vaja ivolution Top SP

Discussion in 'iPad Accessories' started by TNSF, May 30, 2010.

  1. macrumors member

    Joined:
    Apr 18, 2010
    #1
    So I finally managed to get my iPad, camera and vaja ivolution Top SP in the same country at the same time. I apologize in advance for the photos as I'm pretty bad with a camera.

    The quality of the case is top notch, the iPad is very snug and not going anywhere and the leather smells and feels great. If you've got the money vaja makes great products.

    One of the things I like best about the case is that when resting the edge of the iPad on a surface (desk, lap, etc) the leather edging of the case makes it real comfortable.
     

    Attached Files:

  2. thread starter macrumors member

    Joined:
    Apr 18, 2010
    #2
    And a few more...
     

    Attached Files:

  3. macrumors G3

    SchneiderMan

    Joined:
    May 25, 2008
    Location:
    Apple state
    #3
    Very nice thanks for the pics :)
     
  4. macrumors regular

    arcangel6

    Joined:
    Aug 21, 2008
    Location:
    Wisconsin
    #4
    Sweet! Thanks for posting. I have this one coming, should be here this week:

    [​IMG]
     
  5. thread starter macrumors member

    Joined:
    Apr 18, 2010
    #5
    For some reason I can't find that exact one on the vaja webpage. What am I doing wrong?
     
  6. macrumors regular

    arcangel6

    Joined:
    Aug 21, 2008
    Location:
    Wisconsin
    #6
    Hi,

    Sorry, I should have explained that this was a model they listed for a short time as 'Immediately Available'. The look is called Mamut (like elephant skin but it is cow leather). It was sold at $200 as a limited edition model.

    By the way, if your decide to order a VAJA, be sure to use the coupon code MACSTORIES at checkout, and you’ll get 15% off. The coupon lasts until June 30.

    Joe
     
  7. thread starter macrumors member

    Joined:
    Apr 18, 2010
    #7
    I have to say now that I have my vaja case I am NEVER going to use my MacAlly Bookstand. The Bookstand just seems so ghetto by comparison.

    Still waiting for my dodocase so that I can do a face-off between dodo and vaja.
     
  8. macrumors regular

    Cuechick

    Joined:
    May 30, 2010
    Location:
    So Cal
    #8
    I would like to know how heavy this case is and how hard or easy is it to put the cover on and take it off? I like the look of them but am not sure about the design of a two piece cover? It seems cumbersome to me...
     
  9. macrumors regular

    Joined:
    Jan 22, 2010
    Location:
    NYC > Tampa Bay
    #9
    Personally I love the concept. You don't need a skin for protection/grip and you just snap the cover on when needed. No need for a skin and cover , you have both in one.

    My question would be how thick/bulky is it when the cover is snapped on to the bottom ?
     
  10. macrumors 6502a

    Joined:
    Mar 24, 2005
    Location:
    Canada
    #10
    Yes, could we get some edge-on shots with just the iPad + back, and iPad + back with cover snapped on?

    Thanks - Greg
     
  11. macrumors 6502

    Joined:
    Mar 12, 2009
    Location:
    Western New York
    #11
    Very sharp looking color combo.
     
  12. thread starter macrumors member

    Joined:
    Apr 18, 2010
    #12
    I took some additional photos. Again I'm not good with a camera so I hope these help. I tried a couple shots comparing it with an iPod touch and Blackberry 9700.

    Overall I think the size is great. Around the house I typically leave the front off and then snap it on when I go out.
     

    Attached Files:

  13. macrumors regular

    Joined:
    May 5, 2010
    #13
    Yeow. It looks like it nearly triples the thickness of the Ipad with the top and bottom on.
     
  14. macrumors 68030

    sracer

    Joined:
    Apr 9, 2010
    #14
    Does it look like the speaker is covered up?
     
  15. macrumors 6502

    Joined:
    Mar 12, 2009
    Location:
    Western New York
    #15
    He has the lid on backwards with the 'wide' side on the speaker area. Even with the 'narrow' side, one of the speakers gets blocked.
     
  16. macrumors 6502

    Joined:
    Mar 12, 2009
    Location:
    Western New York
    #16
    Your right, it does look triple thick. It's what has held me back. Vaja use's padding and it really adds bulk. These pictures are real good at showing that.
     
  17. macrumors 68000

    3goldens

    Joined:
    Feb 26, 2008
    #17
    I think that's a bit of an exaggeration!
    and I do not think the speaker is blocked at all if the case was put on properly.
    It's an expensive case and the company has a god reputation, so I doubt very much they would have mad such a grievous error.
    Anyway, its a nice case too limited for what I would want a case for though!
     
  18. thread starter macrumors member

    Joined:
    Apr 18, 2010
    #18
    At its thickest points I would say that the case (when both front and back are on) nearly double the thickness of the iPad. I don't have any problem with that personally.

    The top of front has a wider lip that leaves the headset jack, microphone and power button exposed. The bottom of the font has narrower lip so that the port is covered, but 2/3 of the speaker is still exposed. I don't see this as a design flaw. Rather, if the lip was any narrower it wouldn't hold very well.

    So far I have found the design to be just right :)
     
  19. thread starter macrumors member

    Joined:
    Apr 18, 2010
    #19
    The lid is on properly. The vaja logo is how you can tell, plus the wide section at the top properly exposes the headphone jack, mic and power button. Covering 1/3 of the speaker doesn't impact its usefulness from my experience. I can still hear notifications just fine.
     
  20. macrumors 6502

    Joined:
    Mar 12, 2009
    Location:
    Western New York
    #20
    It is?

    [​IMG]
     
  21. thread starter macrumors member

    Joined:
    Apr 18, 2010
    #21
    Haha yes. In that picture the lid is on the back in storage mode because someone asked to see what it looked like while on the back.
     
  22. macrumors regular

    Joined:
    Jan 22, 2010
    Location:
    NYC > Tampa Bay
    #22
    No , your missing the point. You put the lid on the back with the wide edge on the bottom instead of the top.

    Look again .... It's blocking 2+ speakers instead of only 1.

    And it sure looks 3 times as thick to me , not double.

    Good looking case but alot of extra bulk with the cover attached to the back.
     

Share This Page