Titanium 1GHZ Powerbook and APX

Discussion in 'General Mac Discussion' started by xperton3, Apr 5, 2005.

  1. xperton3 macrumors member

    Joined:
    Feb 28, 2004
    #1
    I will be getting a Titanium 1ghz PB, it come with an Airport Card (802.11B) pre installed, just wondering if there was a way to make that an Airport Extreme (802.11G) card? Also, it comes with 512mb ram, is that 2X512 or 1X512? And is it DDR or PC100/133 SDRAM??

    thanks guys
     
  2. grapes911 Moderator emeritus

    grapes911

    Joined:
    Jul 28, 2003
    Location:
    Citizens Bank Park
    #2
    in a word, No. Its possible if you get a usb wireless g card though

    I think it could be either.

    I think its DDR They made two 1hhz PBs. One was PC2700(or something close) and the other was pc133.
     
  3. mactastic macrumors 68040

    mactastic

    Joined:
    Apr 24, 2003
    Location:
    Colly-fornia
    #3
    You could get a PCMCIA card that would give you wireless 'g'. It won't be an airport card, but it'll be the same result.
     
  4. xperton3 thread starter macrumors member

    Joined:
    Feb 28, 2004
    #4
    which PCMCIA Wireless G cards would work with a PB??
     
  5. Bear macrumors G3

    Joined:
    Jul 23, 2002
    Location:
    Sol III - Terra
    #5
    I would recommend finding a compatable PCMCIA card for the 802.11G (You will probably need to remove the AirPort card to make things work.)

    As for the memory, the TiBook 1GHz is PC 133 memory. As for the number of modules, you can either open it up and look or run the Apple System Profiler and see what it says you have (it'll also show the memory speed for confirmation.)
     
  6. xperton3 thread starter macrumors member

    Joined:
    Feb 28, 2004
    #6
    ok great, thanks for the info guys, but what PCMCIA card will be compatible with OSX 10.3.8

    Thanks
     

Share This Page