Go Back   MacRumors Forums > Apple Hardware > Mac Peripherals

Reply
 
Thread Tools Search this Thread Display Modes
Old Aug 25, 2005, 02:16 PM   #1
OCOTILLO
macrumors regular
 
Join Date: Mar 2005
Location: Houston, TX
Mighty Mouse - Scrolling Problem

I recently developed a scrolling problem with my Mighty Mouse. It started to only vertical scroll in one direction. I reinstalled the software and it did not help. So, I called Apple tech support. While waiting on the line, I decided to press quite hard on the scroll button and try to scroll. That cured the problem, after that it only required the normal light touch to work properly. I do not know what was the cause of the problem, maybe dust(?), in any event it is working fine now.
OCOTILLO is offline   0 Reply With Quote
Old Aug 25, 2005, 02:44 PM   #2
AmigoMac
macrumors 68020
 
AmigoMac's Avatar
 
Join Date: Aug 2003
Location: l'Allemagne
Fine, it means you don't need answers here, right?, being polite I just say, fine.

*goes to the corner and waist for the BT mighty thing*
__________________
No Mac no fun...
AmigoMac is offline   0 Reply With Quote
Old Aug 25, 2005, 03:30 PM   #3
OCOTILLO
Thread Starter
macrumors regular
 
Join Date: Mar 2005
Location: Houston, TX
Quote:
Originally Posted by AmigoMac
Fine, it means you don't need answers here, right?, being polite I just say, fine.

*goes to the corner and waist for the BT mighty thing*
Thanks for stating the obvious. I posted this as information should anyone else run into the same problem.
OCOTILLO is offline   0 Reply With Quote
Old Sep 1, 2005, 01:00 PM   #4
sucralose
macrumors newbie
 
Join Date: Sep 2005
actually, i am having the same problem.... the mm scrolls up but not down for some reason.... pushing hard on the scroll ball didn't help.....
sucralose is offline   0 Reply With Quote
Old Sep 1, 2005, 01:07 PM   #5
g4cubed
macrumors 6502a
 
g4cubed's Avatar
 
Join Date: Jun 2004
I read on another thread (can remember exact one) that someone was asking how to clean the ball, with no answer. I wonder if that is part of your problem. Finger oils and dust can play hell on some things.
__________________
10 years ago we had Johnny Cash, Steve Jobs and Bob Hope...
Now we have no cash, no jobs and no hope.
g4cubed is offline   0 Reply With Quote
Old Sep 1, 2005, 01:26 PM   #6
mynameisjesse
macrumors member
 
Join Date: Aug 2005
Location: new york.
Send a message via AIM to mynameisjesse
wow!

i JUST had this problem yesterday. i was about to take it to the apple store but then i decided to just push on it really hard. yep it fixed it for me too(i couldnt scroll upwards). but then a few hours later i couldnt scroll down, so i tried again. at first the pushing hard didnt work but eventually it did. it felt like something was stuck inside there, a woodchip i think, and pushing it hard simply pushes it out.
mynameisjesse is offline   0 Reply With Quote
Old Sep 3, 2005, 02:51 AM   #7
lazydog
macrumors 6502a
 
Join Date: Sep 2005
Location: Cramlington, UK
Send a message via MSN to lazydog
Quote:
Originally Posted by OCOTILLO
Thanks for stating the obvious. I posted this as information should anyone else run into the same problem.
I had exactly the same problem and your solution works. So thanks for the post, it saved me a lot time and effort. Nothing wrong with posting a question and a solution, after all the whole point of these forums is to help other people which is exactly what you did!

Ben
lazydog is offline   0 Reply With Quote
Old Sep 5, 2005, 07:43 AM   #8
Zim Bargo
macrumors member
 
Join Date: Jan 2004
Location: London
I haven't had that problem but something even more annoying started happening over the weekend.

Firstly - it would suddenly initiate both expose and dashboard - often simultaneously but sometimes just one or the other. There is no way that I either squeezed or pressed the scroll button when this happened so it wasn't just an accident, and has happened far too many times now to be a one off.

Secondly - the cursor would jump to the other side of the screen for no reason - usually jumping to the left.

Finally (and I doubt this is a problem with the mouse, but with everything else playing up who knows?) working in cubase vertical scrolling works fine but all horizontal scrolling is inverted. It's like steering a boat with an outboard, but less intuitive. There are no options within Cubase to alter this either. that I can see.

Anyone had the same problems or do I have to take this thing back to the store?

Thanks

Zim
Zim Bargo is offline   0 Reply With Quote
Old Sep 5, 2005, 10:33 AM   #9
OCOTILLO
Thread Starter
macrumors regular
 
Join Date: Mar 2005
Location: Houston, TX
Quote:
Originally Posted by Zim Bargo
I haven't had that problem but something even more annoying started happening over the weekend.

Firstly - it would suddenly initiate both expose and dashboard - often simultaneously but sometimes just one or the other. There is no way that I either squeezed or pressed the scroll button when this happened so it wasn't just an accident, and has happened far too many times now to be a one off.

Secondly - the cursor would jump to the other side of the screen for no reason - usually jumping to the left.

Finally (and I doubt this is a problem with the mouse, but with everything else playing up who knows?) working in cubase vertical scrolling works fine but all horizontal scrolling is inverted. It's like steering a boat with an outboard, but less intuitive. There are no options within Cubase to alter this either. that I can see.

Anyone had the same problems or do I have to take this thing back to the store?

Thanks

Zim
I have occasionally had the jumping cursor problem. I have no idea why it happens. So far it has not occurred often enough to get on my nerves. It has to be a mouse (or mouse firmware problem) since my one button BT mouse never did it.
OCOTILLO is offline   0 Reply With Quote
Old Sep 5, 2005, 10:41 AM   #10
ohcrap
macrumors 6502a
 
Join Date: Aug 2005
Anyone want to trade their Mighty Mouse for an Apple BT Mouse? Paid $60 for it, just like brand new, works perfectly, no cosmetic faults whatsoever.. PM me!
__________________
ohcrap is offline   0 Reply With Quote
Old Sep 5, 2005, 03:14 PM   #11
Loge
macrumors 68000
 
Loge's Avatar
 
Join Date: Jun 2004
Location: England
I have observed the jumping cursor problem a few times when using a "smooth" mouse mat. When using the less smooth type, it works without any problems at all.
Loge is offline   0 Reply With Quote
Old Jul 14, 2006, 07:15 PM   #12
roustk
macrumors newbie
 
Join Date: Jul 2006
Quote:
Originally Posted by mynameisjesse
i JUST had this problem yesterday. i was about to take it to the apple store but then i decided to just push on it really hard. yep it fixed it for me too(i couldnt scroll upwards). but then a few hours later i couldnt scroll down, so i tried again. at first the pushing hard didnt work but eventually it did. it felt like something was stuck inside there, a woodchip i think, and pushing it hard simply pushes it out.
Thank you for the idea! Even though it didn't work for me but it gave me another idea. I used "Dust-Off" -- compressed gas duster to blow into the gap between the ball and the edge of the hole and it worked!
roustk is offline   0 Reply With Quote
Old Aug 25, 2006, 09:02 PM   #13
macit
macrumors member
 
Join Date: Feb 2006
Location: Austin, TX
I just had the same problem and googled it:: I should have expected the MacRumors forums to be one of the first hits I tired the pressing hard thing and it didn't work...

I took a more physical approach to the problem and took a thin paper clip to the ball of the mouse....

I would not recommend it because obviously there's something senstive under there but it worked for me!
__________________
- Luke
Quote:
Boom
macit is offline   0 Reply With Quote
Old Aug 25, 2006, 09:45 PM   #14
skiguy320@gmail
macrumors newbie
 
Join Date: Aug 2006
I already posted this on another topic, sorry to anyone who is annoyed by the double post. Could someone email me the driver for the BT mighty mouse, i lost my CD?

thanks,
michael
skiguy320@gmail is offline   0 Reply With Quote
Old Aug 25, 2006, 11:45 PM   #15
goborobo
macrumors newbie
 
Join Date: Aug 2006
Thanks for the Tip

Thanks for saving me from having to take this mouse apart, read tech articles etc. One firm push solved the problem.

As for AmigoMac: If ever there was a misnamed user he has it. Amigo? Hey Amigo, get friendly and SHUT UP when people are offering helpful advice or do you want to show the rest of us how knowledgeable you are by dissing another member? Think before you yap chap.

Thanks again Ocotillo. Is Hawaii the correct guess?
goborobo is offline   0 Reply With Quote
Old Nov 2, 2006, 11:59 AM   #16
alibabacamelman
macrumors newbie
 
Join Date: Nov 2006
mighty mouse scrolling problem

The scroll mechanism suffers from the ingress of debris, which cannot be removed without disassemblying the mouse - a rather tricky problem as it is sealed top to bottom. If you wish to have your mouse made good as new again, you can visit http://apple.nuget.net for more information.
Hoping we can tempt you to use our services!
alibabacamelman is offline   0 Reply With Quote
Old Nov 12, 2006, 06:18 AM   #17
coniak
macrumors newbie
 
Join Date: Nov 2006
Don't buy it

Quote:
Originally Posted by alibabacamelman View Post
The scroll mechanism suffers from the ingress of debris, which cannot be removed without disassemblying the mouse - a rather tricky problem as it is sealed top to bottom. If you wish to have your mouse made good as new again, you can visit http://apple.nuget.net for more information.
Hoping we can tempt you to use our services!
20 euros to have my mouse ball cleaned?! Thanks but no thanks!!! My ball was very very dirty. I tried cleaning it the way shown by Apple Support with no success for a while. Basically if doesn't work you just have to rub that ball harder and for a longer time. A good idea is to clean it whilst connected and with a scrollable page open. Once the vertical scrolling starts coming back keep going for a while. My mouse was warm verging on hot when i finished cleaning it! 20 euros to rub a mouse ball with a cloth, you must be kidding!
coniak is offline   0 Reply With Quote
Old Nov 12, 2006, 06:37 AM   #18
Queso
macrumors 603
 
Join Date: Mar 2006
Disconnect the mouse, then use dry unwaxed paper to push the ball in and roll it in all directions. Kitchen roll is perfect for the job. You'll see blobs of grease start to break off. Wipe these away with the paper to make sure they don't go back down the hole. Do this in all directions for a few minutes until the mouse ball feels rough (You should then remember this is how it felt in the beginning before you got your greasy mitts on it ). Repeat if necessary. Now when you move the mouse ball normally, you should hear the clicking noise to show it's working correctly with the rollers. Plug it back in and the scroll action should work again.

Remember, dry unwaxed paper. Don't use a moist cloth as Apple suggests.
Queso is offline   0 Reply With Quote
Old Nov 12, 2006, 07:10 PM   #19
peschomd
macrumors newbie
 
Join Date: Nov 2006
Nintendo

Yes, its' dust, just blow real hard like you did with old school Nintendo NES
__________________
Visit Me Online

Caffeine Marketing . com - Daily Advertising News
peschomd is offline   0 Reply With Quote
Old Nov 15, 2006, 03:51 PM   #20
alibabacamelman
macrumors newbie
 
Join Date: Nov 2006
mighty mouse scroll problem

Sorry to disappoint you blowers and suckers - the problem is an internal one and no long term solution can be obtained except by open-mouse surgery. I have suggested to Apple that they ought to make the mouse openable for routine cleaning and, perhaps, they might do that - it would only need a snap-on ring to hold the parts together. It is a mighty mouse which can suffer from 'appendicitis' affecting, not just the ball, but the cogwheels running on it.
alibabacamelman is offline   0 Reply With Quote
Old Nov 16, 2006, 03:49 AM   #21
trapperjohn117
macrumors newbie
 
Join Date: Sep 2006
Quote:
Originally Posted by alibabacamelman View Post
Sorry to disappoint you blowers and suckers - the problem is an internal one and no long term solution can be obtained except by open-mouse surgery. I have suggested to Apple that they ought to make the mouse openable for routine cleaning and, perhaps, they might do that - it would only need a snap-on ring to hold the parts together. It is a mighty mouse which can suffer from 'appendicitis' affecting, not just the ball, but the cogwheels running on it.

yep, only way to really fix it, the main problem with that though is that the magnetic rollers are insanly small, and i lost one of them, rendering my scroll wheel useless. i made a thread about said lost roller a few days ago, i just went out and bought a new one after i couldnt find the roller. those things do get really dirty though, and there kind of hard to reseat once you take them out of there place's, if apple would have to redesign the mouse to make it actually service able to the "average" user.

edit: heres the guide i followed the first time i took the thing apart, you can see the rollers and how dirty they get.
http://web.mac.com/karelgil/iWeb/Mac...ightyMEng.html
__________________
stock blackbook
trapperjohn117 is offline   0 Reply With Quote
Old Nov 16, 2006, 03:56 AM   #22
BengalDuck
macrumors regular
 
Join Date: Oct 2006
I have this problem ALL THE TIME. I'm thinking about taking sand paper to the little ball.

Are the wireless ones any better? I'd like to get a wireless MM but if the ball still F's up I might not.
BengalDuck is offline   0 Reply With Quote
Old Nov 16, 2006, 03:58 AM   #23
dalvin200
macrumors 68040
 
Join Date: Mar 2006
Location: Nottingham, UK
Quote:
Originally Posted by BengalDuck View Post
I have this problem ALL THE TIME. I'm thinking about taking sand paper to the little ball.

Are the wireless ones any better? I'd like to get a wireless MM but if the ball still F's up I might not.
I have the wireless one, and after 3 weeks i couldn't scroll up and down..
I reported it to Apple who sent out of a replacement, but in the meantime I tried what one of the forum members said, which was to press hard on the scroll wheel and force it forward/backward.. and by magic.. it all worked again!!

Still, Apple had already sent me the new replacement MM, so I just used that and sent the faulty one that I got to work again, back
__________________
Search before you post: MRoogle
dalvin200 is offline   0 Reply With Quote
Old Nov 16, 2006, 10:28 AM   #24
thewhitehart
macrumors 6502a
 
thewhitehart's Avatar
 
Join Date: Jul 2005
Location: The town without George Bailey
Send a message via AIM to thewhitehart Send a message via Yahoo to thewhitehart
Quote:
Originally Posted by dalvin200 View Post
I have the wireless one, and after 3 weeks i couldn't scroll up and down..
I reported it to Apple who sent out of a replacement, but in the meantime I tried what one of the forum members said, which was to press hard on the scroll wheel and force it forward/backward.. and by magic.. it all worked again!!

Still, Apple had already sent me the new replacement MM, so I just used that and sent the faulty one that I got to work again, back
SIX DAYS on my replacement mighty mouse, and I couldn't scroll up. I thought the bluetooth model would fix this, but apparently it hasn't. I rubbed it furiously, and it temporarily fixed it, but I'm sure I'll have the problem again.

This product's scroll ball makes it absolutely rubbish, I'm sorry. Didn't they do any testing on it? I'm an obsessed clean freak, and my fingers are never greasy, or really naturally oily for that matter. This shouldn't be happening.
__________________
Have a great summer! - Winnie Cooper
thewhitehart is offline   0 Reply With Quote
Old Nov 17, 2006, 10:37 AM   #25
alibabacamelman
macrumors newbie
 
Join Date: Nov 2006
stop scratching your balls

It's time people stopped scratching their balls and started to penetrate directly by writing to Apple at 1 Infinitity Way, Cupertino or email Steve. This is a ball-breaking issue in which one little smutty ball should not become a source of annoyance and a reason to give up on this uniquely agile mouse and return to the Microsoft monster.
It is simply that the ball must be held under a retractable disk of about 16mm diameter similar to those used to hold in the balls of pre-optic mice so that it can be serviced regularly.
Would you buy a car that hadn't got a window washer - not unless you wanted to keep it in a sterile garage or, perhaps, from a used car salesman, similarly Apple must be let know that our mice live in the real filthy world and should be designed to take fair wear and tear.
alibabacamelman is offline   0 Reply With Quote

Reply
MacRumors Forums > Apple Hardware > Mac Peripherals

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Similar Threads
thread Thread Starter Forum Replies Last Post
Mighty Mouse vs. Magic Mouse hungx Mac Peripherals 4 Apr 14, 2014 05:18 AM
Wireless mighty mouse, magic mouse Jmouse Mac Peripherals 1 Jun 28, 2012 02:05 AM
Wired mouse comparable to mighty mouse? 4 way scrolling? JesterJJZ Mac Peripherals 0 Jun 19, 2012 01:05 AM
Mouse Scrolling saberahul Mac OS X 10.7 Lion 0 Jun 10, 2012 10:44 AM

Forum Jump

All times are GMT -5. The time now is 12:26 AM.

Mac Rumors | Mac | iPhone | iPhone Game Reviews | iPhone Apps

Mobile Version | Fixed | Fluid | Fluid HD
Copyright 2002-2013, MacRumors.com, LLC