Just wondering what everybody's guesses are. Is the thickest part of the MBA the hard drive, in which case it could have been built even thinner if it were only manufactured with the SSD (which can be made very thin of course)?
Got a tip for us?
Let us know
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
What are limiting factors to MBA thickness?
- Thread starter macbook123
- Start date
- Sort by reaction score
I see, with the thickest part being the CPU?
Do you happen to know how thin those 1.8" hard drives are?
Here you go its the MB and HDD at the backthe hdd is probably thicker than the MB tho
I see, so I guess it could have been made even thinner with SSD only. Means if you get the $999 upgrade you have some extra room in there for what?
The HDD clearance is apparently even compromised. Consider that they likely could only squeeze a single platter (80GB) rather than the higher capacity multi-platter Toshibas available these days.
As for the thickest part of the innards: the CPU with its weird little heat duct.
As for the thickest part of the innards: the CPU with its weird little heat duct.
5 hours for a laptop is pretty good..
and considering how thin it is.. explains why it's so wide