10.3.8 prob- resolutions on 16:9 DVI projector

Discussion in 'General Mac Discussion' started by hal0n, Feb 19, 2005.

  1. hal0n macrumors regular

    Joined:
    Dec 27, 2004
    #1
    Well, until 10.3.8 I was enjoying using my (girlfriends) 15"pb (1.5ghz) as my home theater source. Really it is the only source I have since I am living in Taiwan now... Pre-10.3.8 I had a nice list of possible resolutions for my projector. Although, sadly it never had the native resolution. At least I had some 16:9 options like 1280x768. After the update it only lists 640x480, 800x600, and 1024x768. It still detects the projector and pulls up the model number but doesn't give me the options for the screen ratio.

    Does anyone know where I should start to track down this problem? Is it possible to manually set resolutions... I know both the gpu and the display support it, so if there is a way I would have no hesitation to fix this thing.

    I wish I had brought the DVI connector for my 12" 1.33ghz pbook, but I didn't think I would need it. I wish I could see if it would work with mine... =\

    Kevin
     
  2. hal0n thread starter macrumors regular

    Joined:
    Dec 27, 2004
  3. JFreak macrumors 68040

    JFreak

    Joined:
    Jul 11, 2003
    Location:
    Tampere, Finland
    #3
    i use switchresX that enables 1280x720 resolution that i can use with my projector. i strongly recommend that app, as those custom resolutions might never be officially supported by apple.
     
  4. the future macrumors 6502a

    Joined:
    Jul 17, 2002
    #4
  5. hal0n thread starter macrumors regular

    Joined:
    Dec 27, 2004
    #5
    I am going to give switchres a go... i'll report if it works out or not.

    thanks!

    k
     

Share This Page