Go Back   MacRumors Forums > Archive > Archives of Old Posts > Macintosh Computers

 
 
Thread Tools Search this Thread Display Modes
Old May 26, 2004, 07:32 AM   #1
phillymjs
macrumors regular
 
Join Date: Jul 2002
Need help with almost-dead iMac DV 400

Yesterday a client gave me an iMac DV 400 that will not boot and is basically dead. Pressing the power button causes it to light up, I hear the hard drive start to spin up, and then the Mac shuts down almost immediately (before it even plays the startup chime). It seems like there's something that doesn't quite 'catch' when I try to power it up. This does not perfectly match the 'green light of death' symptoms I found when Googling.

I'd like to fix this on the cheap and perhaps give it to one of my Windows-using friends, because I'm tired of fixing his crappy PC.

Anybody seen this problem before? My educated guess is that's it's gotta be power-supply related. I'm just looking for an idea of which part(s) to replace and/or if this is something I should probably leave to a real Apple hardware technician.

TIA,

~Philly
phillymjs is offline   0
Old May 26, 2004, 07:52 AM   #2
JFreak
macrumors 68040
 
JFreak's Avatar
 
Join Date: Jul 2003
Location: Tampere, Finland
open the case and use the vacuum cleaner mat max power to suck all dirt off the power supply. it could be so dirty that it overheats. this might not be enough to have it up&running but i have so far seen two such computers that this helped.
JFreak is offline   0
Old May 26, 2004, 08:52 AM   #3
TheT
macrumors 6502
 
Join Date: Jan 2002
Location: Germany
Send a message via ICQ to TheT Send a message via AIM to TheT
Did you try to boot up from a CD (pressing "C" when starting up with the CD inside)? Maybe it's just a dead hard-drive. I know my DV 400 harddrive died 2 years ago, for no apparent reason (no, age is not a reason after 3 years)...
Also, try holding down the option (alt) key, that will hopefully show you the startup-manager... if that shows up, it's the HD / OS...
TheT is offline   0
Old May 26, 2004, 09:23 AM   #4
phillymjs
Thread Starter
macrumors regular
 
Join Date: Jul 2002
I know the hard drive is fine because I had to yank it and put it in another machine to retrieve some data.

The iMac was quite a bit dusty inside, but the computer does not stay on long enough for heat to become an issue. I plan to clean it thoroughly when I crack it open again to replace whatever part it needs.

~Philly
phillymjs is offline   0
Old May 26, 2004, 09:58 AM   #5
Spock
macrumors 68000
 
Spock's Avatar
 
Join Date: Jan 2002
Location: Vulcan
Send a message via AIM to Spock Send a message via Yahoo to Spock
I am not sure of the location, but You should also try pressing the CUDA botton on the Logicboard this may help.
Do You here the start up chime?
Spock is offline   0
Old May 26, 2004, 07:47 PM   #6
Macmaniac
macrumors 68040
 
Macmaniac's Avatar
 
Join Date: Jan 2001
Location: A tiny spec in the "Garden State", 1 square mile in area, somewhere on the outskirts of town by the railroad tracks
It sounds like your PAV board which controls the power and video on your iMac, this probably needs to be replaced, if you want turn the computer around and on the back there are two doors, one has a lock unlock key on it, above there is another door which can be popped off with a screwdriver this lets you access the VGA port on the iMac, so at least you can see if you are getting any video, although not all iMacs had this. Have the computer looked at it is probably the PAV board, but it could be the Logic board as well, have it looked at.
__________________
The customer is NOT always right
Macmaniac is offline   0
Old May 26, 2004, 09:45 PM   #7
phillymjs
Thread Starter
macrumors regular
 
Join Date: Jul 2002
Quote:
Originally Posted by Macmaniac
It sounds like your PAV board which controls the power and video on your iMac, this probably needs to be replaced.
Damn. If it was anything else, I'd do it myself, but the idea of screwing around with the power feed into the CRT does not thrill me.

You're right, I think I will take it to the Marlton Apple Store and have them repair it. Even if it's a couple hundred bucks, that's still cheaper than the going rate for this machine in working condition on eBay.

~Philly
phillymjs is offline   0
Old May 26, 2004, 10:48 PM   #8
Macky-Mac
macrumors 68020
 
Macky-Mac's Avatar
 
Join Date: May 2004
maybe a jammed power switch??

are you pushing the one on the keyboard or on the iMac? You might try the other one......you never know. I have a friend who had a similar problem with his powerbook and it turned out that the "shift" key was jammed in the down position causing all sorts of confusion
Macky-Mac is offline   0
Old May 27, 2004, 09:36 PM   #9
phillymjs
Thread Starter
macrumors regular
 
Join Date: Jul 2002
Well, I took it to the Apple Store, and the guy at the Genius Bar confirmed that it is most likely the PAV (power-analog-video) board/module/whatever. He quoted me a $300 repair cost, which really kills the buzz from getting the iMac for free.

I'm gonna try a smaller service place near me and see if they can get it done a little cheaper, but the part itself apparently costs $150-- so I probably won't get that much of a better price.

~Philly

Last edited by phillymjs; May 27, 2004 at 10:52 PM.
phillymjs is offline   0


 
MacRumors Forums > Archive > Archives of Old Posts > Macintosh Computers

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Similar Threads
thread Thread Starter Forum Replies Last Post
$400 for an iMac and iBook? RedCroissant Buying Tips and Advice 12 Sep 18, 2012 07:17 PM

Forum Jump

All times are GMT -5. The time now is 06:01 AM.

Mac Rumors | Mac | iPhone | iPhone Game Reviews | iPhone Apps

Mobile Version | Fixed | Fluid | Fluid HD
Copyright 2002-2013, MacRumors.com, LLC