need help, replacing PB g4 screen bezel

Discussion in 'MacBook Pro' started by lam47, Nov 28, 2006.

  1. lam47 macrumors member

    Joined:
    Sep 19, 2006
    #1
    Hey. Ok first thanks to the people who helped me find one, was £30 shipped, not bad at all.
    Now Im looking for some help in actually doing it. I have found a small faq But there seems to be a lot of glue involved and some more detailed information would help a great deal.
    Thankyou.
     
  2. Omegamanstyle macrumors newbie

    Joined:
    Oct 11, 2006
    Location:
    Pennsylvania, USA
    #2
    I've replaced a few displays on the Titanium PowerBook G4s - I don't know if you have an Aluminum or Titanium (big difference in terms of the display), but I couldn't have done it without the take-apart guide from ifixit. They should have just about everything you need for that:

    http://www.ifixit.com/Guide/

    Good luck - and give yourself a few hours, because getting to the display (on the TiBooks at least), requires pretty much totally dismantling the entire computer:)
     
  3. lam47 thread starter macrumors member

    Joined:
    Sep 19, 2006
    #3
    Its an aluminium one.
    Thanks so much for the link :)

    :( they dont seem to have a guide for the bezel though.
     

Share This Page