Toggle sidebar Toggle sidebar
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

RAID on quicksilver

C

crashtd

macrumors newbie
Original poster
Hey guys i'm an ATA/IDE newb. How do i go about setting up a parity RAID setup on a G4 Quicksilver? What do i jump my drives to? Can i run the system (10.2) on the raid array? thanx

-crashtd
 
crashtd said:
Hey guys i'm an ATA/IDE newb. How do i go about setting up a parity RAID setup on a G4 Quicksilver? What do i jump my drives to? Can i run the system (10.2) on the raid array? thanx

-crashtd
Click to expand...
i know nothing about raid, but check out Disk Utility. Click on a drive, select raid, add drives to the raid array, choose your raid setting and click create. i think you need more than 2 drives? or more than 2 drives off the main drive, since i have 2 and can't create a raid setup.

like i said, i know nothing about raid, but check it out, should be easy to figure out if you do.
 
You can only do software level 0,1 (one big disk,mirrored). If you want to do level 5 you will need a RAID card. I don't know if apple sells one or not. I am sure you could find one though. You should run the OS off your built in ATA controller. Whats you budget?
 
i just need a simple parody (raid 1). I'm tight with the money but easy with the lovin' 😛 Seriously money isn't a huge deal, but i know i don't need much to get what i want done. Basically i'm just running a small server, but its 300 miles away from me, so i just want some protection if i lose a drive it'll be alright until i can drive up and swap in a new disk. I was planning to just do s/w raid off disk utility. But didn't know if i could run the system off the array, and i also don't know if both drives are master/slave or if one is slave and the other master, or if i just put them in a bag, shake'm and pop'em in the oven
 
methinks that level 1, (which is what you can get in software) is mirrored raid. So total space = 1/2 total hard drive space. Yes you can run your system of it. I have done it before. (But with raid 0) If you have cash, and you have alot of data (which it seems you don't), and you need something that isn't level 1 or 0 (most people like 5, which is the parity drive you spoke of) then the XRAID is very good. 1TB = $5000. + it is really fast, and on fibre channel. In fact its so fast i don't think a quicksilver could even take up half the bandwidth avialbe on the thing. </END SALES PITCH>

But really, software RAID is a quick fix. You can't expand it with out eraseing it. And you only get 1 and 0.

2 cents
 
You must log in or register to reply here.
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.
Top Bottom
Back