Found a REALLY right SSD for rev.b/c. Is it a dead-end?

Discussion in 'MacBook Air' started by Ilzen&Mac, Aug 6, 2009.

  1. macrumors newbie

    Ilzen&Mac

    Joined:
    Aug 4, 2009
    Location:
    Moscow, Russia
    #1
    After finding out that there would be some problems with uncommon SATA in latest Air's revisions I've been looking for the SSD drives that would not only accept my demands (at least 128Gb and up to 256) but would also work with the last two revisions (not only 1,8", 5mm thick but also SATA-LIF).

    After searching a little in a web the best thing I found was the 128Gb drive with better performing than the factory-assembled Samsung's one. Actually here's it: http://www.runcore.com/content/prod...mages/RCP-IV-LA1800-Cth.jpg&GBSize=32GB-128GB .

    And now I wonder if these drives are the best drives we will ever be able to put in 2nd and 3rd editions just because of the damn SATA-LIF requirements or there's a chance that there'll ever be a larger, and probably a cheaper one???:confused:
     
  2. macrumors 6502a

    Joined:
    Jul 27, 2004
    #2
    The numbers are better, particularly the random 4K writes which are the best gauge, but all in all you wouldn't notice much of a difference with it. At least not in day to day use.

    I'd rather find some way to mod the Air to use SATA or the new Intel X-18M to use LIF via some adapter since the Intel drive is cheaper, has higher capacity, and would blow that drive out of the water.

    Otherwise the gain just isn't worth the third party drive in my opinion.
     
  3. macrumors 601

    Scottsdale

    Joined:
    Sep 19, 2008
    Location:
    U.S.A.
    #3
    There's a thread that explains how to solder the LIF cable in the MBA to a SATA connector. Then plug that into drive. The thread is in MBA section and mentions micro-SATA conversion in title.

    Also, I would just take pin arrangement labels from that thread along with the MBA standard cable and a SATA drive connector cable to a custom cable maker. I have had custom cables or prototypes made for less than $50.

    Personally, I am happy with SSD in my MBA. But would consider if I could install a 256 GB SSD.
    Good luck.
     
  4. macrumors 6502a

    Joined:
    Jul 27, 2004
    #4
    Awesome, I'll take a look at it. Imagine a Gen2 X-18M in there. *Droooool*

    Hell that may be worth doing depending on the new X-18M prices. The random 4K writes on the new Gen 2's are insanely fast.
     
  5. macrumors 6502

    Joined:
    Jul 13, 2007
    #5
    Thanks for finding this!

    Finally I can upgrade my Old school Hard Drive :)
     
  6. macrumors 6502a

    mhnajjar

    Joined:
    Mar 3, 2008
    #6
    There is no need to do any additional work like soldering or anything else with this one.

    "The upgrade package includes a High Speed USB 2.0 HDD case and cables to clone your existing drive and turn it into an external USB drive, Carbon Copy Cloner Software, a screwdriver, stickers, and any additional specific cables necessary for installation."

    I can't wait for the prices to drop :D
     
  7. macrumors 6502

    Joined:
    Mar 22, 2009
    Location:
    Rockville (Despite REM's plea.)
    #7
    This is truly good news. Hopefully, other drive vendors will start cranking out SATA-LIF drives.
     
  8. macrumors 601

    Scottsdale

    Joined:
    Sep 19, 2008
    Location:
    U.S.A.
    #8
    What are you talking about? Are you implying that you found a 1.8" 5mm height SATA-II SSD with an LIF connector? Very highly doubt that!
     
  9. macrumors 6502a

    mhnajjar

    Joined:
    Mar 3, 2008
    #9
    That is the Runcore linked by the OP. It is coming soon and they would supply the required LIF connector according to what I quoted from there website.
     
  10. macrumors 6502a

    Joined:
    Jul 27, 2004
    #10
    Yea but why? The performance increase in that one over the SSD that's already in it would be marginal at best, at least to the average user. Modding it to accept standard SATA is where it's at. This LIF connector crap is garbage.

    The X-18M is 5mm and the Gen2's blow every other 1.8" drive out of the water.
     
  11. thread starter macrumors newbie

    Ilzen&Mac

    Joined:
    Aug 4, 2009
    Location:
    Moscow, Russia
    #11
    Well, actually this model is a way out for those who have hd-version of the air, as it's very hard to find a stock samsung's one. And those who don't feel comfortable soldering a thing they bought for 1200$$$ as least
     
  12. macrumors 6502a

    Joined:
    Jul 27, 2004
    #12
    Oh well yea if they bought one with a HD then it's a great option.

    Still don't understood why people bought them with HDs though and didn't just wait for price drops.... :rolleyes:
     
  13. macrumors 6502a

    mhnajjar

    Joined:
    Mar 3, 2008
    #13
    I got the HD over the SSD because I got the RARE 9C8F screen and I have no need for an SSD since my 3.06 iMac is doing the hard work.

    This is better than the stock SSD and cheaper. In addition, you can get it in larger capacity that what Apple is offering.

    :D
     
  14. macrumors 6502a

    Joined:
    Jul 27, 2004
    #14
    True, but if you're going to bother upgrading to third party SSD, I'd rather do the SATA mod and stuff in an X18-M 160GB Gen 2 in there. Same price, larger capacity, and blows whatever other pissant third party drive out of the water.
     
  15. macrumors 68020

    MacModMachine

    Joined:
    Apr 3, 2009
    Location:
    Canada
    #15
    if you read the link he posted...you wouldent ask that :p

    looks to me to be a perfect fit....

    im ordering one today

    here is a great video on the unit also....
    http://www.netbooknews.com/715/runcore-ssd-vs-sony-vaio-p-ssd-vs-vaio-p-hdd/
     
  16. macrumors 6502

    Joined:
    Mar 22, 2009
    Location:
    Rockville (Despite REM's plea.)
    #16
  17. macrumors 601

    Scottsdale

    Joined:
    Sep 19, 2008
    Location:
    U.S.A.
    #17
    I would love to hear from someone who actually gets one. I am still willing to bet the seller read the SATA-II drive specs of the rev B/C MBA and assumes the same size drive will fit in the MBA... not understanding the LIF connector.

    However, I would love to see that the cable conversion now exists. That's the hangup, a cable that runs from the LIF connector in the MBA to a standard SATA-II connection which would allow any drive that is 1.8" with 5mm height clearance dimensions to fit in the MBA.

    Could be really great news... if so, where do we get this cable?
     

Share This Page