new iPads to test to see if they can sell the current version as compatible or if they have to make some design changes.

Either way, it seems like a good sign.
__________________
'09 Mac Pro Octo 2.26 (10.8.2), 32GB RAM, 2 1TB HDDs, 2 10k RPM 320GBs in Raid-0, 27" ACD, 2 24" LCDs, GTX570 and GT120, '10 MBP 13" 8GB RAM, UI/UX Designer
tinycg is offline   0 Reply With Quote
Old Mar 25, 2012, 06:03 AM   #8
hybra
macrumors newbie
 
Join Date: Jul 2009
I found this on their website FAQ for the iPad 2 Ori:

Will the Ori for the iPad 2 fit the iPad 3?
The GorillaMobile Yogi and GorillaMobile Ori for iPad 2 are not compatible with iPad 3, as they are a very tight fit. JOBY is exploring options for the future, and we will be announcing any updates by the end of March.


In the meanwhile I have both iPad "3" and the Ori 2, and tried coupling them: the iPad seems to be kept strongly enough inside the shell in all the positions, but being the new iPad slightly thicker there are one corner and half a side a little sticking out. Another problem is that the cover doesn't seem to switch the screen off when it is closed. To sum up I think the Ori 2 is still usable with iPad 3 if you own already one and don't need a perfect fit, automatic screen standby on cover close or don't want to pay for a Ori upgrade.
However let's see what Joby comes out with the new one....it looks like it's a few days to disclosure.
hybra is offline   0 Reply With Quote
Old Mar 29, 2012, 07:12 PM   #9
tinycg
Thread Starter
macrumors member
 
Join Date: May 2009
Unhappy

Joby's twitter account has informed me that they are NOT going to make a version for the new iPad, and that the iPad 2 version is not a great solution either. Basically, the Ori going forward is dead:

Quote:
Hi Matt, unfortunately we will not be creating a iPad 3 exclusive version of the Ori. The iPad 2 version is a very tight fit.
Quote:
So the iPad fits, but it is tough to get in and out. The smart cover doesn't work. It is not a great solution.
Quote:
Yeah, unfortunately it is a great design, but we've decided that chasing after Apple is not a great business model for us.
Very disappointed, but I guess again, the few of us that saw the magic in it, just weren't enough.
__________________
'09 Mac Pro Octo 2.26 (10.8.2), 32GB RAM, 2 1TB HDDs, 2 10k RPM 320GBs in Raid-0, 27" ACD, 2 24" LCDs, GTX570 and GT120, '10 MBP 13" 8GB RAM, UI/UX Designer
tinycg is offline   0 Reply With Quote
Old Apr 19, 2012, 06:19 PM   #10
Vm3100
macrumors newbie
 
Join Date: Mar 2009
I've been holding off getting the new iPad until the new ori was available,I have it on the original iPad and love it,very sad to find it won't be available.
Vm3100 is offline   0 Reply With Quote
Old Apr 21, 2012, 08:23 AM   #11
bandiit999
macrumors newbie
 
Join Date: Oct 2011
Location: USA
ori case

I'm sure they will come out with something new and better based on the Ori.. looking forward to it as well
__________________
"Curiosity did not kill the cat"
bandiit999 is offline   0 Reply With Quote
Old Apr 21, 2012, 06:00 PM   #12
geoelectric
macrumors regular
 
Join Date: May 2008
Quote:
Originally Posted by bandiit999 View Post
I'm sure they will come out with something new and better based on the Ori.. looking forward to it as well
Yeah, I don't know. "We've decided that chasing after Apple is not a great business model for us" sounds pretty definitively like a dead end to me.
__________________
27" iMac, 2.8 GHz i7, 4GB RAM, 1TB HD; 13" MacBook Air, 1.8 GHz i7, 4GB RAM, 256 GB SSD; 64GB iPad 3rd Gen AT&T; 64GB iPhone 5 AT&T, 128GB iPhone 6+ AT&T otw.
geoelectric is offline   0 Reply With Quote
Old Apr 24, 2012, 03:09 AM   #13
judgecrandall
macrumors newbie
 
Join Date: Jul 2009
According to some reviews on Amazon, the Joby Ori for the iPad 2 will fit the new iPad with a little effort, though results are mixed. Can anyone here confirm that it will fit the new iPad?
judgecrandall is offline   0 Reply With Quote
Old Apr 26, 2012, 06:25 PM   #14
bigjohn
macrumors 6502
 
Join Date: Oct 2000
Location: Arcadia, CA
Quote:
Originally Posted by judgecrandall View Post
According to some reviews on Amazon, the Joby Ori for the iPad 2 will fit the new iPad with a little effort, though results are mixed. Can anyone here confirm that it will fit the new iPad?
It doesn't fit, the new iPad is too small (if that's even a thing to be concerned with).

----------

I've been having a great experience with the Vario-SC from Zero Chroma.

http://zerochroma.com/index_standard.php

It gives me that adjustable stand with protection I came to know and love with the Ori. It does sort of depend on the smart cover for some of the protection, but at least it makes the smart cover better than just the sc on it's own.
__________________
Big John
iPhone 6+, iPad 3, iPod Nano, Mac Pro (2x2.26 Nehalem), MacBook Pro 2.6 (Late 2013-DG), Mini, iBook G3, PM 7100/66, Apple IIe
bigjohn is offline   0 Reply With Quote
Old Jun 11, 2012, 06:12 PM   #15
DavidGl
macrumors newbie
 
Join Date: Jun 2012
shame ....

Loved my Ori for iPad 1 - have now moved on to iPad 3, such a shame Ori wont be along for the ride
DavidGl is offline   0 Reply With Quote

Reply
MacRumors Forums > iPhone, iPod and iPad > iPad > iPad Accessories

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Similar Threads
thread Thread Starter Forum Replies Last Post
Apple Launching Updated iPad Air in 2014, No 12.9-Inch iPad or New iPad Mini Until 2015 MacRumors MacRumors.com News Discussion 209 Jul 15, 2014 10:33 AM
Black Friday 2013: Best Deals on the iPad, iPad Air, and iPad mini MacRumors MacRumors.com News Discussion 90 Jan 6, 2014 09:45 AM
Apple Drops Refurbished iPad Prices, iPad Mini Now Available for $249, iPad 4 for $379 MacRumors iOS Blog Discussion 16 Oct 23, 2013 10:53 AM
iPad Mini: iPad 5 And Retina iPad Mini Will Be Announced October 22. 13" iPad Maxi In The Works. vmaniqui iPad 1 Oct 9, 2013 04:51 PM
Trouble deciding: iPad mini vs iPad 2 vs Retina iPad? Do NOT get an iPad 2. ThatsMeRight iPad 27 Oct 28, 2012 03:26 PM

Forum Jump

All times are GMT -5. The time now is 08:04 PM.

Mac Rumors | Mac | iPhone | iPhone Game Reviews | iPhone Apps

Mobile Version | Fixed | Fluid | Fluid HD
Copyright 2002-2013, MacRumors.com, LLC