Register FAQ / Rules Forum Spy Search Today's Posts Mark Forums Read
Go Back   MacRumors Forums > Apple Hardware > Apple TV and Home Theater

Reply
 
Thread Tools Search this Thread Display Modes
Old Apr 22, 2012, 08:16 PM   #1
foice
macrumors newbie
 
Join Date: Dec 2008
are optical audio and hdmi video both on and in sync?

Hello,
I am thinking about a new apple tv 3.
I would like to have it connected to my projector and my audio 2.1 analog speakers (harman kardon sound sticks iii).

I know that to connect to the analog speakers I have to use a digital-analaog converter. I found one that should be good for stereo audio for around 20$

http://www.amazon.com/Digital-Optica...5124676&sr=8-2

I was wandering if the setup that I have in mind will work, with the video on the projector through the HDMI and the audio to the 2.1 analog speaker through the optical out and the digital-analog converter.

Do the two outputs of the apple tv (HDMI and optical) work at the same time?
from the forum seems yes, but better be sure...

Is there any risk of de-sync?
here I did not find any comment on the forum ... any direct experience?

Thanks for the discussion
Roberto
foice is offline   0 Reply With Quote
Old Apr 22, 2012, 08:23 PM   #2
T5BRICK
macrumors 601
 
Join Date: Aug 2006
Location: Oregon
They seem to be in sync to me.

And yes, HDMI and the optical port can be on at the same time.
T5BRICK is offline   0 Reply With Quote
Old Apr 22, 2012, 08:47 PM   #3
foice
Thread Starter
macrumors newbie
 
Join Date: Dec 2008
hey T5BRICK! great news! thanks for posting it!

an important detail, are you connecting the digital output straight to some speakers or do you have a digital-analog converter?
foice is offline   0 Reply With Quote
Old Apr 22, 2012, 10:06 PM   #4
T5BRICK
macrumors 601
 
Join Date: Aug 2006
Location: Oregon
My optical output goes from my AppleTV to my receiver.
T5BRICK is offline   0 Reply With Quote
Old Apr 23, 2012, 06:53 AM   #5
Penquin79
macrumors member
 
Join Date: Jan 2011
There is a chance when using a converter that the audio will be slightly out of sync, true with anything when you add a component in between out put and the analog input of your amplifier. The better quality the converter the less chance of out of sync. This may be an example of going cheap is going to cause a problem. Most converters I have seen are at least $80.00.
Penquin79 is offline   0 Reply With Quote
Old Apr 23, 2012, 09:41 AM   #6
foice
Thread Starter
macrumors newbie
 
Join Date: Dec 2008
that is why I wanted to ask to people what was their experience ... good to know that the two outputs are both on, for the sync I would like to have some experience shared by people on the forum...

Anybody have some experience to share with the sync of the HDMI+Digital Out+DAC ?

Last edited by foice; Apr 23, 2012 at 10:40 AM.
foice is offline   0 Reply With Quote
Old Apr 23, 2012, 03:31 PM   #7
mchalebk
macrumors 6502a
 
Join Date: Feb 2008
I have an ATV3 connected via HDMI for zone 1 on my receiver and using an inexpensive $20 DAC for zone 2 (my patio). I have not noticed any sync issues when listening to music (and it would be fairly obvious, because we've got our windows open and can hear the inside speakers to some degree). I think you'll find that even cheap D/A converters will do it fast enough that any latency is negligible.
mchalebk is offline   0 Reply With Quote
Old Apr 24, 2012, 02:45 PM   #8
foice
Thread Starter
macrumors newbie
 
Join Date: Dec 2008
hey mchalebk, thanks for your post.
can you say the model of dac you're using? there are a few in the 20$ ballpark ...
as I said before I was thinking about this
http://www.amazon.com/Digital-Optica...5124676&sr=8-2

thanks for your replies
roberto
foice is offline   0 Reply With Quote
Old Apr 25, 2012, 01:45 PM   #9
mchalebk
macrumors 6502a
 
Join Date: Feb 2008
I bought this one (looks like it could be the same as the one you're looking at):

http://www.amazon.com/gp/product/B00...ls_o06_s00_i00

It's worth pointing out that I only use this for music, so no issues decoding surround sound audio. If your source has surround (i.e. Dolby Digital 5.1), you might need to select "stereo" (or something like that) on the ATV for it to work (the affordable DACs cannot decode surround audio).
mchalebk is offline   0 Reply With Quote
Old Apr 26, 2012, 02:52 PM   #10
foice
Thread Starter
macrumors newbie
 
Join Date: Dec 2008
yep it looks like it's the same stuff ... I'll try it! Thanks a lot for all the discussion!
foice is offline   0 Reply With Quote
Old Apr 27, 2012, 07:17 PM   #11
Bymatt
macrumors member
 
Join Date: Aug 2011
Think my system is 'normal'. My experience is....

Quote:
Originally Posted by foice View Post
Hello,
I am thinking about a new apple tv 3.
I would like to have it connected to my projector and my audio 2.1 analog speakers (harman kardon sound sticks iii).

I know that to connect to the analog speakers I have to use a digital-analaog converter. I found one that should be good for stereo audio for around 20$

http://www.amazon.com/Digital-Optica...5124676&sr=8-2

I was wandering if the setup that I have in mind will work, with the video on the projector through the HDMI and the audio to the 2.1 analog speaker through the optical out and the digital-analog converter.

Do the two outputs of the apple tv (HDMI and optical) work at the same time?
from the forum seems yes, but better be sure...

Is there any risk of de-sync?
here I did not find any comment on the forum ... any direct experience?

Thanks for the discussion
Roberto
I was running an HDMI cable of the proper spec from the ATV2 to an hdmi port on the AVR. All seemed ok. The eternal quest for MORE led me to add the optical tosslink from the ATV2 to the corresponding optical port on the AVR. Didnt notice much diff in anything. One day pulled out the tosslink while streaming an m4v movie from the iPad, works great. NO difference. pulled the hdmi cable and of course video AND sound stopped. Plugged in optical again and no sound. ON THE AVR, for the input at that HDMI port, it turns out there is a choice. Analog, HDMI, Optical. So thats interesting. Next ran the hdmi cable from the ATV2 up to the flat screen. Left the optical in the previous port and on the AVR set the port to optical.. PRESTO ! hdmi video and a much improved sound out of the 5.1 system. SOooo yes they can both be on, but with YOUR AVR, are they both contributing???? or do you need them both on and hdmi to the TV for video and the optical to the AVR to drive the sound system. Just my .02 Interested in any comments. This is not a request for help, unless someone thinks I am about to melt something , just a general comment.
Bymatt is offline   0 Reply With Quote
Old Dec 2, 2012, 10:26 AM   #12
jazytsax
macrumors newbie
 
Join Date: Sep 2009
result?

Sorry to revive this thread, but I recently did the same type of connection (ATV3 with hdmi for video straight to the TV and optical for audio directly to speakers) and have seen a small unsyncing with video lagging.

I assume its the digital-analog adapter I bought (cheap-monoprice). Did anyone find an adapter that didn't have an issue??
jazytsax is offline   0 Reply With Quote

Reply
MacRumors Forums > Apple Hardware > Apple TV and Home Theater

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Similar Threads
thread Thread Starter Forum Replies Last Post
XServe 2006: Supported Graphics Cards With HDMI or DVI with audio to hdmi iphone2g&3gfan iMac 3 May 30, 2014 04:42 PM
No audio, but video via HDMI? rockhard Apple TV and Home Theater 7 Jan 4, 2014 06:58 AM
HDMI to HDMI/Optical Cable? musicpenguy Apple TV and Home Theater 6 Jun 28, 2013 08:15 AM
Audio/Video Sync Problem Avi dkongee MacBook Pro 3 Jan 22, 2013 06:01 PM
Audio out of sync with video in iMovie badlydrawnboy Mac Applications and Mac App Store 0 Aug 3, 2012 10:51 AM

Forum Jump

All times are GMT -5. The time now is 06:55 AM.

Mac Rumors | Mac | iPhone | iPhone Game Reviews | iPhone Apps

Mobile Version | Fixed | Fluid | Fluid HD
Copyright 2002-2013, MacRumors.com, LLC