Best Combo Invisible Shield+Apple Bumper :)

Discussion in 'iPhone Accessories' started by kaizer85, Jul 30, 2010.

  1. macrumors member

    Joined:
    Jun 20, 2010
    Location:
    Boynton Beach, FL
    #1
    both sides front and back zagg Invisible Shield plus the apple bumper. It feels better IMO & Of Course looks Niiiice :)
     
  2. macrumors 6502

    Joined:
    Sep 20, 2007
    #2
    I have the same setup. Not sold on it on the front. It has an almost tacky feel which works great on the back but on the front makes it tougher to slide my finger across the display. Giving it a couple more weeks before I decide whether to pull it off the front.

     
  3. macrumors member

    Joined:
    Apr 8, 2010
    Location:
    San Francisco
    #3
    I love my phantom skinz and bumper combo! except that so many non apple plugs cant fit with the bumper on. my car charger, the car ipod adapter, etc. its a bit frustrating, but i do still like this combo a lot
     
  4. macrumors regular

    Joined:
    Mar 3, 2008
    #4
    I haven't tried the front one, since I had bought a case that came with a front screen protector and it surprisingly works great and is unnoticeable. I noticed that the back has like an orange peel effect, so that's another reason why I haven't used the front one. Does it affect the phone's display at all?
     
  5. macrumors regular

    uanuglyfool

    Joined:
    Mar 8, 2009
    Location:
    The Moon, CA
    #5
    Take it off dude. I use to have it on for my old iPhones until the 3GS got that o screen. It feels completely different on the fingers. Your doing your phone a injustice lol
     
  6. macrumors 6502

    Joined:
    Jun 21, 2010
    #6
    Hell I went even further. I took my bumper off and the front IS. I only left the back IS on to protect it when I set it down.
     
  7. macrumors 6502a

    sheppy1

    Joined:
    Sep 8, 2008
    #7
    That's pretty much how I gave mine too except I have a BSE instead of an IS, have it on Back, Front and Sides, only problem is, is that the bumper has started to make the corners of the screen protector bubble up a little bit (I mustn't have put it on straight) :(
     
  8. macrumors regular

    Joined:
    Jun 20, 2009
    #8
    Same here, I tried using a credit card to get rid of the bubbles but it comes back after a while but its only noticeable at the bottom of the back.
     
  9. macrumors 65816

    TroyBoy30

    Joined:
    Jun 9, 2009
    Location:
    Atlanta GA
    #9
    power support and bumper
     
  10. macrumors regular

    Peruvian

    Joined:
    Jun 10, 2006
    Location:
    U.K.
    #10
    Maaan, I butchered my invishield, trying to put the bumper on... In the end I removed the front shield and left the back on... but even now, the back is starting to peel on the edges....
     
  11. macrumors 65816

    Joined:
    Dec 8, 2005
    #11
    We put Invisible Shield on both our iPhone 4s as well as bumpers, but on both of them, the edges keep peeling up, front and back, in different places. Spoke to Zagg and they say we obviously installed them wrong, but we've been using their products for years so know how to install them. Not sure what to do now tbh.
     
  12. macrumors newbie

    Joined:
    Jul 26, 2009
    #12
    This is the one I am going to do with my iphone4:D
    Is the power support for Iphone4 available yet?
     
  13. macrumors demi-god

    Joined:
    Apr 20, 2009
    Location:
    NY
    #13
    I messed up my IS too when the bumper was added. Now I trim all the sides so the bumper doesn't touch it. With a paper cutter I just take a bit off each side before I even attempt to put it on. Problem solved. :D
     
  14. macrumors newbie

    Joined:
    Jul 8, 2008
    #14
    Just curious

    I have a Marware bumper with screen protectors on front and back. I'd like to take the bumper off but worry about scratching the lens on the back when I set the phone down.
     
  15. macrumors member

    Prelude2elude

    Joined:
    Jun 17, 2010
    #15
    I agree, i think this is the best combo for me. It took some getting used to the way the IS feels, but it gives you some grip because that glass can be slippery.

    I wish apple released a clear bumper though.
     
  16. macrumors regular

    Joined:
    Sep 18, 2007
    #16
    You need to let the Invisible Shield cure for at least 3-4 days before you try putting the bumper on. Otherwise, it will peel up...

    Y2J
     
  17. macrumors 65816

    chakraj

    Joined:
    Feb 6, 2008
    Location:
    So Cal
    #17
    I have the full body IS including the sideas and I only let it dry an hour or so before puting my white bumper back on, no problems here, and the sides make the bumper tight :)
     
  18. macrumors 65816

    TroyBoy30

    Joined:
    Jun 9, 2009
    Location:
    Atlanta GA
    #18
  19. macrumors 604

    mcdj

    Joined:
    Jul 10, 2007
    Location:
    NYC
    #19
    Wirelessly posted (iPhone: Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_0 like Mac OS X; en-us) AppleWebKit/532.9 (KHTML, like Gecko) Version/4.0.5 Mobile/8A293 Safari/6531.22.7)

    Why can't anyone seem to see the accessories forum at the top of this page??
     

Share This Page