G3 900mhz iBook HDD upgrade gone bad... HELP!

Discussion in 'Macintosh Computers' started by agentdavo, Jan 26, 2005.

  1. macrumors newbie

    Joined:
    Oct 20, 2004
    #1
    Good evening all!

    Right, i have a problem. I've just upgraded the hdd in my ibook 900mhz.... when i first turned on there were 3 beeps indicating bad memory. After turning on again, there are now four indicating bad rom?

    Have i totally friend my logic board? Or is there something "simple" that can be done to fix it?

    Any support would be much appreciated,

    Best wishes,

    David.
     
  2. macrumors 6502a

    greenmeanie

    Joined:
    Jan 22, 2005
    Location:
    CT
    #2
    hd

    i would assume you tried the old HD again?
     
  3. macrumors 603

    Mechcozmo

    Joined:
    Jul 17, 2004
    #3
    IIRC, iBooks are very hard to upgrade. You might have broken something important. Fried it, not pushed in all the way, I'm not sure.
     
  4. macrumors regular

    Joined:
    Jan 26, 2004
    #4
    Remove the battery and any 3rd party memory and leave unplugged for an hour, then try again.

    Take it apart again and try powering it up with the ATA bus unplugged. Best way to start it up without it's plastics on is to lie it on its screen with the logic board area sticking up. Remember to make sure the airport aerial is not contacting the logic board before inserting a screw driver into the powerbutton plug (top left of the logic board) to switch it on.
     
  5. thread starter macrumors newbie

    Joined:
    Oct 20, 2004
    #5
    Thanks for the fast responses.

    With hard drive and third party memory removed...

    - tried the old hard drive. Same four flashes/beeps.

    - tried with the logic board up vertical, same problem. And also removed the ata cable, same problem.

    - been trying the command+option+p+r thing to reset the PRAM, but dont get a restart or second chime like apple tech suggest... "Hold the keys down until the computer restarts and you hear the startup sound for the second time"

    Thanks for the help so far, it's greatly appreciated. What can be done to reflash a bad rom? If that is the case?

    Best wishes.

    David.
     

Share This Page