Expand existing network (non-apple) with Airport Express

Discussion in 'Mac OS X Server, Xserve, and Networking' started by dannyken, Aug 1, 2010.

  1. macrumors newbie

    Joined:
    Aug 1, 2009
    #1
    Hello everyone,

    I would like to expand our existing network with an Airport Express.
    It is a D-Link wireless router and standard modem in a neighboring building, but they don't always give enough signal in the living room. There is however an internet cable from the building of the router to a room near the living room (cable not currently in use).

    I would like to know if an Airport Express can connect to the network via that cable and then can boost the signal?
    And will work wireless music streaming work via the Express?

    (I read something about using the Airport Express as a bridge, but it wasn't very clear to me.)

    Thanks!

    Daniel
     
  2. macrumors 65816

    Darwin

    Joined:
    Jun 2, 2003
    Location:
    round the corner
    #2
    Setting up the Express as a bridge seems like the best choice here.

    Basically a bridge would mean that the Express bridges that network connection into wireless. It also means that the express won't try and manage the network itself leaving the D-link router in charge and allowing all computers to work together as they would on the same wired or wireless network.

    Wireless audio streaming for the Express should function correctly as well.
     
  3. thread starter macrumors newbie

    Joined:
    Aug 1, 2009
    #3
    Ok, thank you!
     

Share This Page