Register FAQ / Rules Forum Spy Search Today's Posts Mark Forums Read
Go Back   MacRumors Forums > Special Interests > Digital Audio

Reply
 
Thread Tools Search this Thread Display Modes
Old Dec 20, 2005, 01:37 AM   #1
FFTT
macrumors 68030
 
FFTT's Avatar
 
Join Date: Apr 2004
Location: A Stoned Throw From Ground Zero
Affordable quality mic pre-amps

I've spent the last few weeks looking at just about every good quality 1 and 2 channel mic pre-amp available.

I'm not kidding, this was one of the most difficult purchase decisions I've ever had to make.


Instead of talking to music chains that mostly cater to wannabes, I went to the pro engineers and other project studio owners for their advice.

I must thank the members of OSXaudio and Gearslutz for all the help they've given me.

There are so many choices and the sky is the limit.

The best quality "affordable" offerings were:

The Groove Tubes Brick $399
http://www.groovetubes.com/


FMR Audio RNP (really nice preamp) $475.00 (at mercenary.com)
http://www.fmraudio.com/productspage.htm


The DAV electronics BG-1 $690.00 (direct sale only)
http://www.davelectronics.com/index.htm

The Universal Audio 610 and 110/Solo $799.00
http://www.uaudio.com/products/analog/index.html



The AMI TAB Funkenwerk V78 $975.00
http://www.mercenary.com/amitav.html


and the Brent Averill 1272 Single Channel pre $1089
http://www.brentaverill.com/1272/


You'll note that some are single channel pres and some are 2 channel.

Beyond this, it really makes more sense to get into the API 500 series compatible racks and lunchboxes.



You can buy totally PRO mic pres, compressors,limiters, EQ's as components from a large growing assortment of vendors.
Each component generally runs $500-$1650 but these are the finest.

API, Brent Averill, Neve, Old School Audio, Purple and so on.
The empty racks with power supply run $450-$899 and are all inter- compatible.

This is the way I would go if I had and extra $1000 to play with.
This also looks like the direction the next generation of engineers will be going since they can literally take " their sound " with them to any studio.


After MUCH consideration,

I went with the DAV BG-1
I wanted 2 good high quality clean channels for vocals, mic'd instruments and keyboards.

This unit is rock solid and is ideal for studio or stage.



Mick at DAV was the lead designer/engineer for Decca Records for 28 years.

Considering the caliber of DAVelectronics' clientel,
I was greatly impressed with how well I was treated.
All my concerns were answered in a friendly, professional and timely manner.

It's no wonder that word of his product line is spreading so rapidly.

I hope what I have learned with help some of you with your decision.

My next priority is a great all purpose vocal mic
and a good 2 channel compressor.

I'll keep you posted.
__________________
Don't look at me in that tone of voice!

Last edited by FFTT; Dec 20, 2005 at 10:58 AM.
FFTT is offline   0 Reply With Quote
Old Dec 20, 2005, 01:56 AM   #2
CanadaRAM
macrumors G5
 
CanadaRAM's Avatar
 
Join Date: Oct 2004
Location: On the Left Coast - Victoria BC Canada
I have been a fan (on paper at least) of the Really Nice Compressor and Really Nice Preamp. Almost got a RNC on eBay a while back but was sniped at the last moment.
__________________
Expert
Ex = former, no longer. Spurt = a leak, esp. when caused by water pressure. Expert = a has-been drip under pressure.
CanadaRAM is offline   0 Reply With Quote
Old Dec 20, 2005, 02:25 AM   #3
FFTT
Thread Starter
macrumors 68030
 
FFTT's Avatar
 
Join Date: Apr 2004
Location: A Stoned Throw From Ground Zero
The RNP's are supposed to be pretty darn good and better than most of the stuff you see in the big chain catalogs.

Two good channels for $475.00 isn't bad.
FMR Audio's RNC and RNLA are also considered pretty good buys in their
price range.

However, several of the people who just tried out their new BG-1's are now immediately putting their RNP's up for sale. It's that dramatic of a difference.

The BG-1 is very clean without coloring the sound and still very much
alive.

What really blew my mind in all this research is that not one person mentioned or recommend the Focusrite platinum series.

I do have to say that the Universal Audio solo models were neck and neck
for my business, but the exceptional service I received from MicK at DAV
won me over.

I also learned that someone extremely influential purchased a BG-1 the morning before I ordered mine.
__________________
Don't look at me in that tone of voice!
FFTT is offline   0 Reply With Quote
Old Dec 20, 2005, 02:30 AM   #4
CanadaRAM
macrumors G5
 
CanadaRAM's Avatar
 
Join Date: Oct 2004
Location: On the Left Coast - Victoria BC Canada
Quote:
Originally Posted by FFTT
However, several of the people who just tried out their new BG-1's are now immediately putting their RNP's up for sale. It's that dramatic of a difference.
OK, send'em my way, I'm not proud but I loves me a bargain.
__________________
Expert
Ex = former, no longer. Spurt = a leak, esp. when caused by water pressure. Expert = a has-been drip under pressure.
CanadaRAM is offline   0 Reply With Quote
Old Dec 20, 2005, 02:38 AM   #5
FFTT
Thread Starter
macrumors 68030
 
FFTT's Avatar
 
Join Date: Apr 2004
Location: A Stoned Throw From Ground Zero
Even though I would absolutely love to buy a matching DAV BG-6 compressor,
I'll probably end up going for the RNC/RNLA combo rack for $430.00

The DAV BG-6 goes for $799 and it's really beyond my reach for now.
__________________
Don't look at me in that tone of voice!
FFTT is offline   0 Reply With Quote
Old Dec 20, 2005, 03:23 AM   #6
FFTT
Thread Starter
macrumors 68030
 
FFTT's Avatar
 
Join Date: Apr 2004
Location: A Stoned Throw From Ground Zero
I'm also talking to an expert about getting my father's vintage '50's
Ampex 403-P pre-amp restored if at all possible.



__________________
Don't look at me in that tone of voice!
FFTT is offline   0 Reply With Quote
Old Dec 20, 2005, 10:24 AM   #7
steelphantom
macrumors 6502a
 
steelphantom's Avatar
 
Join Date: Oct 2005
I've heard a ton of great things about the GT Brick. I'm considering picking one of those up in the near future. I've never heard of the BG-1 before. I'll have to look into that one.
steelphantom is offline   0 Reply With Quote
Old Dec 20, 2005, 10:30 AM   #8
WinterMute
Moderator emeritus
 
WinterMute's Avatar
 
Join Date: Jan 2003
Location: London, England
Send a message via AIM to WinterMute Send a message via MSN to WinterMute
Excellent work FFTT, I've stuck this post as a good resource for others searching as this question comes up a lot.
__________________
"Everything in excess, moderation is for monks..." Lazarus Long
--
PotPPP, MoDTPPP
WinterMute is offline   0 Reply With Quote
Old Dec 20, 2005, 10:49 AM   #9
FFTT
Thread Starter
macrumors 68030
 
FFTT's Avatar
 
Join Date: Apr 2004
Location: A Stoned Throw From Ground Zero
The GT Brick is definitely on my wish list.
Fantastic quality and bang for the buck in a tube channel.

There are certainly even better stand alone pre-amps of all sorts out there,
but prices are $1200 and way up for most of them.

I was trying to review those more likely to work well in a project studio.

According to the engineers I talked to, once you go above $1000.00
for one component, it's time to start looking at the API 500 series professional rack gear that is found in most high end consoles.

Pre-amps are almost like another instrument.
Each one can add a certain flavor to your results.

In most cases 1 or 2 channels are all you need while laying down a track,
so unless you are recording an entire band or a full drum set live, this is the best way to go.
__________________
Don't look at me in that tone of voice!
FFTT is offline   0 Reply With Quote
Old Jan 8, 2006, 09:30 PM   #10
euphoriasonic
macrumors member
 
Join Date: Jan 2006
Location: LA
Just curious, did you even consider the Apogee Rosetta or Mini-Me pre's?!? They are a bit expensive, but are mostly found in high-end recording studios. I played with them at Full Sail
euphoriasonic is offline   0 Reply With Quote
Old Jan 16, 2006, 07:07 PM   #11
FFTT
Thread Starter
macrumors 68030
 
FFTT's Avatar
 
Join Date: Apr 2004
Location: A Stoned Throw From Ground Zero
Apogee is great gear, but I still needed so many other items, that blowing
so much for one component was out of the question.
__________________
Don't look at me in that tone of voice!
FFTT is offline   0 Reply With Quote
Old Jan 16, 2006, 11:00 PM   #12
euphoriasonic
macrumors member
 
Join Date: Jan 2006
Location: LA
Quote:
Originally Posted by FFTT
Apogee is great gear, but I still needed so many other items, that blowing
so much for one component was out of the question.
i totally hear you there. thanks for the research info, you had one up there i hadn't considered. good deal
euphoriasonic is offline   0 Reply With Quote
Old Jan 18, 2006, 03:39 AM   #13
zimv20
macrumors 601
 
zimv20's Avatar
 
Join Date: Jul 2002
Location: chicago
Quote:
Originally Posted by euphoriasonic
Just curious, did you even consider the Apogee Rosetta or Mini-Me pre's?!?
the rosetta line doesn't have pre's, they're converter-only boxes. and the mini-me has conversion built-in, so imo it's a bit out of place in a conversation about preamp boxes.

i've found the rosetta800 conversion to be pretty darn good, though. plus, i rented an ad-16x for a tape dump project recently and was definitely impressed.
__________________
Oct 2011: check out my band's first album @ boxsetauthentic.com
zimv20 is offline   0 Reply With Quote
Old Jan 18, 2006, 03:44 AM   #14
zimv20
macrumors 601
 
zimv20's Avatar
 
Join Date: Jul 2002
Location: chicago
fftt -- so long as we're around the $1000/channel range, i think the phoenix drs-1 should definitely be added to the list. it's my go-to pre these days.




also, don't forget the brent averill 312a. it's what i use when i feel i'm using the drs-1 too much :-)



__________________
Oct 2011: check out my band's first album @ boxsetauthentic.com

Last edited by zimv20; Feb 3, 2007 at 01:35 AM. Reason: fix broken links
zimv20 is offline   0 Reply With Quote
Old Jan 18, 2006, 04:49 AM   #15
FFTT
Thread Starter
macrumors 68030
 
FFTT's Avatar
 
Join Date: Apr 2004
Location: A Stoned Throw From Ground Zero
Zim, you and the rest of the gang over at OSXaudio and Gearslutz have proven to be right on helping me to get my system rolling.

I was pretty much maxing out my budget spending $680USD for my BG-1,
but yes the field goes wide open when you start hitting the $1000 mark.

A few comments from others about the BG-1
http://gearslutz.com/board/showthrea...7&page=1&pp=30
__________________
Don't look at me in that tone of voice!
FFTT is offline   0 Reply With Quote
Old Jan 18, 2006, 05:56 PM   #16
FFTT
Thread Starter
macrumors 68030
 
FFTT's Avatar
 
Join Date: Apr 2004
Location: A Stoned Throw From Ground Zero
Zim, you know more about this than I do.

Perhaps it might help others here if you could explain the primary difference between these outboard specialty preamps and those the average user might get in their typical A/D interface or their Mackie console.

BTW, I just caught the link to the new Apogee Ensemble, Maestro and the very cool Symphony PCI-Express card.

Impressive indeed!~~~
http://mixonline.com/news/headline/a...mphony-011806/
__________________
Don't look at me in that tone of voice!

Last edited by FFTT; Jan 18, 2006 at 06:16 PM.
FFTT is offline   0 Reply With Quote
Old Jan 18, 2006, 06:52 PM   #17
zimv20
macrumors 601
 
zimv20's Avatar
 
Join Date: Jul 2002
Location: chicago
Quote:
Originally Posted by FFTT
Perhaps it might help others here if you could explain the primary difference between these outboard specialty preamps and those the average user might get in their typical A/D interface or their Mackie console.
well, each piece has to be judged on its own merits and its applicability in a certain application, of course. and within the user's budget.

that said, i believe that you more or less get what you pay for. when looking at, say, a $1280 mackie onyx 1640 vs. the $1450 2-channel brent averill 312a, it's useful to do a quick calculation on what might have been spent on each preamp.

for the BAE, figure $500/channel plus $500 for the housing and power supply.

for the onyx, if we figure $500 for the housing, power supply, monitoring section and converters, that leaves $780 for 16 channel strips, or under $50 per channel. even if half goes to the preamp, that's only $25. note, however, that this calculation ignores differences in volume pricing and labor costs (BAE is made in california, mackie in china).

regardless, that's one way of looking at it. i've not heard the onyx so i can't say whether the BAE pre is 20x better. plus it really depends on user needs, anyway. if i were recording a full band, i'd rather have the board than only 2 channels of BAE, for example.

otoh, if the goal is sonic performance, one would be right to be drawn towards the pricier pieces. imo, my BAE 312a kicks the living crap out of the pre's on my (now broken) mackie 1642.

lastly, one way to judge a preamp is to see how well, at mix time, it stacks up against other tracks recording with the same pre. this is where my mackie board utterly failed, and the FMR RNP shined. such a test helps reveal preamp deficiencies where a user's monitoring setup may otherwise cloud the picture.
__________________
Oct 2011: check out my band's first album @ boxsetauthentic.com
zimv20 is offline   0 Reply With Quote
Old Feb 11, 2006, 07:31 PM   #18
Orrin Star
macrumors newbie
 
Join Date: Dec 2003
Location: Brooklyn, NY
Two more to consider under $1000: Hamptone and Sytek

I own the Sytek MPX 4aii (a 4-channel pre that retails for around $850)
and have recently heard some raves about the Hamptone (which comes in two varieties - tube an solid state - and is available in both kit for and pre-assembled and starts in teh mid $500s for the kits).
cf www.hamptone.com
Orrin Star is offline   0 Reply With Quote
Old Feb 20, 2006, 01:13 PM   #19
airkarol
macrumors 6502
 
Join Date: Nov 2005
My advice might not be amazing, but in my home studio, I use 2 m-audio octanes along with an M-Audio Firewire 1814. That gives me a total of 16 pre-amps. They all work great, and quality is good too.

-airkarol
__________________
Mac Book Pro
Dual 2.4 Ghz, 4GB, 160GB, 256 MB VRAM
airkarol is offline   0 Reply With Quote
Old Apr 12, 2006, 01:23 PM   #20
shake
macrumors regular
 
Join Date: Aug 2002
Location: Toronto, CANADA
as a professional audio engineer, i recently bought an API lunchbox with two mic-pres(512C), two EQ's (550A 3-band) and two compressors (525). www.apiaudio.com

this box is the best thing i have ever heard (next to an authentic neve). things recorded through the API stuff just "sits in the mix" better than any other pre-amp we own (we also have focusrite, neve and a few others). all the tonal quality and harmonics are all there. the EQ's are sweet and never sound harsh, no matter how much you boost or cut. and the compressors and absolutely sublime. really fast attack (15 microseconds!) but it doesnt sound compressed. still sounds natural and dynamic.

if i saved all the money i spent on POS gear in my time, i could have another lunchbox and maybe a u47 as well. if anyone here wants to get the "real deal" then API is it. you can still get them brand-new (like I did) rather than scour ebay for stuff that you dont know the history of. and beleive me, maintenance on vintage gear is a labor of love and lots and lots of cash.
__________________
PowerMac: Quad 2.5GHZ G5, 4GB RAM, Nvidia 7800GT, 20" Cinema Display
Rides: BMW R1150R, Burton Custom 162, Sector9 Padang, Specialized MTB
shake is offline   0 Reply With Quote
Old Jun 2, 2006, 03:01 PM   #21
netdog
macrumors 603
 
netdog's Avatar
 
Join Date: Feb 2006
Location: London
If you really want something on the cheap, I bought an M-Audio Firewire Solo and find that it works quite nicely.
__________________
We don't see the world as it is. We see it as we are. -Anais Nin
Classical Homeopath and Naturopathic Doctor in London
netdog is offline   0 Reply With Quote
Old Jun 3, 2006, 12:27 AM   #22
zimv20
macrumors 601
 
zimv20's Avatar
 
Join Date: Jul 2002
Location: chicago
Quote:
Originally Posted by netdog
If you really want something on the cheap, I bought an M-Audio Firewire Solo and find that it works quite nicely.
to really test a pre-amp: record 10 or more tracks through it, and see how easy it is to mix the song. this is where the pre's on a mackie VLZ board, for example, utterly fall apart.
__________________
Oct 2011: check out my band's first album @ boxsetauthentic.com
zimv20 is offline   0 Reply With Quote
Old Jul 21, 2006, 01:05 PM   #23
cschreppel
macrumors regular
 
Join Date: Jul 2006
Location: Boston, MA
Yeah,

If you can land some API or Neve stuff, you'll be amazed at the sound quality.

I just built a mic preamp that models a Neve pre...sounds pretty good.

However, when I'm doing a lot of drum tracking, I typically find myself going to my M-Audio Octane 8-channel ADAT preamp. It's about $600, but if you think you'll be doing more than 2 channels, it's definitely an option. I find it to be much cleaner than most of the other ADAT pre's on the market...like the Digimax LT and whatnot from Presonus.

The Octane, for all you engineering folk, has some nice options:

2 DI's on the first two channels
Pads on each channel
Phase reverse on every other channel
An M/S Matrix on channels 7-8.
cschreppel is offline   0 Reply With Quote
Old Jul 21, 2006, 01:45 PM   #24
zimv20
macrumors 601
 
zimv20's Avatar
 
Join Date: Jul 2002
Location: chicago
Quote:
Originally Posted by cschreppel
I just built a mic preamp that models a Neve pre
seventh circle?
__________________
Oct 2011: check out my band's first album @ boxsetauthentic.com
zimv20 is offline   0 Reply With Quote
Old Jul 21, 2006, 11:08 PM   #25
cschreppel
macrumors regular
 
Join Date: Jul 2006
Location: Boston, MA
I believe it was from there. A buddy of mine ordered all the parts and we're all building them together.
cschreppel is offline   0 Reply With Quote

Reply
MacRumors Forums > Special Interests > Digital Audio

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Similar Threads
thread Thread Starter Forum Replies Last Post
Does anybody make modern-style AV amps? blanka Apple TV and Home Theater 33 Sep 12, 2013 11:04 AM
Any iphone 5 portable amps yet? cuzo iPhone Accessories 1 Mar 9, 2013 08:24 AM
Facetime Mic quality! gwwwhhhaaattt iPhone 4 Sep 22, 2012 04:01 PM
Most affordable and good quality speakers for 20" 2009 iMac? RedCroissant Mac Peripherals 2 Aug 5, 2012 07:26 PM

Forum Jump

All times are GMT -5. The time now is 09:47 PM.

Mac Rumors | Mac | iPhone | iPhone Game Reviews | iPhone Apps

Mobile Version | Fixed | Fluid | Fluid HD
Copyright 2002-2013, MacRumors.com, LLC