So I'm trying to set up my Mac on a Static IP, the thing is I can't get it to work. I have set everything up on my Mac just as the guides online say. I have tried configuring my router a number of ways, with no luck. I have a Wireless-B Linksys BEFW11S4. Can anyone help? I thought I knew what I was doing, but obviously don't.
Got a tip for us?
Let us know
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
Static IP Help
- Thread starter squeezy
- Start date
- Sort by reaction score
it would help a lot if you posted, what exactly you did and what settings you used on both, your Mac and your Router.
atszyman
macrumors 68020
Do you have a static IP from your ISP? Or are you just trying to get your Mac, on the backside of the router to have a static IP?
If the latter you can just leave the router with DHCP running and set the Mac up with a static IP address. However the static IP needs to start with 192.168.x.y. For Linksys the default for x is usually 1 so you end up with 192.168.1.y. Most Linksys routers usually start DHCP assignments at 100 so if you choose y<100 you can usually make sure you don't have IP conflicts on the internal network. Assignments over 100 (have to be less than 255 as well) might have problems on larger networks where you can't guarantee the order of computers booting, although small or single computer networks behind the router shouldn't have that problem very often.
If you're trying to get a static IP to the outside world you need to get one assigned by your Internet Service provider and you may have to talk to them to see how to get that setup on your router.
If the latter you can just leave the router with DHCP running and set the Mac up with a static IP address. However the static IP needs to start with 192.168.x.y. For Linksys the default for x is usually 1 so you end up with 192.168.1.y. Most Linksys routers usually start DHCP assignments at 100 so if you choose y<100 you can usually make sure you don't have IP conflicts on the internal network. Assignments over 100 (have to be less than 255 as well) might have problems on larger networks where you can't guarantee the order of computers booting, although small or single computer networks behind the router shouldn't have that problem very often.
If you're trying to get a static IP to the outside world you need to get one assigned by your Internet Service provider and you may have to talk to them to see how to get that setup on your router.
well there is two ways of getting static ip. one is from the router using either mac or a nat table second is network config on the system. the 1st one being better b/c when and if you leave yor network youll get a ip using dhcp. but you can look up your routers info and see if it supports static ip from either mac or somesort of table and im sure there are guides on the 2nd one posted here somewhere.
Sorry for leaving out so much info, I'm a dumbass.
I'm trying to get a static IP on my LAN. What I tried was changing my Macs settings under Network / TCP/IP to manually:
192.168.100 - IP
255.255.255.0 - Subnet
192.168.1.1 - Router
My router was setup to DHCP.
Trying that setup caused my internet to stop working. I tried resetting both my modem and router, but no luck. When I have it set to DHCP, it has the same exact address, so I don't get it.
I then tried setting my router to static IP, with the address 192.168.1.100, but I don't know if that was the right thing to do, and it didn't work anyway.
Hope that helps.
I'm trying to get a static IP on my LAN. What I tried was changing my Macs settings under Network / TCP/IP to manually:
192.168.100 - IP
255.255.255.0 - Subnet
192.168.1.1 - Router
My router was setup to DHCP.
Trying that setup caused my internet to stop working. I tried resetting both my modem and router, but no luck. When I have it set to DHCP, it has the same exact address, so I don't get it.
I then tried setting my router to static IP, with the address 192.168.1.100, but I don't know if that was the right thing to do, and it didn't work anyway.
Hope that helps.
just hit me. you have to setup your dns servers on your computer. should be able to find the ip's on your router config page. but might possibly be your missing dns info when you set to static.
Alright, this is from my router, not my modem.
Internet
Configuration Type
Login Type: DHCP
Internet IP Address: 192.168.254.1
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.254.254
DNS 1: 192.168.254.254
DNS 2: 0.0.0.0
DNS 3: 0.0.0.0
MTU: 1500
Is 192.168.254.254 what I need?
Internet
Configuration Type
Login Type: DHCP
Internet IP Address: 192.168.254.1
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.254.254
DNS 1: 192.168.254.254
DNS 2: 0.0.0.0
DNS 3: 0.0.0.0
MTU: 1500
Is 192.168.254.254 what I need?
atszyman
macrumors 68020
I think your problem is fairly simple.
You can set your Mac to use 192.168.1.100 as a static IP address, however you will also need to enter the DNS servers in the box provided. You can usually obtain these addresses from your router, or you can use some other DNS servers available on the net.
I found a couple listed here
if you scroll down there are a bunch listed by country....
dont belive so. should be able to login your router and see two dns server ip's for your internet provider. those are the ones you want to use.
atszyman
macrumors 68020
Why don't you believe me? I've used other DNS servers from the one provided by my ISP and they have worked fine. I did first mention that he should check his router for the provided addresses since those are going to be the easiest to obtain.
At any rate I think, we agree in our diagnosis, that the Mac needs the DNS servers specified when assigning a static IP. Without the DNS it cannot resolve any text url into the actual IP address to access.
Ah! I found them in my modem buried deep in a system log. I put them in, applied, tried a site, and it worked! Thanks for all the help!
atszyman
macrumors 68020
My bad, looked like you weren't believing that you could have alternate DNS servers when I read it... sorry about that.
atszyman
macrumors 68020
I know mine don't and since his is only wireless B I assume his was not "current" enough to handle this nifty trick.
mustang_dvs
macrumors 6502a
192.168.100 is not an IP address (IPv4 specifies a xxx.xxx.xxx.xxx address). If you meant 192.168.1.100, setting both the computer and the router IP to the same address is a bad idea, as you have two devices with one address, so nothing will work.
If 192.168.254.254 is the modem's LAN IP address, then this is right (assuming that your modem is acting as a DNS relay, as well). Either way, you do not want to set your computer's IP to 192.168.254.254 -- it'll conflict with another device.
I am a bit confused as to why your internal network is set-up to 192.168.1.xxx and your router is connecting to your modem's LAN port on a different IP range (192.168.254.xxx). The 192.168.xxx.xxx and 10.xxx.xxx.xxx ranges will not route outside of their local subnets, especially if your subnet mask is set to 255.255.255.0
That only works if:
- Your router supports DNS relay/caching
- Your router is properly configured, with the correct external DNS servers
apfhex
macrumors 68030
I used that method (listing the router's IP as DNS in my Mac's network settings) without problem and without manually entering any DNS servers in the router settings, at least not that I can recall. This was on an old wireless b Linksys. I suggest the OP give it a try.
Also it may or may not matter, but I would user an IP outside of the range of your routers dynamic addresses (say they're 192.168.1.100200 or something, so you could use 192.168.1.20 as the static IP).