Help--There's a screw in my Powerbook that WON'T stay screwed in!

Discussion in 'Macintosh Computers' started by MattG, May 20, 2004.

  1. macrumors 68040

    MattG

    Joined:
    May 27, 2003
    Location:
    Fletcher, NC
    #1
    Well, what can I do? There's a screw in the battery compartment of my Powerbook that keeps coming unscrewed, and it's actually one of the screws that holds down the palm-rest area (I can tell when the screw has become loose again because I see the gap between the plastic binding and the metal under-part of the computer). Is there something I can use to make this thing stay screwed in?
     
  2. macrumors 603

    aswitcher

    Joined:
    Oct 8, 2003
    Location:
    Canberra OZ
    #2

    Well I dont know. It doesn't sound too bad...that is you dont appeared to be screwed :p
     
  3. macrumors G3

    Joined:
    Mar 9, 2002
    #3
    If the screw is tightening and then coming loose then go to your local hobby store and buy a tube of Tamiya Liquid Threadlock, apply a small amount of this to the thread of the screw, tighten up and leave it for a couple of hours. And that should do the trick ;). Threadlock is similar to a weak glue that will stop the screw from working it's way loose, but won't affect you undoing the screw if you ever need to.

    If however the screw never full tightens then the screw thread is probably damaged, so you'll need to get a replacement from Apple.
     
  4. thread starter macrumors 68040

    MattG

    Joined:
    May 27, 2003
    Location:
    Fletcher, NC
    #4
    Thanks!
    The screw isn't stripped, it just keeps coming loose--from the heat maybe?

    I'll pick some of this up.
     
  5. macrumors 6502a

    poopyhead

    Joined:
    Jan 4, 2004
    Location:
    in the toe-jam of greatness (Fort Worth)
    #5
    after I dropped my ibook and broke the logic board (which apple fixed for free :D) I had a similar problem
    I used threadlock and have had no problems for over a year
     
  6. thread starter macrumors 68040

    MattG

    Joined:
    May 27, 2003
    Location:
    Fletcher, NC
    #6
    Yeah, I'm thinking something similar happened to me. I had to send this computer back twice for white spots on the screen, and I'm thinking Apple just didn't bother to re-threadlock the screws when they were done.
     
  7. macrumors G3

    Joined:
    Mar 9, 2002
    #7
    the heat might have something to do with it I guess... expanding and shrinking.. but that probably has a minimal impact. It's more likely that just general useage, moving it around and gentle vibrations is causing it to come loose.

    I recommended the Tamiya Liquid Threadlock as it's formulated for RC Car use, so it's easy on plastic, so it won't cause any damage should it come into contact with anything. But any similar kind of brand will do the job.

    I hope it sorts it though! :)
     

Share This Page