Go Back   MacRumors Forums > iPhone, iPod and iPad > iPhone

Reply
 
Thread Tools Search this Thread Display Modes
Old Dec 9, 2010, 07:46 PM   #1
jackapple
macrumors member
 
Join Date: Jun 2009
Authentic carbon fiber back plate for iPhone 4?

Has anyone come across a real carbon fiber back plate for the iPhone 4? I do not mean a skin, but rather an authentic plate, like the replacement stainless and black covers on the cnn site.

I understand there are alternative cases out there like the monCarbone Hovercoat, but I want to be able to use docks and accessories with the phone without having to deal with removing an exterior case. My current Apple bumper that I've used since launch has become burdensome having to remove it every time I want to play music in my car or via speaker docks.

Also, if anyone has the Element Vapor Carbon Fiber Back Plate, I've read that this is "real carbon fiber" but yet I noticed on YouTube review videos that it's seemingly a decal with 3M adhesive like SGP, iCarbons, and the rest. Any owners care to clarify?

Thanks!
jackapple is offline   0 Reply With Quote
Old Dec 9, 2010, 09:16 PM   #2
OrangeSVTguy
macrumors 601
 
OrangeSVTguy's Avatar
 
Join Date: Sep 2007
Location: Northeastern Ohio
Element charges $30 for their carbon skin! I've heard SGP has the better one if you want to get one. I don't think I've seen a real woven carbon fiber one and if I did, would cost as much or if not more than the Element Vapor itself lol.

I'd highly recommend the Invisible shield for the back. I prefer the stock look the most but everyone is different.
__________________
Browsing the forums from my Powerbook G4
OrangeSVTguy is offline   0 Reply With Quote
Old Dec 9, 2010, 09:21 PM   #3
KSKENE247
macrumors member
 
Join Date: Jun 2010
Quote:
Originally Posted by jackapple View Post
Has anyone come across a real carbon fiber back plate for the iPhone 4? I do not mean a skin, but rather an authentic plate, like the replacement stainless and black covers on the cnn site.

I understand there are alternative cases out there like the monCarbone Hovercoat, but I want to be able to use docks and accessories with the phone without having to deal with removing an exterior case. My current Apple bumper that I've used since launch has become burdensome having to remove it every time I want to play music in my car or via speaker docks.

Also, if anyone has the Element Vapor Carbon Fiber Back Plate, I've read that this is "real carbon fiber" but yet I noticed on YouTube review videos that it's seemingly a decal with 3M adhesive like SGP, iCarbons, and the rest. Any owners care to clarify?

Thanks!
chances are u wont cause carbon fiber isnt thin, and it cant really just be cut, the edge are folded over and would create it to be uneven... so chances are u wont see it... but i agree, i couldnt stant my bumper so i just dont use anything now
KSKENE247 is offline   0 Reply With Quote
Old Dec 10, 2010, 03:38 AM   #4
jackapple
Thread Starter
macrumors member
 
Join Date: Jun 2009
Thanks for the replies. I guess it was just wishful thinking! Is there a particular carbon or clear shield you have experience with that does not suffer from flash wash? I read in another thread that the single hole cutouts typically are better than the individual camera and flash holes. Any thoughts?
jackapple is offline   0 Reply With Quote
Old Dec 10, 2010, 06:15 AM   #5
JadedBen
macrumors regular
 
Join Date: Aug 2009
Location: Essex, UK
Quote:
Originally Posted by KSKENE247 View Post
chances are u wont cause carbon fiber isnt thin, and it cant really just be cut, the edge are folded over and would create it to be uneven... so chances are u wont see it... but i agree, i couldnt stant my bumper so i just dont use anything now

Huh? I'm guessing you've never worked with carbon before , but carbon fiber is very thin, or it can be thick, depending on what grade/ weave you're using, wether it's pre-preg or not, etc. Carbon fiber items are built up in layers, so can be any thinkness you need, generally the cloth is about 0.5-1mm thick, well the stuff i used to work with was.

But how thin would you you want it to be? The glass back itself i'd imagine is a good few mm's thick, the same thickness (or even thinner) of carbon sheet would be both lighter & stronger than the glass anyway, as long as it's been post cured in an autoclave.

And isn't the glass back set into a plastic frame? So if you were to set it in the frame as the glass is, edges wouldn't be a problem, as it would not have to be folded over anything.. and even if it were, the vacuum in the autoclaving process should bring that down. Also, it can be cut very easily, if you have the right equipment, which one would assume the person making the items has.

I'd personally love a full carbon back, but not sure how the gloss in the gelcoat would affect the flash, and although carbon is a pretty good signal blocker (unlike kevlar), if it would affect the signal? It shouldn't as the antenna is external as we all know, but it seems some of those stainless backs have been affect it


Hopefully someone will come out with one soon before the i5hone gets here
JadedBen is offline   0 Reply With Quote
Old Dec 10, 2010, 07:04 AM   #6
kAoTiX
macrumors 6502
 
Join Date: Oct 2008
Location: Midlands, UK
I would LOVE a carbon fiber cover. I have 2 custom ones at the moment which I switch every few weeks, a blue one and a metalic (silver) one.

I was considering making my own carbon fiber version, I can get the frames (that the glass ones go into) and you could either get some carbon fiber sheets yourself and just cure them yourself after cutting to size or, I have a griffin etch case which has a plastic carbon like rear section which 'looks' about the size of the actual rear cover part. if you cut that out and put it into the frame it might work.

if i can get hold of another one of these cases I might give it a go.
if you do find anything though, I would love to hear about it.
__________________
Contact me for iPad/iPhone/iPod parts & repairs in the UK (West Midlands)
Google Nexus One iPhone 4 32GB Black Macbook Pro 17" 500GB HDD & 2GB RAM
kAoTiX is offline   0 Reply With Quote
Old Dec 10, 2010, 07:19 PM   #7
jackapple
Thread Starter
macrumors member
 
Join Date: Jun 2009
It looks there may be hope! I just came across this on the Atomic iPhone Case Facebook page:

Another hot product releasing soon is our new F1 Carbon backplate. Now precision cut true carbon fiber, gloss coated, and with the apple logo stamped out. Visit our website for these amazing new products.

http://www.facebook.com/pages/Atomic...9441204?v=wall

I emailed them about it since I couldn't find it anywhere on their site, so hopefully I'll get a reply soon.
jackapple is offline   0 Reply With Quote
Old Dec 26, 2012, 10:56 PM   #8
mortfe
macrumors regular
 
Join Date: May 2008
Has anyone found a rigid carbon fiber back plat for iPhone 5? Don't want a case, just rigid plate. Thanks
mortfe is offline   0 Reply With Quote

Reply
MacRumors Forums > iPhone, iPod and iPad > iPhone

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Similar Threads
thread Thread Starter Forum Replies Last Post
Carbon fiber back! Jeffy499 iPhone Accessories 35 Oct 26, 2012 11:09 AM
carbon fiber back pieces and bodyguardz center piece. check it out x-evil-x iPhone Accessories 29 Oct 2, 2012 03:33 PM
Installed Body Guardz carbon fiber back skin for iphone 5 imaginex20 iPhone Accessories 14 Sep 27, 2012 01:55 AM
Does anybody make carbon fiber covers for the back glass pieces? x-evil-x iPhone Accessories 3 Sep 20, 2012 09:06 AM

Forum Jump

All times are GMT -5. The time now is 10:36 PM.

Mac Rumors | Mac | iPhone | iPhone Game Reviews | iPhone Apps

Mobile Version | Fixed | Fluid | Fluid HD
Copyright 2002-2013, MacRumors.com, LLC