|Nov 14, 2012, 02:29 PM||#1|
Replacing Hard Drive: Time machine or cloning?
I wanna replace my hard drive. I want everything exactly as it is now on the new hard drive - apps, documents, data, everything. Will a time machine backup do that for me? Or should I just clone the drive? If so, are there recommended cloning freeware?
The last time I replaced a HD a macbook, it was new so I didn't have any 3rd party software or data on it.
|Nov 14, 2012, 03:40 PM||#3|
I will go....
with a clone. In my experience, the cloning it is better. Saying the latter, CarbonCopyCloner always has worked very well for me
Mac Pro 2012 3.06 Westmere version, 12 Core 64 GB RAM, 4 TB , iPhone 5 (black), Moto G 8 GB (black)
|Nov 14, 2012, 03:48 PM||#5|
Cloning 100%. i recommend Carbon Copy Cloner, it's no longer freeware but its a great piece of software. I've used it for this exact purpose numerous times & its seamless.
Time Machine is ok, but restoring full systems with it using Migration Assistant can sometimes mean you need to re-activate licensed apps, ones from the Mac App Store will also need your apple Id the first time you open them.
I admit it, i spend too much on products
|Nov 14, 2012, 05:15 PM||#6|
I recently migrated from the 500gb drive in my MBP to a 1TB drive using Migration Assistant. The process is simple and once migrated there was no discernible different from the old drive other than more space (ie: it was as if I cloned) and the bonus was that I had the recovery partition in tact (which I believe is not the case with cloning). The process is:
1. create recovery flash drive using Apple's utility.
2. replace drive in your Mac and install fresh Lion or Mountain Lion using newly created recovery flash drive.
3. place old drive in USB enclosure.
4. From newly installed OS use migration assistant and migrate user/apps etc to new drive.
Works very nicely.
5S, MBP, MBA, 4S
|Nov 14, 2012, 05:45 PM||#7|
I've done this a number of times and have always had good luck cloning with Carbon Copy Cloner. Carbon Copy Cloner is free for "evaluation" purposes for 30 days or something like that.
For me, I use a USB external drive that I can easily remove from the case, like these clear ones at OWC:
Here is what I do:
This works well for upgrading to an SSD drive also...
|Nov 15, 2012, 05:02 AM||#10|
1. Buy an external hard drive. Make sure the case can be opened. (The last one I bought for a friend was screwless. Took some patience and brute force to open it without damaging it).
2. Plug in the external drive. Disk Utility to copy your hard drive completely to the new one.
3. Boot from the external drive to see if everything works.
4. Open the external drive, open the Mac, swap drives, reboot. Keep the original drive untouched for a few weeks.
|Nov 15, 2012, 09:57 AM||#11|
"I wanna replace my hard drive. I want everything exactly as it is now on the new hard drive - apps, documents, data, everything. Will a time machine backup do that for me? Or should I just clone the drive? If so, are there recommended cloning freeware?"
Clone it first. Use the FREE version of CarbonCopyCloner (version 3.4.7) which can be found here:
(Note: disregard the blurb that it's for Tiger & Leopard only. It works fine with later versions of the OS)
Do you have an external enclosure to use for cloning, BEFORE you install the new drive?
If not, consider one of these gadgets (they will run you about $20-25):
(many items shown, they all work the same, just pick one you like that's cheap)
Hook the dock to the Mac.
Put the drive in.
Turn it on.
Initialize it with Disk Utility.
On the left, choose your source (old) drive.
On the right, choose your target (new) drive.
Choose to backup everything.
When you're done, DO A TEST BOOT BEFORE you swap.
How to boot from the dock:
- Power down the Mac (all the way down, power off)
- Turn on the dock (with the new drive in it)
- Press the Mac's power on button
- As soon as you hear the startup sound, hold down the option key and KEEP HOLDING IT DOWN
- In a few moments, the startup manager will appear
- You should see both your internal drive and the docked drive. Use the tab or arrow key to choose the docked drive, then hit the return key.
- The Mac should boot from the docked drive (WARNING: it will look just like the internal looked, you need to go to "about this Mac" to see from which drive you're running.
If all is well after the test boot, NOW it's time to "do the swap"
Keep the dock and old drive, and use that as your "emergency booter".
|Thread Tools||Search this Thread|
|thread||Thread Starter||Forum||Replies||Last Post|
|How do I backup only my OS hard drive in Time Machine?||eyeangle||OS X Mavericks (10.9)||3||Apr 24, 2014 08:07 AM|
|Replacing/Cloning my hard drive||HDreplacee||Mac Basics and Help||10||Jan 15, 2014 11:45 AM|
|Moaning Hard Drive / Time Machine||PatientWaiter||MacBook Pro||1||Dec 3, 2013 12:47 PM|
|Time Machine Hard Drive going...going..gone...||StanleyYelnats||Mac Basics and Help||2||Jul 21, 2013 06:44 PM|
|Time Machine not backing 2TB hard drive to 2 TB External Drive||safetybelts||iMac||12||Jun 3, 2012 05:15 PM|
All times are GMT -5. The time now is 09:55 AM.