My NAT portforward service to run a MAMP webserver:
Network setup:
I have setup a local static ipadress for my machine which is running a MAMP webserver. Which means i always get the following IP-adress 192.168.1.50.
MAMP works on http://192.168.1.50:8888/ but not on the portforward ipadress
http://77.XXX.XXX.220:8888/
ISP ( provides us with 5 static ips. )
77.XXX.XXX.218
77.XXX.XXX.219
77.XXX.XXX.220
77.XXX.XXX.221
77.XXX.XXX.222
The ISP is running a bridge mode from theire router too our Xserve.
Our xserve(mac os x server 10.6.2) then runs a DHCP service giving users a local IP adress aswell as internet connection.
Then we have the firewall which is basicly set to allow all traffic.
I have also tried to set advanced rules to specify it completly without any luck.
This is the plist file i have generated:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>redirect_port</key>
<array>
<dict>
<key>proto</key>
<string>tcp</string>
<key>targetIP</key>
<string>192.168.1.50</string>
<key>targetPortRange</key>
<string>80</string>
<key>aliasIP</key>
<string>77.XXX.XXX.220</string>
<key>aliasPortRange</key>
<string>8888</string>
</dict>
</array>
</dict>
</plist>
I have tried to looking in different logs without any luck at all. Can anyone please push me in the right direction on how to debug this?
My /var/log/alias.log says the following over and over with different udp, tcp, sock and tot.
icmp=0, udp=48, tcp=61 pptp=0, proto=0, frag_id=0 / tot=106 (sock1)
I have also checked "sudo ipfw list" and both port 8888 and 80 is openend from any to any.
Network setup:
I have setup a local static ipadress for my machine which is running a MAMP webserver. Which means i always get the following IP-adress 192.168.1.50.
MAMP works on http://192.168.1.50:8888/ but not on the portforward ipadress
http://77.XXX.XXX.220:8888/
ISP ( provides us with 5 static ips. )
77.XXX.XXX.218
77.XXX.XXX.219
77.XXX.XXX.220
77.XXX.XXX.221
77.XXX.XXX.222
The ISP is running a bridge mode from theire router too our Xserve.
Our xserve(mac os x server 10.6.2) then runs a DHCP service giving users a local IP adress aswell as internet connection.
Then we have the firewall which is basicly set to allow all traffic.
I have also tried to set advanced rules to specify it completly without any luck.
This is the plist file i have generated:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>redirect_port</key>
<array>
<dict>
<key>proto</key>
<string>tcp</string>
<key>targetIP</key>
<string>192.168.1.50</string>
<key>targetPortRange</key>
<string>80</string>
<key>aliasIP</key>
<string>77.XXX.XXX.220</string>
<key>aliasPortRange</key>
<string>8888</string>
</dict>
</array>
</dict>
</plist>
I have tried to looking in different logs without any luck at all. Can anyone please push me in the right direction on how to debug this?
My /var/log/alias.log says the following over and over with different udp, tcp, sock and tot.
icmp=0, udp=48, tcp=61 pptp=0, proto=0, frag_id=0 / tot=106 (sock1)
I have also checked "sudo ipfw list" and both port 8888 and 80 is openend from any to any.
