Go Back   MacRumors Forums > Archive > Archives of Old Posts > Macintosh Computers

 
 
Thread Tools Search this Thread Display Modes
Old Oct 5, 2004, 11:25 AM   #1
Wano
macrumors 6502
 
Join Date: Oct 2002
Send a message via AIM to Wano
Just installed new dvd burner drive. Eject?

Hey,
I just recieved my Pioneer DVR-108 dvd burner and I installed it in my MDD G4 in the bottom slot. My computer has recognized it, however I can't open/eject either drives.
Anyone know what to do?
Thanks!
__________________
Apple 17" Macbook Pro, Panasonic DVX100B, and Final Cut Studio.
Wano is offline   0
Old Oct 5, 2004, 11:36 AM   #2
Finiksa
macrumors 6502a
 
Finiksa's Avatar
 
Join Date: Feb 2003
Location: Australia
Quote:
Originally Posted by Wano
Anyone know what to do?
Just a wild stab in the dark, but did you make sure the jumpers on the 108 were set to "Slave"? or set the jumpers on both optical drives to "Cable Select"?
__________________
Mac mini - Core i5 2.5GHz (with Crucial M4 SSD)
iPhone 4s 16GB White
New iPad 32GB Wi-Fi White
Finiksa is offline   0
Old Oct 5, 2004, 11:49 AM   #3
Wano
Thread Starter
macrumors 6502
 
Join Date: Oct 2002
Send a message via AIM to Wano
How do I do that?
__________________
Apple 17" Macbook Pro, Panasonic DVX100B, and Final Cut Studio.
Wano is offline   0
Old Oct 5, 2004, 12:32 PM   #4
SilentPanda
Moderator emeritus
 
SilentPanda's Avatar
 
Join Date: Oct 2002
Location: The Bamboo Forest
On the back of the drive is where the jumpers are at... you'll need to look on the drive (should be a sticker somewhere) to set the jumpers or it will be in the manual. Usually...
__________________
My 24 hour web cam! ʕノᴥʔノ ︵ ┻━┻
And remember.
SilentPanda is offline   0
Old Oct 5, 2004, 01:00 PM   #5
Macmaniac
macrumors 68040
 
Macmaniac's Avatar
 
Join Date: Jan 2001
Location: A tiny spec in the "Garden State", 1 square mile in area, somewhere on the outskirts of town by the railroad tracks
After you try the Jumpers also look around in your manuel, I think there is a special command for opening the second drive.
__________________
The customer is NOT always right
Macmaniac is offline   0
Old Oct 6, 2004, 01:23 AM   #6
Wano
Thread Starter
macrumors 6502
 
Join Date: Oct 2002
Send a message via AIM to Wano
Ok, so I got it to eject! However, I found this on dealmac.com and 1. it is not mac supported, 2. it's too wide to eject through the mdd slots. so, back to newegg it goes. thanks for the help though!
__________________
Apple 17" Macbook Pro, Panasonic DVX100B, and Final Cut Studio.
Wano is offline   0
Old Oct 6, 2004, 01:38 AM   #7
paxtonandrew
macrumors 6502
 
Join Date: May 2004
Location: I Come From A Land Down Under
Send a message via MSN to paxtonandrew
What a bugger it is too wide for the MDD slots. The Mac compatibility issue is not to be taken literally. I have a Sony, Windows Xp only DVD burner in my Quicksilver, and it works perfectly. There is no issue with compatibility, it is all just hype. You got it to open in your MDD right? It works with Macintosh!
__________________
People Trust Holwoo
paxtonandrew is offline   0
Old Oct 6, 2004, 07:45 AM   #8
varmit
macrumors 68000
 
varmit's Avatar
 
Join Date: Aug 2003
Quote:
Originally Posted by paxtonandrew
What a bugger it is too wide for the MDD slots. The Mac compatibility issue is not to be taken literally. I have a Sony, Windows Xp only DVD burner in my Quicksilver, and it works perfectly. There is no issue with compatibility, it is all just hype. You got it to open in your MDD right? It works with Macintosh!
He got it to open, but it has the front part that PCs have. The mac doesn't have that front part to tray. So that was banging on stuff. You could remove it probably, but I would just return it for a different drive that is fully mac, and doesn't have the front part to the drive tray.
varmit is offline   0
Old Oct 6, 2004, 10:30 AM   #9
osprey76
macrumors 6502
 
Join Date: May 2004
Location: Vernal, UT
I think I recall a note about that on http://xlr8yourmac.com. For any optical drive in the MDD Macs you have to remove the dust bezel off the front of the drive. All Pioneer drives would ship with this on, whether you buy it from a Mac vendor or a more general one.

Edit: Look on page 8 here. You can see the front cover isn't on the tray. I have never removed one, but it should be fairly simple.

Also, isn't it option+Eject to open the second drive slot on a MDD? Of course, your jumpers would need to be set correctly. Both of the drives you have probably shipped as Master.

Last edited by osprey76; Oct 6, 2004 at 10:36 AM.
osprey76 is offline   0
Old Oct 6, 2004, 05:19 PM   #10
Wano
Thread Starter
macrumors 6502
 
Join Date: Oct 2002
Send a message via AIM to Wano
Thanks guys! I think I will be sending it back and getting a external one instead.
__________________
Apple 17" Macbook Pro, Panasonic DVX100B, and Final Cut Studio.
Wano is offline   0
Old Oct 6, 2004, 07:09 PM   #11
blodwyn
macrumors 65816
 
Join Date: Jul 2004
Location: Portland, Oregon
Quote:
Originally Posted by Wano
Thanks guys! I think I will be sending it back and getting a external one instead.
Why not just buy an external firewire enclosure and put the burner in it. I bought the same burner and put it in an enclosure - works fine.
blodwyn is offline   0
Old Oct 7, 2004, 06:35 AM   #12
Finiksa
macrumors 6502a
 
Finiksa's Avatar
 
Join Date: Feb 2003
Location: Australia
Quote:
Originally Posted by Wano
Thanks guys! I think I will be sending it back and getting a external one instead.
Don't send it back, osprey76 is right you just need to remove the dust bezel from the drive. All modern Apple systems with tray load drives (eMac, iMac G4, Power Mac) don't use them, it's very simple to unclip from the drive tray. Look at the factory installed drive in your MDD it won't have one.
__________________
Mac mini - Core i5 2.5GHz (with Crucial M4 SSD)
iPhone 4s 16GB White
New iPad 32GB Wi-Fi White
Finiksa is offline   0
Old Oct 7, 2004, 07:28 AM   #13
caveman_uk
Guest
 
caveman_uk's Avatar
 
Join Date: Feb 2003
Location: Hitchin, Herts, UK
Quote:
Originally Posted by Wano
Ok, so I got it to eject! However, I found this on dealmac.com and 1. it is not mac supported, 2. it's too wide to eject through the mdd slots. so, back to newegg it goes. thanks for the help though!
1. Very few CD-burners/DVD burners are supported by the Apple drivers. If you use the Pioneers they usually are as Apple used them themselves. You can however get most drives to work using Patchburn (google for it). It's free. Apparently PAtchburn 3 also gets the drives to work with iDVD. If you get an external drive IT WILL NOT WORK WITH iDVD.
2. Take off the door bezel. It's only clipped on. All drives shipped by Apple have this removed. All 3rd party drives expect to be fitted in PCs so will ship with the bezel in place. If you exchange this drive for another it to will have this bezel in place.

AFAIK the best DVD burner supported by Apple is the Pioneer DVR-107. This is an 8x drive but doesn't have dual layer support. You can also get Mac firmware flashers for this drive.

Last edited by caveman_uk; Oct 7, 2004 at 07:30 AM.
caveman_uk is offline   0
Old Oct 7, 2004, 07:25 PM   #14
freiheit
macrumors 6502a
 
Join Date: Jul 2004
Location: California
Drive front bezel or only drive tray bezel?

I just bought a Pioneer 108 for my MDD G4 as well. To say it's not Mac supported is way off -- it is Mac supported. Roxio Toast 6 Titanium (MacOS equivalent of the Windows Easy CD/DVD Creator) supports the 108, including DL burning support for 8.5GB disks! It also supports both the +R and -R formats on this drive. The drive is just not iLife supported.

I personally plan to keep my 105 (official Apple 4X SuperDrive) in the system for iLife and use the 108 with Toast for my data backups, system backups, etc.

So here I sit about ready to put my 108 into my PowerMac, and I'm wondering if I also need to remove the bezel on the front of the drive or just the one on the front of the drive tray. From what I can tell when I open up my Mac, the official SuperDrive doesn't have either one, but it's awfully difficult to push in all 4 clips to remove the drive front.
freiheit is offline   0
Old Oct 7, 2004, 08:11 PM   #15
Rod Rod
macrumors 68020
 
Rod Rod's Avatar
 
Join Date: Sep 2003
Location: Las Vegas, NV
freiheit, you don't need to remove all of the front plastics of the drive. the only part you need to remove is that piece of plastic that's attached on the front of the tray.

I installed a Pioneer 105 in an eMac and a Pioneer 106 in a MDD Power Mac G4. I didn't need to remove the front piece for the eMac.

for the MDD, removing the front piece on the tray was EASY... it just slid perfectly in one direction (either up or down, I don't remember, but it'll be easy to figure out if you look at it closely). there wasn't any resistance from clips. there's some initial friction but you won't feel like you're about to break the plastic.

Wano, I'll bet you a firewire cable that 10.3.6 (if and when it comes) will add support for the Pioneer 108.

just wait it out a little bit, and get by with Toast 6.0.7. as for iDVD, burn to disk image, and burn to DVD-R in Toast. there are threads in here about the iDVD easter egg.

at the moment I can burn to my self-installed external firewire Pioneer 107 from iDVD.
__________________
the year of HD

Last edited by Rod Rod; Oct 7, 2004 at 08:15 PM.
Rod Rod is offline   0
Old Oct 7, 2004, 09:12 PM   #16
Wano
Thread Starter
macrumors 6502
 
Join Date: Oct 2002
Send a message via AIM to Wano
Ok. So, I am not quiet sure how this works. But, I installed the drive and it showed up under 'about this mac' but it says that it's not supported. I inserted a blank dvd and then i got a message saying that the drive is not supported. So.........you guys think it will still work like you guys have mentioned?
__________________
Apple 17" Macbook Pro, Panasonic DVX100B, and Final Cut Studio.
Wano is offline   0
Old Oct 7, 2004, 11:26 PM   #17
Rod Rod
macrumors 68020
 
Rod Rod's Avatar
 
Join Date: Sep 2003
Location: Las Vegas, NV
yes sir, just get Toast or Dragon Burn for your disc burning needs. Finder burning is nice, but Toast is a very full-featured program that might as well be bundled with every Mac.
__________________
the year of HD
Rod Rod is offline   0
Old Oct 8, 2004, 12:06 AM   #18
Wano
Thread Starter
macrumors 6502
 
Join Date: Oct 2002
Send a message via AIM to Wano
Good news!!!! I installed it, in the place of the combo drive. I was able to remove the dust thing and it now fits through. I downloaded Patchburn 3 and it works perfect!!!!!!

Just one more question. How do i install it along with my combo drive? I don't understand the jumper settings.
__________________
Apple 17" Macbook Pro, Panasonic DVX100B, and Final Cut Studio.
Wano is offline   0
Old Oct 8, 2004, 02:55 AM   #19
Finiksa
macrumors 6502a
 
Finiksa's Avatar
 
Join Date: Feb 2003
Location: Australia
Quote:
Originally Posted by Wano
Just one more question. How do i install it along with my combo drive? I don't understand the jumper settings.
Look at the label on the drives it should have a picture showing the jumpers pins and have them labeled, it's usually two rows of three pins (though there maybe a couple of pins that do nothing). Your options will be Master, Slave and Cable Select, then all you have to do is place the plastic jumper cap so that it connects the two corresponding pins. So for Master place the jumper cap across the two pins indicated in red on the attached picture.

The drive in the top bay, attached to the end of the ribbon cable, should be set to Master. The drive in the bottom bay which is attached to the middle of the ribbon cable should be set to Slave. You could also set both to Cable Select and they'll sort out which is Slave and Master themselves, this sometimes doesn't work for all computers though.

Lastly it's probably a good idea to put the DVD burner in the top bay (Master) since it get bandwidth priority over the Slave device.
Attached Thumbnails
Click image for larger version

Name:	jumper.jpg
Views:	28
Size:	34.0 KB
ID:	17914  
__________________
Mac mini - Core i5 2.5GHz (with Crucial M4 SSD)
iPhone 4s 16GB White
New iPad 32GB Wi-Fi White
Finiksa is offline   0
Old Oct 8, 2004, 05:02 AM   #20
caveman_uk
Guest
 
caveman_uk's Avatar
 
Join Date: Feb 2003
Location: Hitchin, Herts, UK
Quote:
Originally Posted by freiheit
I just bought a Pioneer 108 for my MDD G4 as well. To say it's not Mac supported is way off -- it is Mac supported.
That's rather different. Toast uses it's own drivers and many drives that Apple does not support will work with toast. If you want to use your drive with finder and the iLife suite then either get a drive Apple supports (the most full featured being the Pioneer DVD-107 which is used in the PM G5 and the emac) OR use Patchburn which, as Wano has found out, will make nearly any drive work.
caveman_uk is offline   0
Old Oct 22, 2004, 02:04 PM   #21
DVDwannabe
macrumors newbie
 
Join Date: Oct 2003
Location: Indiana
Pioneer DVR-108 Firmware for Mac

So I was looking for the newest firmware for my 108 drive. Windows has 1.14, but I am stuck with 1.01 or something like that. Its at home and i can't remember, but anywho, can anyone point me in the right direction to a site that I can download the newest firmware for the mac?

Dvdwannabe
__________________
G4 1G DP
512 DDRAM
Superdrive + DVD-ROM/CD-RW
OS10
DVDwannabe is offline   0
Old Oct 22, 2004, 04:25 PM   #22
caveman_uk
Guest
 
caveman_uk's Avatar
 
Join Date: Feb 2003
Location: Hitchin, Herts, UK
This link is for a reputed flasher for DVR-108 drives in macs. I've never used it though as I don't have that drive. For the DVR-107 and below this flasher does work - I've used it myself.
caveman_uk is offline   0


 
MacRumors Forums > Archive > Archives of Old Posts > Macintosh Computers

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Similar Threads
thread Thread Starter Forum Replies Last Post
cd/dvd burner robo44 iMac 2 Nov 21, 2013 11:31 AM
Can't eject disk from external CD/DVD Drive on Mac Mini with ML msarro Mac mini 1 May 10, 2013 05:07 PM
Installed Windows 8 in BC, no DVD drive detected... TheGreenBastard Windows, Linux & Others on the Mac 2 May 1, 2013 03:26 PM
For those searching for an external optical drive - good deal on DVD burner/BL reader poloponies Mac mini 0 Feb 20, 2013 01:31 PM
Can I assign the "eject" key to eject my External DVD drive? bobright iMac 4 Dec 29, 2012 06:41 PM

Forum Jump

All times are GMT -5. The time now is 10:38 AM.

Mac Rumors | Mac | iPhone | iPhone Game Reviews | iPhone Apps

Mobile Version | Fixed | Fluid | Fluid HD
Copyright 2002-2013, MacRumors.com, LLC