iPhone Dock gives "This accessory is not made to work with iPhone" error

Discussion in 'iPhone Tips, Help and Troubleshooting' started by Thanatoast, Sep 5, 2007.

  1. macrumors 6502a

    Thanatoast

    Joined:
    Dec 3, 2002
    Location:
    Denver
    #1
    Except that the aformentioned accessory is the iPhone dock and it's plugged into my computer. My iPhone sync'd okay, but it's still an annoying problem. Anyone else getting this strange error?
     
  2. macrumors G4

    Teh Don Ditty

    Joined:
    Jan 15, 2007
    Location:
    Maryland
    #2
    I had that problem when I used the ac adapter with my dock. I took it the genius bar (where they couldn't reproduce it, but I had pictures of it just in case). They replaced the AC adapter, cable and dock for me on the spot.
     
  3. macrumors regular

    Joined:
    Jul 1, 2007
    #3
    Has anything that sends that message actually not worked, though? My ipod2car works perfectly well with the iphone, just gives the message. A guy I work with got the message from a Apple USB cable, while plugged into his computer. I didn't realize that there was a difference between the cables, as none of mine do that.

    -jt2
     
  4. macrumors newbie

    Joined:
    Nov 26, 2007
    #4
    Clean your doc and cord

    This problem happened to me. Finally found on a Apple forum that lint can build up on the connector, dock, or cable and cause this error to pop up all time. Try cleaning the connector using keyboard air spray or was the cable and connector pieces. That should do the trick.
     
  5. thread starter macrumors 6502a

    Thanatoast

    Joined:
    Dec 3, 2002
    Location:
    Denver
    #5
    Thanks for the responses :)
     
  6. macrumors regular

    Joined:
    Nov 10, 2006
    Location:
    Macclesfield/Salford England
    #6
    ive had the message once with an iPhone dock, i just took iPhone out and put it back in and everything seems okay again now. was thinking how the hell does an iPhone dock not work with an iPhone!:confused:
     
  7. macrumors newbie

    Joined:
    Feb 21, 2007
    #7
    My experiences

    I had the same problem. It was an actual problem for me, though, because if the iPhone doesn't recognize that it's in a genuine iPhone Bluetooth Headset Dual Dock, then the headset won't charge or sync (the iPhone manages the headset's connection when they share the same dock). I spent about five minutes with a needle cleaning out the dock and the dock connector. I also blew on them a lot. Problem solved. I would assume if certain pins aren't making contact, the iPhone's not sure what it's plugged into—but as long as the two or three pins carrying the power supply make contact, it will still charge correctly.

    So, in short, just clean it a little. It wasn't too bad.
     
  8. macrumors G4

    Teh Don Ditty

    Joined:
    Jan 15, 2007
    Location:
    Maryland
    #8
    Holy thread resurrection Batman!
     
  9. macrumors 604

    SFStateStudent

    Joined:
    Aug 28, 2007
    Location:
    San Francisco California, USA
    #9
    Yep, same messages on this end...

    for my car charger and car conversion thingy, as well as the BT & iPhone duel charger at the residence. And a shot of (Gas Duster) or air in a can, is the sure cure. :cool:
     
  10. macrumors 68020

    mainstreetmark

    Joined:
    May 7, 2003
    Location:
    Saint Augustine, FL
    #10
    Oh yeah? Mine does it randomly. Throughout the day. With nothing connected.
     
  11. macrumors regular

    josielinnea

    Joined:
    Dec 15, 2007
    Location:
    Stockholm
    #11
    Mine too. It's the most annoying piece of crap-message... does yours also turn off the "speaker" sounds when the message appears? IE ipod-music will stop but it will still ring if someone calls you.
     
  12. macrumors member

    Joined:
    Nov 22, 2007
    Location:
    Sunderland, UK
    #12
    Mine seems to stop syncing or charging and is followed by the "usb device not recognised" in windows.

    Have given it a blast of compressed air and a rather large chunk of fluff just flew out!!
     
  13. macrumors 68020

    mainstreetmark

    Joined:
    May 7, 2003
    Location:
    Saint Augustine, FL
    #13
    Yep. That's the one. And sometimes, when someone does call - no sound comes out of the phone's ear speaker.

    I'd take it back to Apple, but THIS is a replacement I just got 1.5 weeks ago. I think it has some funk in the dock connector.
     
  14. macrumors newbie

    Joined:
    Apr 30, 2008
    #14
    Exactly the same as me, I'm gonna have to claim it on my home insurance because i have no warrenty as its unlocked. :eek:
     
  15. macrumors regular

    Joined:
    Feb 11, 2005
    Location:
    Phoenix, AZ
    #15
    Me, too (no "speaker" sound as well). This message keeps popping up with NOTHING connected (just started yesterday). My phone is NOT jailbroken and is 100% standard. I tried blowing the dust off the connectors on the bottom and out of the headphone jack – no luck. However, the phone operates normally otherwise, and since I am buying a 3G on the 11th...
     
  16. macrumors newbie

    Joined:
    Aug 5, 2008
    #16


    Yep all sounds too similar to the problems i'm having.

    So should I persist with the cleaning or send it back for warranty repair?

    Anyone else having problems with a delay on the unlock/answer calls slider at the bottom? Not sure if this problem is related but my unlock slider doesn't always want to move, sometimes for a few seconds.

    I have also noticed that my iphone does not like to stay turned off. Would this be because of dirt on the connection pins?
     
  17. macrumors newbie

    Joined:
    Aug 5, 2008
    #17
    .
     
  18. macrumors 6502

    Joined:
    May 16, 2008
    #18
    I get the message when I plug it into my car. I use thing from Best Buy that plugs into the dock on the iPhone and the AUX plugin on the stereo. Everytime I plugged in my old iPhone (and the 3G) it says it gives the message and asks to turn Airplane mode on, of course I don't, and it still works fine.
     
  19. macrumors newbie

    Joined:
    Aug 4, 2008
    #19
    I too have the same problem,

    I've tried everything with my iphone to get rid of the message...

    'This accessory is not made to work with iPhone'

    This happened after I was in the pub and a friend knocked over a pint near my phone. Yes my fault for leaving my iphone on the table near our drinks.

    I've tried cleaning the conductors, docking station etc and nothing.

    I will be checking this everyday to see if anyone has found a solution!!!

    :apple: =)
     
  20. macrumors member

    Joined:
    Jul 14, 2008
    #20
    I too had some water damage on my phone. Everything was a little buggy for a day but it all went back to normal once it dried out. Everything except this Accessory Error message. I have tried everything to clean the connector at the bottom of the phone (3G) - compressed air, rubbing alcohol, everything. After the rubbing alcohol it worked for a few days so I thought I had the problem licked. But today it started up again. Every few minutes the error message pops up and sound won't work out of the speakers because it thinks it is plugged into something. It really sucks. I don't think there is a way to fix it. Unfortunately, because of the water indicators being pink, I'm sure I can't exchange it for a new one so looks like I'm going to be out 5 bills. Anyone figure out a sure fire way to fix this problem yet? Seems to happen on 1st gen and 2nd gen phones alike.
     
  21. macrumors 6502

    Joined:
    Jun 25, 2007
    #21
    damn this warning is annoying. how does the iPhone know that the accesory is not made for it. Why can't they disable it, if the iPhone works with it then why do they need a warning? I use my old iPod docks, but the warning keeps coming everytime i plug itin...
     
  22. macrumors newbie

    Joined:
    Aug 6, 2008
    #22
    Where are these indicators? My phone ***may*** have gotten wet at one point - we do live on a water infested planet - but I get this darn message all the time as well, and it is getting pretty frustrating.
     
  23. macrumors newbie

    Joined:
    Jul 15, 2008
    #23
    On the 3G, inside the headphone jack, underneath the dock connector, and inside the phone (there should be two round stickers). There could be more indicators but this is from what I gathered after my GF dropped hers in water. On a side note, still trying to get that working but she's probably SOL. LOL.
     
  24. macrumors newbie

    Joined:
    Aug 6, 2008
    #24
    FInally Solution

    heres how i solved it.... when i turned off my phone it would come back up in like 40 seconds... i have an airbrush machine... a blower is ok but .. airbrush is more precise.... i just blew hair into the doc connecter for about 10 seconds on each side.. then blew air side to side.. incase it was something caught it would blow it away... my compresor is bout 60psi.. doesnt matter how much u use... but its good to use an airbrush cause its thinner n goes directly to the problem.. when i turned my phone on .. it was gone .. no more of that annoying sign.... i believe i had a drop of water from washing dishes .. just keep at it... hope this helps u guys:):):):)
     
  25. macrumors regular

    eMagine

    Joined:
    Sep 18, 2006
    Location:
    Los Angeles, CA
    #25
    why were you blowing hair into it???
     

Share This Page