Cube: heatsink or fan with CPU upgrade?

Discussion in 'PowerPC Macs' started by California, Nov 7, 2012.

  1. macrumors 68040

    California

    Joined:
    Aug 21, 2004
    #1
    Guys have any of you done a Cube CPU upgrade with a Sonnet CPU?

    If so, does the Cube use the heatsink or a flat fan?
     
  2. macrumors P6

    Intell

    Joined:
    Jan 24, 2010
    Location:
    Inside
  3. macrumors regular

    Joined:
    Jul 6, 2010
    Location:
    WI
    #3
    You're going to need a fan with any CPU upgrade. There's lots of info on Cube cpu upgrades at www.cubeowner.com
     
  4. macrumors 6502

    Joined:
    Sep 10, 2010
    Location:
    Ontario
    #4
    I did a Gigadesign installation a few years ago, and I completely second what AtmChm says. Fortunately, the Cube does have a space ready and a power connector, as Apple dithered in the design stages about whether there should be a fan.
     
  5. macrumors 68000

    Joined:
    Jan 1, 2010
    #5
    There is a report on xlr8yourmac with pictures.
     
  6. thread starter macrumors 68040

    California

    Joined:
    Aug 21, 2004
    #6
    Thanks guys

    I think I need to get a new fan for the Cube, my BF (yes I'm a girl...!) lost the Cube stuff and the box.

    Do any of you guys have a fan or recommendations of how to get one? Thank you so much.
     
  7. macrumors regular

    Joined:
    Jul 6, 2010
    Location:
    WI
    #7
    You can go for one of two sizes: a 15 mm fan will easily fit in the space provided for a fan in the cube, but they generally push less air and/or are more noisy since they have to operate at a higher rpm to move the same amount of air as a larger fan. A 25 mm fan will be a tight fit, but generally will be less noisy.

    I put the Noctua NF-R8 in two of my Cubes. It's a 25 mm fan and actually has three speed settings controlled via resistors provided with the fan. I run mine at the middle setting, which moves enough air to keep the cube cool, while minimizing the noise produced by the fan. The fan is available at Amazon:

    http://www.amazon.com/Noctua-NF-R8-...e=UTF8&qid=1352463261&sr=8-10&keywords=noctua

    and likely can easily be found at other vendors. For a 15 mm fan, the Panaflow is generally thought to be the best (I have one in a third cube) - quiet and run well, but they are no longer made, so you'd have to look around for a used one. There are lots of other 15 mm fans with varying degrees of reliability.

    The other trick here is you will need to power the fan. Most fans will not come with the correct power connector required for the power jack on the VRM. However, most will come with a 4 pin adapter to connect the fan to the CD/DVD molex.

    Again, I'd recommend searching the cubeowner website, which has lots of info on fans for the cube.
     
  8. thread starter macrumors 68040

    California

    Joined:
    Aug 21, 2004
    #8
    Thanks, Sonnet actually wrote back and said to get their cube fan kit, and asked me specifically if I had a Cube for Sonnet upgrade, which it is. It's the Panaflow fan, right, that comes with the Sonnet CPU upgrade?
     
  9. macrumors regular

    Joined:
    Jul 6, 2010
    Location:
    WI
    #9
    My understanding is that the Panaflow came with the Sonnet upgrade once upon a time, but I don't think the Panaflow has been made for a few years, so I'm not sure what they are including in their kits now. Are they still selling Cube upgrade kits or are you looking at buying a used one?
     
  10. thread starter macrumors 68040

    California

    Joined:
    Aug 21, 2004
    #10
    They have the kit for 29.95. Emailed me today.
     
  11. macrumors regular

    Joined:
    Jul 6, 2010
    Location:
    WI
    #11
    Well, that's likely your best option. That fan should have the correct connector for the fan power connector apple included on the VRM. Good luck on your upgrade! The Cube is such a cool Mac, and installing an upgrade makes it more enjoyable to use.
     
  12. macrumors 68000

    Joined:
    Jan 1, 2010
    #12
    @ California

    Why not ask Sonnet, if they can tell you what exact fan model they use. On the PowerMac G4 towers they used Sunon fans, which are quiet loud (though they said, they took the quietest available at the time...)

    If you have the exact model number of the Sonnet fan, you can search for the specs and compare with other fans.
     

Share This Page