FS: B&W G3 Motherboard, Ram & misc parts

Discussion in 'Marketplace Archive 2' started by SmurfBoxMasta, Dec 31, 2005.

  1. macrumors 65816

    SmurfBoxMasta

    #1
    Things left from parting out my trusty ole smurfbox:

    See mobo here: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=8745302484&rd=1&sspagename=STRK:MESE:IT&rd=1

    Also have the following: Photos available up request, either at imageshack or email....

    B) 2 port Firewire module from the above mobo.
    Price: $12 shipped/paypal

    C) Hitachi 8X DVD Rom/CD Rom and Zip 100 internal drives, also from a B&W G3. S O L D !

    Price: $12.00 DVD/CD, $10.00 Zip or $16.00 shipped/paypal for both

    D) ATA cables: 1x - 42" & 1x 7" long, both have 2 HD connectors. The 42" is the one that runs from the mobo under the HD trays, up the backside of the case to the optical/zip drives. The short one connects directly to the mobo and the 2 drives installed on the stacked sled that came in the Rev 2 B&W's

    Price: $9.00 shipped/paypal for both

    E) Hard drive mounting sled. No, not the stacked one :) just a flat one for 1 HD. Price: $3.00 shipped/paypal

    F) 20pin ribbon cable, connects mobo to front power/reset button panel.
    Price $2.00 shipped/paypal

    I have alot of other misc. parts & pieces from various computers laying around, let me know what you need, I may have it :D please PM me if interested.

    Thanks!
     
  2. thread starter macrumors 65816

    SmurfBoxMasta

    #2
    ram & modem are S O L D !

    everything else still available :)
     
  3. macrumors 604

    LimeiBook86

    Joined:
    May 4, 2002
    Location:
    Hanging around in NJ with his cutie. :)
    #3
    Do you have the PCI Video card from this G3? I'd be very interested in it if you still have it. :)
     
  4. thread starter macrumors 65816

    SmurfBoxMasta

    #4
    Nope, I had a Radeon 9200 in it, and it sold within hours of listing it on ebay:)
    still have everything else listed above though....
     
  5. macrumors newbie

    Joined:
    Dec 2, 2005
  6. macrumors 6502a

    Joined:
    Apr 30, 2005
    #6
    I recieved my modded B&W case from SmurfBoxMasta yesterday. It was packaged great and arrived in fine condition. Only thing is, only one of the Apple logos on one side was painted. Same with the screws. I have a half-modded B&W case now. SmurfBoxMasta failed to say this, and only provided a picture of one side. I would like to get some money back, $45 for a half-modded case is ________.
     
  7. thread starter macrumors 65816

    SmurfBoxMasta

    #7
    The description I used clearly stated the facts.......

    AND FYI, it cost well over $45 to ship :)

    If you wish to further the paint job, you could go to your local home center & get a $3.00 bottle of porcelain repair enamel. Thats what I used on both the screws & the Logo. OR, if you are like most people with B&W's and keep the side with the pull down door facing the work area, you could just swap the screws & logs around to the other side.

    Either solution should take you approximately 5 minutes :)

    Therefore, as far as I am concerned, this conversation is over.........
     
  8. macrumors 6502a

    Joined:
    Apr 30, 2005
    #8
    Sorry guess I missed that. I highly highly doubt it cost over $45 to ship, or you really sent it the wrong service. Thanks anyway, and I'll find a way to make this work.
     

Share This Page