1. Welcome to the new MacRumors forums. See our announcement and read our FAQ

Mbox clip out problem

Discussion in 'Digital Audio' started by ldogg, Jan 1, 2006.

  1. macrumors newbie

    #1
    Hey, I’m new to this forum and also to MBox/pro tools. I am running an alesis keyboard through the Mbox with some nice monitor speakers coming out. The speakers (when not used with the mbox) can handle a huge signal, but the mbox seems to distort the tiniest volume fluctuations.

    I’m arranging a classical peice via plug ins and the whole song basically revolves around this volume swell and no matter how low I start the input signal it always clips....and its not even that loud! Anybody else have this problem? Could I possibly have a setting or something wrong? Do I need to get some kind of preamp or something? Don't really know what I'm doing!

    Thanks.
     
  2. macrumors 601

    zimv20

    #2
    how exactly is the keyboard plugged into the mbox? are you using 1/4" cables or XLR? if using XLR, i believe that turns on the mic pre's, even if the front selector is set to line in. that would definitely distort your signal.

    if you're not already, use 1/4" cables (balanced if your keyboard uses balanced outs) and ensure the source selects are set to line in on the front panel.

    this is all happening during tracking, yes? that's the way i read your post. are your levels in pro tools more or less reflecting what you're hearing? or is there a mismatch there?
     
  3. macrumors 65816

    faintember

    #3
    i think zimv20 has the right ideas. You should use 1/4" inputs to the mbox and make sure the Line In is selected. I have had some issues with my mbox not being consistent, that is with the same keyboard, one day the input will be hot, the next day it wont (and all of this is with the same software and hardware settings). Maybe there is some drift in the pots on the mbox?
     

Share This Page