Got a tip for us?
Let us know
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
Startup Question
- Thread starter menoinjun
- Start date
- Sort by reaction score
jelloshotsrule
macrumors G3
you can hold option... but i'm guessing you knew that and are looking for something to prompt you with the option without holding a key down... not sure of any way to do that myself..
jelloshots beat me to the post
Hold down option on startup to select OS 9 or X. This only works if the OSs are on seperate partitions.
Hold down option on startup to select OS 9 or X. This only works if the OSs are on seperate partitions.
jelloshotsrule
macrumors G3
ahh, i didn't know that...
i have os x and 9 on two different hard drives each... ie, 4 total systems... (don't ask why right now.. ha) and so i guess when i've done it i just see the two options- with whatever os the particular drive was set to startup from in startup disk eh?
that makes sense. i wondered why i couldn't really "change" which one i used on a particular drive.. see, it's good that you put your advice in, can all learn something
eyelikeart
Moderator emeritus
Mr. Anderson
Moderator emeritus
Ok, I went and tried it but it didn't work. I'm on a TiPB with both systems, OS9.2.2 and OSX.1.4 in different folders but the same disk (no partitions).
Rebooted holding the option key and got a screen I hadn't seen before (always fun) to the lower left and circular arrow button, upper middle a drive icon, lower right a right arrow button. I tried pressing the left button, nothing ( the little macOS9 graphic on the drive icon didn't change). Then I pressed the right arrow button and it booted to 9.2.2
What do I do to get it to select the other system folder?
Thanks
jelloshotsrule
macrumors G3
i recently tried that same thing for the first time and got the same result.
what confused me is that i have both 9 and x on 2 different drives (4 total sys folders) so i always see 2 options which have just happened to be x in one and 9 on the other every time. however i haven't figured out how to switch within a partition.
also, it takes a really long time for it to settle down enough for me to click the arrow to start up. quite a while... you had that as well? or can you just click it right away?
Mr. Anderson
Moderator emeritus
Yes, which made it hard to figure out what was going on. Someone chime in here and tell us what to do
thanks
you can do this, I saw a little openfirmware hack here:
http://www.resexcellence.com/hack_html_02/04-11-02.shtml
it's pretty easy to do, I use yaboot since I also run linux so I haven't tested this method myself.
-Max
http://www.resexcellence.com/hack_html_02/04-11-02.shtml
it's pretty easy to do, I use yaboot since I also run linux so I haven't tested this method myself.
-Max