|Nov 20, 2006, 02:12 PM||#1|
iBook G3 won't boot up - turns on, but no chime
Late last night, I ran into some problems with my iBook G3. It's the 700 Mhz model, with 384MB of RAM. Nothing else special in terms of hardware config (unless an Airport card is special). OS X 10.2.8.
Basically, the computer seemed to hang and I did a hard reboot, and upon starting up I got a folder with a flashing ? .
I can't seem to find my Install disc 1 to run Disk Utility or just boot up - hopefully I will find that when I go home tonight (or maybe I left it at my parent's place), but I checked using the Hardware Test CD and it didn't detect any problems.
I am having problems opening the CD drive, so I've had to open it using a paperclip. Sometimes it doesn't appear to be using the CD.
I also have run the Micromat test CD that came with Applecare (of course this machine is almost 4 years old so that's finished...) and it detected a problem with the Read Buffer last night, but then I guess the battery ran out while it was on the last test.
This morning, I ran the Read Buffer, Write Buffer, and Volume structure tests and the first two passed very fast (unlike last night), but the Volume Structure test failed. I'm not surprised since I've been aware I have issues with this before. I tried to repair before going to work but at one point it seemed to hang so I gave it another hard reboot.
Last night, I would sometimes get the apple logo with the spinning "clock", and sometimes I would get the ? but it would never get to the login screen.
Currently, it seems to just turn on and go to the normal blue screen but not display anything else. At some point, I have also stopped getting the startup chime, as well, which doesn't give me a good feeling.
That being said, if both the Apple Hardware Test and the Micromat software didn't detect anything physically wrong (unless volume structure is physical), does this mean my data should still be OK? Worst case scenario, I buy a new MacBook although I just bought a ticket to Japan so it's not a good time
Going to try safe mode tonight when I get home, if I can't locate my install disc and use that. (Can I boot using Install disc 2 and get to disk utilities?)
Any other suggestions? Will continue searching as I've seen some answers to similar problems.
One last thing, this morning, the machine loaded the Micromat CD quickly and burned through the tests I selected very fast. Last night, it was pretty slow. Probably unlikely, but maybe an issue with overheating?
Thanks for any and all help you guys can provide! Hoping I am not completely screwed
|Nov 20, 2006, 02:28 PM||#2|
2.66ghz Mac Mini Server(operating w/Mini OS)16gb ram!!!/1.67ghz Powerbook G5 15" DLHR/512mb 1st gen Shuffle/iPhone 16gb/30" ACD
|Nov 20, 2006, 03:19 PM||#3|
This doesn't sound like the video problem to me. I've had and repaired that one.
Sounds to me like it's either a hard drive on its last legs or a software problem.
Last edited by mick4394; Nov 20, 2006 at 03:20 PM. Reason: elaborated
|Nov 20, 2006, 05:35 PM||#4|
I hope it's not a video problem again, I actually had an issue with the display a year or more ago and got that fixed while I was still under Applecare.
Sounds like it's probably a hard drive issue - they did notice some minor issues with the drive back when they fixed that problem.
A couple other things of note - had a kernel panic a few weeks back, but after a hard reboot things were back to normal.
Also, had my iPod plugged in when the problem occurred last night. It seems to be fine, but could this have caused a problem?
Finally, if the drive is on it's "last legs" is there anything that can be done to save the data (or confirm whether it can be saved)? I'm not even sure what besides any email I would want to try and save, but it would be nice to at least be able to have the opportunity to salvage something.
One other thing, could I boot into disk utilities using a disc from my dad's iBook G4?
|Nov 20, 2006, 11:34 PM||#5|
Sounds like the hard drive is failing to me. AFAIK the install disks for the G3/G4 iBooks should work on whetever computer and running disk utility from one of those sounds like a good idea. Not sure the exact rules on the forum on this but if that doesn't work I think you could get an install disk from a peer-to-peer network and be perfectly justified, but that is just IMHO.
MB, 2.0Ghz, 2GB Ram, 80GB
|Nov 21, 2006, 01:48 PM||#6|
I finally found my iBook install disc, but couldn't get it to boot up - it seems to always load up the Apple logo with the spinning clock (sun? gear?) but gets stuck there.
Still no chime.
Bought a 6 pin - 6 pin Firewire cable and will try to backup my data to my parent's iBook or iMac since the Target Mode startup seems to work.
If it is my drive, what's the possibility of getting a new one? (Internally, I mean) Not sure how that would work on an iBook. Or am I just stuck buying a new MacBook?
|Thread Tools||Search this Thread|
|thread||Thread Starter||Forum||Replies||Last Post|
|iBook G3 won't boot from Panther CD - at my wit's end||MacDaddy967||PowerPC Macs||19||Sep 26, 2011 08:26 AM|
|2 things: iBook g3 won't turn on, and using 9.1 install CD without OS 9 Drivers:||In-Correct||PowerPC Macs||2||Jun 16, 2011 06:07 PM|
|Macbook Pro - Turns On, but does not boot. Help :(||neenja||MacBook Pro||16||Jun 9, 2011 06:29 AM|
|iBook 700mhz G3 won't boot up||Auryn||PowerPC Macs||3||Dec 11, 2008 03:22 PM|
|Quicksilver powers on but no chime, no video, no boot||sonicbuddha||PowerPC Macs||1||Dec 25, 2006 03:57 PM|
All times are GMT -5. The time now is 01:03 AM.