Resolved Boot menus for graphics output protocol.(3,1 only/AMD only)

watkipet

macrumors newbie
Aug 11, 2018
25
16
I assume you're referring to ROMDump on dosdude1's site. I tried downloading that, but Symantec Endpoint Protection (SEP) complained that it had several trojans in it. I wonder if SEP is wrong or if dosdude1's site got hacked.
[doublepost=1536942463][/doublepost]
I did a quick read through the thread. It looks like tsialex's instructions for successfully downgrading. However, I never saw anything mentioning using Firmware Restoration CD 1.8 or why that doesn't work.
 

tsialex

macrumors 604
Jun 13, 2016
7,674
8,375
Brazil
I assume you're referring to ROMDump on dosdude1's site. I tried downloading that, but Symantec Endpoint Protection (SEP) complained that it had several trojans in it. I wonder if SEP is wrong or if dosdude1's site got hacked.
Flashrom and the kext for direct hardware access are blocked in every AV/anti-malware.

About the firmware restoration CD:

Once you flash a 4,1 with the 5,1 firmware, the logic board became a 5,1 in every way except the SMC.

So, with a 5,1 Firmware you have to use the 5,1 Firmware Restoration CD.

4,1 won’t work anymore.
 
  • Like
Reactions: crjackson2134

watkipet

macrumors newbie
Aug 11, 2018
25
16
Flashrom and the kext for direct hardware access are blocked in every AV/anti-malware.
Got it. If you're listening, dosdude1, I didn't mean to come off as accusatory. :)

Once you flash a 4,1 with the 5,1 firmware, the logic board became a 5,1 in every way except the SMC.
OK. I think I understand. Other than trying to match my machine's serial number to a list of MacPro4,1 serial numbers, there's no real way for software to know that it used to be a MacPro4,1. So a 4,1 Firmware Restoration CD will refuse to work because it thinks my machine is a 5,1.
 

tsialex

macrumors 604
Jun 13, 2016
7,674
8,375
Brazil
OK. I think I understand. Other than trying to match my machine's serial number to a list of MacPro4,1 serial numbers, there's no real way for software to know that it used to be a MacPro4,1. So a 4,1 Firmware Restoration CD will refuse to work because it thinks my machine is a 5,1.
Exactly.

Like I said before, the 4,1 and 5,1 BootROMs are constructed differently. If you check a 4,1 dump and a 5,1 from the same Mac, you will see the different jump points and the way that the modules are structured.

AGAIN:

Never reconstruct a 4,1 BootROM based on the 5,1 one. You will get a brick. Extract and sanitise the NVRAM volume, extract and edit the last sector changing the jumping points.
 
  • Like
Reactions: crjackson2134

h9826790

macrumors G5
Apr 3, 2014
14,154
6,787
Hong Kong
I'm not sure anyone has been successful in reverting to 4,1 firmware. I recall a thread here a month or so ago wherein someone was trying and was ultimately unsuccessful. It would probably be possible if someone currently running 4,1 firmware would use ROMDump to dump their ROM and submit it to tsialex. But I'm not sure he's found anyone to do that yet. So if anyone sees this who hasn't yet flashed up to 5,1, please get PM tsialex before you do!
I downgraded / upgraded my cMP between 4,1 <-> 5,1 a few times, no problem at all.

So, I can confirm that the Netkas tool can downgrade a 5,1 back to 4,1.

However, for anyone that has an upgraded CPU, this may cause no boot. So, don't do it if you really know what you are doing.

P.S. I did that because I want to test if I can recover the boot manager of my Sonnet Tempo SSD by downgrading the cMP's firmware.
 
  • Like
Reactions: Synchro3

watkipet

macrumors newbie
Aug 11, 2018
25
16
Next Loader (inherited from rEFInd) does not generate any kind of log file, however I am already working on implementing a log registration system for a future version.
I saw that you did some checkins with regard to this on GitHub recently. Are you ready for us to give it a try?
 

Fuzzywuzzies

macrumors newbie
Oct 5, 2018
1
1
New Zealand
Hello all!
An avid Mac Pro fan here - I've managed to own every cheese grater since hacking my 1,1 to 64-bit-goodness back in the late 2000s.
But this is my first post on MacRumors - heck, it's my first internet forum post ever. So go easy on me! :)

Would anyone like me to put my hand up for testing?

I have some fair experience mucking around with bootloaders and diskutil and a little with GPUs, but nothing terribly deep - I usually stop at hex!
Currently I'm running a 4,1 flashed to 5,1 with an Nvidia 1070 and the stock GT120 for boot screens when required, and a box of bits for Mac-ing around. I haven't got huge amounts of time on hand with a young family to look after, but I'd like to contribute here if possible.

I especially appreciate the effort and knowledge that @DearthnVader and @tsialex have put in. I've followed Netkas since the mid 2000s, so I know what a difference even one person can make to a community.

Also I'm about to get an RX 580 so as to be able to play with Mojave. :rolleyes: Does anyone have any suggestions / recommendations as to a specific card that would be helpful for testing here?

Cheers!
 
  • Like
Reactions: ActionableMango

pciavald

macrumors newbie
Oct 18, 2018
3
0
Paris
Hi there,

I'm rehabilitating my old MacPro 4,1 upgraded to 5,1 to run macos and (as main system) linux. I've acquired a GTX 1050 Ti to replace the original Radeon HD 4870, a PCIe NVMe SSD and some RAM, and realized the mess it will be to have a nice and not too expensive card in this machine.

So I've followed these 3 threads starting june 2016 up until right here :

Jief_Machak using clover to load GOP starting a hackintosh from his MacPro, forking rEFInd, ...
https://www.insanelymac.com/forum/topic/312706-clover-on-real-mac/

The holy fork (has it been seen working ?) :
https://sourceforge.net/u/jief7/refind/ci/GOPScreen/tree/

An obscure github repo :
https://github.com/jief666/refind-edk2

Another thread about that ended with a guy in despair for help (marked as resolved, lol)
https://forums.macrumors.com/thread...d-missing-boot-menu-for-non-efi-gpus.2073571/

Also another really good resource to keep, detailing GPU compatibility for MacPro :
https://blog.greggant.com/posts/2018/05/07/definitive-mac-pro-upgrade-guide.html

I can test stuff on this mac, as I need it as my main workstation to work mainly under linux but sometimes under macos for the Adobe suite etc, so I need that boot menu, as we all do. I currently have both GPUs connected as I can't get anything out of the 1050Ti under macos, I only seen it working when booting on USB kubuntu, after the black bootscreen.

I read people getting the 1050Ti to work on Sierra and High Sierra using the latest NVIDIA web driver, but that didn't work for me on both systems, fresh install. So currently my 4k display is connected to the Radeon which renders 1080p and the 1050Ti is unused.

1. What is the status of booting as-vanilla-as-possible macos through Clover ?
2. How can I help testing forked rEFInd / Next Loader to have a working boot selection on the 1050Ti ?
3. Any ideas why the 1050Ti doesn't output anything even when the desktop is loaded ? I installed the latest NVIDIA web drivers for my macos build but after reboots it always comes back to the default driver.

Cheers and good luck
 
Last edited:

pciavald

macrumors newbie
Oct 18, 2018
3
0
Paris
So in the end everything works nicely. My 1050Ti was not recognized (could not switch driver from nvidia menu) until I did an NVRAM reset, which just fixed the problem. With the nVidia driver installed I've been able to verify that the card is Metal-compatible so I've been able to flash the boot ROM to 138.0.0.0.0 and then 140.0.0.0.0 in order to be able to natively boot High Sierra (Mojave does not have the nVidia driver yet) on NVMe. I have a steady 1.5GB/s write 1.6GB/s read on the drive, and linux is installed alongside the APFS volume.

Now currently my ATI Radeon HD 4870 and the nVidia GTX 1050Ti sit together in the cMP, so I have boot menu on my second screen and OS on both. That works for me but i'd be better off freeing space in the machine and removing the old GPU, so i'd love to test stuff if it can help.

I'll post links and details about the configuration if this threads still gets any interest.

Cheers
 

startergo

macrumors 68020
Sep 20, 2018
2,227
895
Ok let me join the party:
Just tested Clover in EFI mode. In the config file I only setup cMP properties with my exact values from the ROM. I installed Clover on a USB and than blessed it:

Code:
G5s-Mac-Pro:CLOVER g5$ sudo bless --mount /Volumes/Clover/EFI --setBoot --file /Volumes/Clover/EFI/boot/bootx64.efi --verbose
EFI found at IODeviceTree:/efi
Mount point for /Volumes/CLOVER is /Volumes/CLOVER
Mount point is '/Volumes/CLOVER'
No BootX creation requested
No boot.efi creation requested
found ioreg "FirmwareFeaturesMask"; featureMaskValue=0xFF1FFF3F
found ioreg "FirmwareFeatures"; featureFlagsValue=0xC00C5417
isPreBootEnvironmentUEFIWindowsBootCapable=0
preboot environment is not UEFI boot capable
isDVDWithElToritoWithUEFIBootableOS=0
Checking if disk is complex (if it is associated with booter partitions)
Other partition scheme detected
No auxiliary booter partition required
Preferred system partition found: disk2s1
Preferred system partition found: disk3s1
Preferred system partition found: disk4s1
Returning booter information dictionary:
<CFBasicHash 0x7f8db16004f0 [0x7fff839c98e0]>{type = mutable dict, count = 3,
entries =>
    0 : <CFString 0x107ae7be0 [0x7fff839c98e0]>{contents = "System Partitions"} = (
    disk2s1,
    disk4s1,
    disk3s1
)
    1 : <CFString 0x107ae83c0 [0x7fff839c98e0]>{contents = "Data Partitions"} = (
    disk6s1
)
    2 : <CFString 0x107ae83e0 [0x7fff839c98e0]>{contents = "Auxiliary Partitions"} = (
)
}

Relative path of /Volumes/Clover/EFI/boot/bootx64.efi is \EFI\BOOT\BOOTX64.efi
IOMedia disk6s1 does not have a partition UUID
DADiskRef disk6s1 has Volume UUID D1B06ED7-1F6A-379E-B81B-B6DBF9CC8C49
IOMedia disk6s1 has path IODeviceTree:/PCI0@0/EHC1@1D,7/@3:1
Setting EFI NVRAM:
    efi-boot-device='<array><dict><key>IOMatch</key><dict><key>IOProviderClass</key><string>IOMedia</string><key>IOPathMatch</key><string>IODeviceTree:/PCI0@0/EHC1@1D,7/@3:1</string></dict><key>BLVolumeUUID</key><string>D1B06ED7-1F6A-379E-B81B-B6DBF9CC8C49</string><key>BLLastBSDName</key><string>disk6s1</string></dict><dict><key>IOEFIDevicePathType</key><string>MediaFilePath</string><key>Path</key><string>\EFI\BOOT\BOOTX64.efi</string></dict></array>'
Setting EFI NVRAM:
    IONVRAM-DELETE-PROPERTY='efi-boot-file'
Setting EFI NVRAM:
    IONVRAM-DELETE-PROPERTY='efi-boot-mkext'
Setting EFI NVRAM:
    IONVRAM-DELETE-PROPERTY='efi-boot-kernelcache'

Boot Log:
0:100  0:100  MemLog inited, TSC freq: 3457999569
0:100  0:000  CPU was calibrated with ACPI PM Timer
0:100  0:000  
0:100  0:000  Now is 10.11.2018,  3:17:50 (GMT)
0:100  0:000  Starting Clover revision: 4741 on Apple EFI
0:100  0:000  Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED -t XCODE8 | -D NO_GRUB_DRIVERS_EMBEDDED -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE8 -n 5 | OS: 10.12.6 | XCODE: 8.3.3]
0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x1D,0x7)\USB(0x4,0x0)\HD(1,MBR,0x00000000,0x800,0x1DD5800) @73AD8518
0:100  0:000  SelfDirPath = \EFI\BOOT
0:100  0:000  === [ Get Smbios ] ========================================
0:118  0:018  Type 16 Index = 0
0:118  0:000  Total Memory Slots Count = 8
0:118  0:000  Type 17 Index = 0
0:118  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:118  0:000  SmbiosTable.Type17->Size = 16384MB
0:118  0:000  SmbiosTable.Type17->Bank/Device =  DIMM 1
0:118  0:000  SmbiosTable.Type17->Vendor = 0x0000
0:118  0:000  SmbiosTable.Type17->SerialNumber = 0x00000000
0:118  0:000  SmbiosTable.Type17->PartNumber = 0x000000000000000000000000000000000000
0:118  0:000  Type 17 Index = 1
0:118  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:118  0:000  SmbiosTable.Type17->Size = 16384MB
0:118  0:000  SmbiosTable.Type17->Bank/Device =  DIMM 2
0:118  0:000  SmbiosTable.Type17->Vendor = 0x0000
0:118  0:000  SmbiosTable.Type17->SerialNumber = 0x00000000
0:118  0:000  SmbiosTable.Type17->PartNumber = 0x000000000000000000000000000000000000
0:118  0:000  Type 17 Index = 2
0:118  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:118  0:000  SmbiosTable.Type17->Size = 16384MB
0:118  0:000  SmbiosTable.Type17->Bank/Device =  DIMM 3
0:118  0:000  SmbiosTable.Type17->Vendor = 0x0000
0:118  0:000  SmbiosTable.Type17->SerialNumber = 0x00000000
0:118  0:000  SmbiosTable.Type17->PartNumber = 0x000000000000000000000000000000000000
0:118  0:000  Type 17 Index = 3
0:118  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:118  0:000  SmbiosTable.Type17->Size = 16384MB
0:118  0:000  SmbiosTable.Type17->Bank/Device =  DIMM 4
0:118  0:000  SmbiosTable.Type17->Vendor = 0x0000
0:118  0:000  SmbiosTable.Type17->SerialNumber = 0x00000000
0:118  0:000  SmbiosTable.Type17->PartNumber = 0x000000000000000000000000000000000000
0:118  0:000  Type 17 Index = 4
0:118  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:118  0:000  SmbiosTable.Type17->Size = 16384MB
0:118  0:000  SmbiosTable.Type17->Bank/Device =  DIMM 5
0:118  0:000  SmbiosTable.Type17->Vendor = 0x0000
0:118  0:000  SmbiosTable.Type17->SerialNumber = 0x00000000
0:118  0:000  SmbiosTable.Type17->PartNumber = 0x000000000000000000000000000000000000
0:118  0:000  Type 17 Index = 5
0:118  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:118  0:000  SmbiosTable.Type17->Size = 16384MB
0:118  0:000  SmbiosTable.Type17->Bank/Device =  DIMM 6
0:118  0:000  SmbiosTable.Type17->Vendor = 0x0000
0:118  0:000  SmbiosTable.Type17->SerialNumber = 0x00000000
0:118  0:000  SmbiosTable.Type17->PartNumber = 0x000000000000000000000000000000000000
0:118  0:000  Type 17 Index = 6
0:118  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:118  0:000  SmbiosTable.Type17->Size = 16384MB
0:118  0:000  SmbiosTable.Type17->Bank/Device =  DIMM 7
0:118  0:000  SmbiosTable.Type17->Vendor = 0x0000
0:118  0:000  SmbiosTable.Type17->SerialNumber = 0x00000000
0:118  0:000  SmbiosTable.Type17->PartNumber = 0x000000000000000000000000000000000000
0:118  0:000  Type 17 Index = 7
0:118  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:118  0:000  SmbiosTable.Type17->Size = 16384MB
0:118  0:000  SmbiosTable.Type17->Bank/Device =  DIMM 8
0:118  0:000  SmbiosTable.Type17->Vendor = 0x0000
0:118  0:000  SmbiosTable.Type17->SerialNumber = 0x00000000
0:118  0:000  SmbiosTable.Type17->PartNumber = 0x000000000000000000000000000000000000
0:118  0:000  Boot status=0
0:118  0:000  Running on: 'MacPro5,1' with board 'Mac-F221BEC8'
0:118  0:000  === [ GetCPUProperties ] ==================================
0:118  0:000  CPU Vendor = 756E6547 Model=206C2
0:118  0:000   The CPU supported SSE4.1
0:118  0:000  BrandString = Intel(R) Xeon(R) CPU           X5690  @ 3.47GHz
0:118  0:000   The CPU supported turbo
0:118  0:000  non-usable FLEX_RATIO = 13F00
0:118  0:000  FSBFrequency = 134 MHz, DMI FSBFrequency = 133 MHz, Corrected FSBFrequency = 133 MHz
0:118  0:000  MaxDiv/MinDiv: 26.0/12
0:118  0:000  Turbo: 27/27/28/28
0:118  0:000  Features: 0xBFEBFBFF
0:118  0:000  Threads: 12
0:118  0:000  Cores: 6
0:118  0:000  FSB: 133 MHz
0:118  0:000  CPU: 3460 MHz
0:118  0:000  TSC: 3460 MHz
0:118  0:000  PIS: 533 MHz
0:118  0:000  ExternalClock: 133 MHz
0:118  0:000  === [ GetDevices ] ========================================
0:118  0:000  PCI (00|00:00.00) : 8086 3406 class=060000
0:118  0:000  PCI (00|00:01.00) : 8086 3408 class=060400
0:118  0:000  PCI (00|01:00.00) : 111D 8061 class=060400
0:118  0:000  PCI (00|02:02.00) : 111D 8061 class=060400
0:118  0:000  PCI (00|02:04.00) : 111D 8061 class=060400
0:118  0:000  PCI (00|04:00.00) : 12D8 2308 class=060400
0:118  0:000  PCI (00|05:01.00) : 12D8 2308 class=060400
0:118  0:000  PCI (00|06:00.00) : 1B21 0625 class=010601
0:118  0:000  PCI (00|05:02.00) : 12D8 2308 class=060400
0:118  0:000  PCI (00|07:00.00) : 1B21 0625 class=010601
0:118  0:000  PCI (00|00:03.00) : 8086 340A class=060400
0:118  0:000  PCI (00|08:00.00) : 1002 67DF class=030000
0:118  0:000   - GFX: Model=AMD Radeon RX 480 (ATI/AMD)
0:118  0:000  PCI (00|08:00.01) : 1002 AAF0 class=040300
0:118  0:000   - HDMI Audio: 
0:118  0:000  PCI (00|00:07.00) : 8086 340E class=060400
0:118  0:000  PCI (00|00:0D.00) : 8086 343A class=060000
0:118  0:000  PCI (00|00:0D.01) : 8086 343B class=060000
0:118  0:000  PCI (00|00:0D.02) : 8086 343C class=060000
0:118  0:000  PCI (00|00:0D.03) : 8086 343D class=060000
0:118  0:000  PCI (00|00:0D.04) : 8086 3418 class=060000
0:118  0:000  PCI (00|00:0D.05) : 8086 3419 class=060000
0:118  0:000  PCI (00|00:0D.06) : 8086 341A class=060000
0:118  0:000  PCI (00|00:0D.07) : 8086 341B class=060000
0:118  0:000  PCI (00|00:0E.00) : 8086 341C class=060000
0:118  0:000  PCI (00|00:0E.01) : 8086 341D class=060000
0:118  0:000  PCI (00|00:0E.02) : 8086 341E class=060000
0:118  0:000  PCI (00|00:0E.03) : 8086 341F class=060000
0:118  0:000  PCI (00|00:0E.04) : 8086 3439 class=060000
0:118  0:000  PCI (00|00:0F.00) : 8086 3424 class=110100
0:118  0:000  PCI (00|00:10.00) : 8086 3425 class=080000
0:118  0:000  PCI (00|00:10.01) : 8086 3426 class=080000
0:118  0:000  PCI (00|00:11.00) : 8086 3427 class=080000
0:118  0:000  PCI (00|00:11.01) : 8086 3428 class=080000
0:118  0:000  PCI (00|00:14.00) : 8086 342E class=080000
0:118  0:000  PCI (00|00:14.01) : 8086 3422 class=080000
0:118  0:000  PCI (00|00:14.02) : 8086 3423 class=080000
0:118  0:000  PCI (00|00:14.03) : 8086 3438 class=080000
0:118  0:000  PCI (00|00:15.00) : 8086 342F class=080020
0:118  0:000  PCI (00|00:16.00) : 8086 3430 class=088000
0:118  0:000  PCI (00|00:16.01) : 8086 3431 class=088000
0:118  0:000  PCI (00|00:16.02) : 8086 3432 class=088000
0:118  0:000  PCI (00|00:16.03) : 8086 3433 class=088000
0:118  0:000  PCI (00|00:16.04) : 8086 3429 class=088000
0:118  0:000  PCI (00|00:16.05) : 8086 342A class=088000
0:118  0:000  PCI (00|00:16.06) : 8086 342B class=088000
0:118  0:000  PCI (00|00:16.07) : 8086 342C class=088000
0:118  0:000  PCI (00|00:1A.00) : 8086 3A37 class=0C0300
0:118  0:000  PCI (00|00:1A.01) : 8086 3A38 class=0C0300
0:118  0:000  PCI (00|00:1A.02) : 8086 3A39 class=0C0300
0:118  0:000  PCI (00|00:1A.07) : 8086 3A3C class=0C0320
0:118  0:000  PCI (00|00:1B.00) : 8086 3A3E class=040300
0:118  0:000  PCI (00|00:1C.00) : 8086 3A40 class=060400
0:118  0:000  PCI (00|00:1C.01) : 8086 3A42 class=060400
0:119  0:000  PCI (00|00:1C.02) : 8086 3A44 class=060400
0:119  0:000  PCI (00|0C:00.00) : 8086 10F6 class=020000
0:119  0:000   - LAN: 0 Vendor=Intel
0:119  0:000  PCI (00|00:1C.03) : 8086 3A46 class=060400
0:119  0:000  PCI (00|0D:00.00) : 8086 10F6 class=020000
0:119  0:000   - LAN: 1 Vendor=Intel
0:119  0:000  PCI (00|00:1C.04) : 8086 3A48 class=060400
0:119  0:000  PCI (00|0E:00.00) : 104C 823E class=060400
0:119  0:000  PCI (00|0F:00.00) : 104C 823F class=0C0010
0:119  0:000  PCI (00|00:1C.05) : 8086 3A4A class=060400
0:119  0:000  PCI (00|10:00.00) : 14E4 432B class=028000
0:119  0:000   - WIFI: Vendor=Broadcom
0:119  0:000  PCI (00|00:1D.00) : 8086 3A34 class=0C0300
0:119  0:000  PCI (00|00:1D.01) : 8086 3A35 class=0C0300
0:119  0:000  PCI (00|00:1D.02) : 8086 3A36 class=0C0300
0:119  0:000  PCI (00|00:1D.07) : 8086 3A3A class=0C0320
0:119  0:000  PCI (00|00:1E.00) : 8086 244E class=060401
0:119  0:000  PCI (00|00:1F.00) : 8086 3A18 class=060100
0:119  0:000  PCI (00|00:1F.02) : 8086 3A22 class=010601
0:119  0:000  PCI (00|00:1F.03) : 8086 3A30 class=0C0500
0:119  0:000  PCI (00|00:1F.05) : 8086 3A26 class=010185
0:119  0:000  === [ GetDefaultSettings ] ================================
0:119  0:000  Clover load options size = 0 bytes
0:127  0:008  EFI\CLOVER\config.plist loaded: Success
0:179  0:051  === [ GetListOfThemes ] ===================================
0:183  0:004  - [00]: embedded
0:183  0:000  - [00]: random
0:187  0:004  - [00]: newyear
0:195  0:008  - [01]: christmas
0:203  0:008  === [ Found config plists ] ===============================
0:204  0:000  - Config.plist
0:204  0:000  === [ GetEarlyUserSettings ] ==============================
0:204  0:000  timeout set to 5
0:204  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:284  0:080  === [ LoadDrivers ] =======================================
1:428  1:143  Loading BiosVideo.efi  status=Success
1:514  0:086   - driver needs connecting
1:542  0:027  Loading ApfsDriverLoader-64.efi  status=Success
1:625  0:083   - driver needs connecting
1:653  0:027  Loading Fat-64.efi  status=Success
1:741  0:088   - driver needs connecting
1:768  0:027  Loading NvmExpressDxe-64.efi  status=Success
1:860  0:091   - driver needs connecting
1:887  0:027  Loading PartitionDxe-64.efi  status=Success
1:976  0:088   - driver needs connecting
2:003  0:027  Loading EmuGopDxe.efi  status=Success
2:092  0:088   - driver needs connecting
2:119  0:027  Loading UsbMassStorageDxe.efi  status=Success
2:209  0:089   - driver needs connecting
2:236  0:026  7 drivers needs connecting ...
2:264  0:028  PlatformDriverOverrideProtocol not found. Installing ... Success
2:319  0:054  Partition driver loaded: CD disconnect Success
2:401  0:082  APFS driver loaded
2:429  0:027  Video driver loaded: disconnect Success
2:513  0:084  Searching for invalid DiskIo BY_DRIVER connects:
2:571  0:057   - Handle 73277A18 with DiskIo, is Partition, no Fs, BY_DRIVER Agent: 72E0C918, Disconnect: Success
3:306  0:734  === [ InitScreen ] ========================================
4:459  1:152  Console modes reported: 1, available modes:
4:487  0:027   - [01]: 80x25 (current mode)
4:514  0:027  reinit: self device path=PciRoot(0x0)\Pci(0x1D,0x7)\USB(0x4,0x0)\HD(1,MBR,0x00000000,0x800,0x1DD5800)
4:542  0:028  Using embedded font: Success
4:570  0:027  === [ GetMacAddress ] =====================================
5:650  1:079  MAC address of LAN #0= Private
5:872  0:221  MAC address of LAN #1= Private
6:093  0:221  === [ ScanSPD ] ===========================================
7:333  1:239  SMBus device : 8086 3A30 class=0C0500 status=Success
7:360  0:027  SMBus CmdReg: 0x1
7:388  0:027  Scanning SMBus [8086:3A30], mmio: 0x90924004, ioport: 0x4000, hostc: 0x1
7:415  0:027  Slots to scan [8]...
7:445  0:029  === [ GetAcpiTablesList ] =================================
8:463  1:018  Get Acpi Tables List from RSDT:
8:516  0:052   - [00]: FACP  Apple00 len=244
8:544  0:027   - [01]: ECDT  Apple00 len=83
8:571  0:027   - [02]: HPET  Apple00 len=56
8:599  0:027   - [03]: APIC  Apple00 len=424
8:627  0:027   - [04]: SSDT  CpuPPM len=85884
8:654  0:027   - [05]: SSDT  SataAhci len=484
8:682  0:027   - [06]: SSDT  NoHdau len=1733
8:713  0:030   - [07]: MCFG  Apple00 len=60
8:738  0:025   - [08]: DMAR  Apple00 len=104
8:766  0:027  Calibrated TSC Frequency = 3457999569 = 3457MHz
8:794  0:027  === [ GetUserSettings ] ===================================
9:831  1:037  USB FixOwnership: no
9:859  0:027   - final DSDT Fix mask=00000000
9:886  0:027  Using ProductName from config: MacPro5,1
9:914  0:028  Found same BiosVersion in clover and config
9:941  0:027  BiosVersion: MP51.88Z.F000.B00.1809191555
9:969  0:027  BiosReleaseDate: 09/19/18
9:997  0:027  Using EfiVersion from config: 140.0.0.0.0
10:025  0:028  Using FirmwareFeatures from config: 0x17540CC0
10:052  0:027  Using FirmwareFeaturesMask from config: 0x3FFF1FFF
10:080  0:027  PlatformFeature will not set in SMBIOS
10:107  0:027  Board-ID set from config as Mac-F221BEC8
10:135  0:028  BoardType: 0xB
10:162  0:027  ChassisType: 0x7
10:190  0:027  QPI: use Table 132
10:221  0:030  === [ Found DSDT tables ] =================================
11:192  0:971  === [ ScanVolumes ] =======================================
12:324  1:131  Found 27 volumes with blockIO
12:361  0:037  - [00]: Volume: PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Pci(0x4,0x0)\Pci(0x0,0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)
12:424  0:062  - [01]: Volume: PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Pci(0x4,0x0)\Pci(0x0,0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(1,GPT,F5CC509D-EFF5-4D47-95DF-5466F14122D3,0x800,0x64000)
12:480  0:056          Result of bootcode detection: bootable unknown (legacy)
12:508  0:027  - [02]: Volume: PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Pci(0x4,0x0)\Pci(0x0,0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(2,GPT,9D9B9669-B225-4AD4-CD6D-1786E3E9F8AF,0x65000,0x8000)
12:565  0:056  - [03]: Volume: PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Pci(0x4,0x0)\Pci(0x0,0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(3,GPT,8431278A-5626-4061-0AF6-E40597D095D8,0x6D000,0xDE3E000)
12:621  0:056          Result of bootcode detection: bootable Windows (vista,win)
12:648  0:027  - [04]: Volume: PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Pci(0x4,0x0)\Pci(0x0,0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(4,GPT,9F0C3D7F-E8D5-4D40-6853-6EA48EA71B44,0xDEAB000,0xE8800)
12:706  0:057          Result of bootcode detection: bootable Windows (vista,win)
12:733  0:026  - [05]: Volume: PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Pci(0x4,0x0)\Pci(0x0,0x0)\Pci(0x2,0x0)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)
12:794  0:060  - [06]: Volume: PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Pci(0x4,0x0)\Pci(0x0,0x0)\Pci(0x2,0x0)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(1,GPT,DD79AD8B-BFA2-4E35-BAB9-C99D436B816E,0x28,0x64000)
12:849  0:055          Result of bootcode detection: bootable unknown (legacy)
12:877  0:027  - [07]: Volume: PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Pci(0x4,0x0)\Pci(0x0,0x0)\Pci(0x2,0x0)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(2,GPT,8C29C86F-7E0B-47C8-93AD-2D9D409DA583,0x64028,0x1BD8A540)
12:934  0:057  - [08]: Volume: PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Pci(0x4,0x0)\Pci(0x0,0x0)\Pci(0x2,0x0)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(3,GPT,4BF7E235-83E3-411F-92DC-844578DA24E5,0x1BDEE568,0x135F20)
12:990  0:055  - [09]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)
13:046  0:056  - [10]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)\HD(1,GPT,08C8A79A-9510-441B-BE7A-5B2ED808A16A,0x28,0x64000)
13:103  0:056          Result of bootcode detection: bootable unknown (legacy)
13:131  0:028  - [11]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)\HD(2,GPT,563C4384-827A-4A93-881C-5FBFB992E031,0x64028,0x246269960)
13:187  0:056  - [12]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0x0,0x0)
13:244  0:057  - [13]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0x0,0x0)\HD(1,GPT,5ACC50D0-A941-43B9-B2C0-B0C3967B0862,0x28,0x64000)
13:300  0:056          Result of bootcode detection: bootable unknown (legacy)
13:328  0:027  - [14]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0x0,0x0)\HD(2,GPT,4594F987-DBAD-4166-8B02-30C78AC924F1,0x64028,0x746A2D60)
13:384  0:056          Result of bootcode detection: bootable unknown (legacy)
13:412  0:027  - [15]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0)
13:469  0:056  - [16]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0)\HD(1,GPT,DFE554C1-20B9-4A2E-AA8E-12E30EAA3CF3,0x28,0x64000)
13:561  0:092          Result of bootcode detection: bootable unknown (legacy)
13:588  0:027  - [17]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0)\HD(2,GPT,3FDE4C70-3991-44F1-BB96-EDEB68A2EFB7,0x64800,0x8000)
13:645  0:056  - [18]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0)\HD(3,GPT,1B147299-1289-4445-A635-3A3C4533DFBE,0x6C800,0x1D05300D)
13:704  0:059          Result of bootcode detection: bootable Windows (vista,win)
13:730  0:025  - [19]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0)\HD(4,GPT,059C9C95-F981-41EC-B292-A669F7E58501,0x1D0C0000,0xE8800)
13:786  0:055          Result of bootcode detection: bootable Windows (vista,win)
13:813  0:027  - [20]: Volume: PciRoot(0x0)\Pci(0x1D,0x7)\USB(0x4,0x0)
13:871  0:057          USB volume
13:898  0:027  - [21]: Volume: PciRoot(0x0)\Pci(0x1D,0x7)\USB(0x4,0x0)\HD(1,MBR,0x00000000,0x800,0x1DD5800)
13:958  0:059          Result of bootcode detection: bootable unknown (legacy)
13:983  0:025          USB volume
14:011  0:027          This is SelfVolume !!
14:039  0:027  - [22]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)
14:094  0:055          Found optical drive
14:122  0:027  - [23]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0x0,0x0)\HD(2,GPT,4594F987-DBAD-4166-8B02-30C78AC924F1,0x64028,0x746A2D60)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,41D30E05471CDD448FC39DD446B06C03)
14:178  0:055  - [24]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0x0,0x0)\HD(2,GPT,4594F987-DBAD-4166-8B02-30C78AC924F1,0x64028,0x746A2D60)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,6240C61D76BBAB349D1702174E1CAC50)
14:234  0:055  - [25]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0x0,0x0)\HD(2,GPT,4594F987-DBAD-4166-8B02-30C78AC924F1,0x64028,0x746A2D60)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,D173968594D6574AB78522A943AD91C3)
14:289  0:055  - [26]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0x0,0x0)\HD(2,GPT,4594F987-DBAD-4166-8B02-30C78AC924F1,0x64028,0x746A2D60)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,8F018FFC8D587446B326B6D4971D7076)
14:345  0:055  === [ InitTheme ] =========================================
15:549  1:204  no default theme, get random theme newyear
15:576  0:027   using embedded theme
15:605  0:028  Using embedded font: Success
15:633  0:027  theme inited
15:660  0:027  Chosen embedded theme
15:688  0:027  after NVRAM boot-args=-v darkwake=no debug=0x100
15:718  0:030  === [ Dump SMC keys from NVRAM ] ==========================
16:491  0:772  found AppleSMC protocol
16:518  0:027  === [ ScanLoader ] ========================================
17:681  1:163  - [01]: 'EFI'
17:742  0:060          AddLoaderEntry for Volume Name=EFI
17:774  0:031          AddLoaderEntry for Volume Name=EFI
17:801  0:027          skipped because entry is hidden
17:829  0:027  - [06]: 'EFI'
17:909  0:079  - [07]: 'SierraSSD'
17:973  0:063          AddLoaderEntry for Volume Name=SierraSSD
18:005  0:031      Check if volume Is Hibernated:
18:032  0:027      Check sleep image 'by signature':
18:068  0:035      read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success
18:096  0:027      using default sleep image name = \private\var\vm\sleepimage
18:129  0:033      sleepimage not found -> Not Found
18:155  0:025      hibernated: no - sign
18:192  0:037  - [08]: 'Recovery HD'
18:260  0:068          AddLoaderEntry for Volume Name=Recovery HD
18:291  0:030  - [10]: 'EFI'
18:346  0:055  - [11]: 'Backup'
18:403  0:056  - [13]: 'EFI'
18:458  0:055  - [16]: 'EFI'
18:518  0:059          AddLoaderEntry for Volume Name=EFI
18:550  0:031          AddLoaderEntry for Volume Name=EFI
18:577  0:027          skipped because entry is hidden
18:605  0:027  - [21]: 'CLOVER'
18:661  0:056          AddLoaderEntry for Volume Name=CLOVER
18:689  0:027          skipped because entry is hidden
18:718  0:029  - [23]: 'Preboot'
18:779  0:061          AddLoaderEntry for Volume Name=Preboot
18:831  0:051      Check if volume Is Hibernated:
18:859  0:027      Check sleep image 'by signature':
18:887  0:027      using default sleep image name = \private\var\vm\sleepimage
18:915  0:028      sleepimage not found -> Not Found
18:942  0:027      hibernated: no - sign
18:973  0:030          AddLoaderEntry for Volume Name=Preboot
19:022  0:049  - [24]: 'Mojave'
19:294  0:271          AddLoaderEntry for Volume Name=Mojave
19:362  0:067      Check if volume Is Hibernated:
19:388  0:026      Check sleep image 'by signature':
19:551  0:162      read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success
19:577  0:025      using default sleep image name = \private\var\vm\sleepimage
19:645  0:068      sleepimage not found -> Not Found
19:672  0:026      hibernated: no - sign
19:708  0:036  - [25]: 'Recovery'
19:766  0:057          AddLoaderEntry for Volume Name=Recovery
19:811  0:045  - [26]: 'VM'
19:867  0:055  Scanning legacy ...
19:895  0:027   3: 'Legacy HD3' (vista,win) add legacy
19:950  0:055   added 'Boot Windows from Legacy HD3' OSType=2 Icon=vista,win
19:978  0:027   4: 'Legacy HD4' (vista,win) add legacy
20:033  0:055   added 'Boot Windows from Legacy HD4' OSType=2 Icon=vista,win
20:061  0:027  18: 'Legacy HD3' (vista,win) add legacy
20:116  0:055   added 'Boot Windows from Legacy HD3' OSType=2 Icon=vista,win
20:143  0:027  19: 'Legacy HD4' (vista,win) add legacy
20:200  0:056   added 'Boot Windows from Legacy HD4' OSType=2 Icon=vista,win
20:227  0:027  === [ AddCustomTool ] =====================================
21:311  1:083  found tool \EFI\CLOVER\tools\Shell64U.efi
21:338  0:027  Checking EFI partition Volume 1 for Clover
21:365  0:027  Checking EFI partition Volume 6 for Clover
21:393  0:027  Checking EFI partition Volume 10 for Clover
21:420  0:026  Checking EFI partition Volume 13 for Clover
21:447  0:027  Checking EFI partition Volume 16 for Clover
21:475  0:027  === [ GetEfiBootDeviceFromNvram ] =========================
22:239  0:764   - efi-boot-device-data: PciRoot(0x0)\Pci(0x1D,0x7)\USB(0x4,0x0)\HD(1,MBR,0x00000000,0x800,0x1DD5800)\EFI\BOOT\BOOTX64.efii
22:268  0:028    - Volume: 'PciRoot(0x0)\Pci(0x1D,0x7)\USB(0x4,0x0)\HD(1,MBR,0x00000000,0x800,0x1DD5800)'
22:295  0:027    - LoaderPath: '\EFI\BOOT\BOOTX64.efi'
22:323  0:027  === [ FindStartupDiskVolume ] =============================
23:183  0:860    - Volume: partition = PciRoot(0x0)\Pci(0x1D,0x7)\USB(0x4,0x0)\HD(1,MBR,0x00000000,0x800,0x1DD5800)
23:213  0:029     - searching for that partition and loader '\EFI\BOOT\BOOTX64.efi'
23:239  0:026      - [!] not found
23:267  0:027     - searching again, but comparing Media dev path nodes
23:295  0:027      - [!] not found
23:323  0:027     - searching for that partition
23:350  0:027      - [!] not found
23:379  0:028     - searching again, but comparing Media dev path nodes
23:406  0:027      - [!] not found
23:434  0:027  Default boot entry not found
23:462  0:027  DefaultIndex=-1 and MainMenu.EntryCount=17
23:491  0:029  GUI ready
277:962  254:470  ParseBootOption: invalid boot variable
277:989  0:027  BootVariable of the entry is empty
278:017  0:027  === [ StartLoader ] =======================================
279:166  1:149  Finally: ExternalClock=133MHz BusSpeed=133000kHz CPUFreq=3458MHz PIS: hw.busfrequency=532000000Hz
279:221  0:054  Loading bootmgfw.efi  status=Success
279:319  0:098  Closing events for Windows
279:346  0:027  OtherOS: Found Acpi 2.0 RSDP 0x775AE014
279:375  0:028  RSDT at 775AE0FC
279:402  0:027  XSDT at 775AE1C0
279:430  0:027  FADT pointer = 775AB000
279:465  0:035  Cleanup RSDT: count=9, length=72
279:491  0:026  corrected RSDT: count=9, length=72
279:518  0:027  Cleanup XSDT: count=9, length=108
279:546  0:027  corrected XSDT count=9, length=108
279:574  0:027  SetStartupDiskVolume:
279:602  0:027    * Volume: 'EFI'
279:630  0:027    * LoaderPath: '\EFI\microsoft\Boot\bootmgfw.efi'
279:659  0:029    * DevPath: EFI
279:685  0:026    * GUID = F5CC509D-EFF5-4D47-95DF-5466F14122D3
279:743  0:057    * efi-boot-device: <array><dict><key>IOMatch</key><dict><key>IOProviderClass</key><string>IOMedia</string><key>IOPropertyMatch</key><dict><key>UUID</key><string>F5CC509D-EFF5-4D47-95DF-5466F14122D3</string></dict></dict></dict></array>
279:834  0:091  Closing log
Booted with clover to a black screen and stayed there forever until I pressed enter. I saw activity on my USB drive and booted to my Windows partition (probably the current selected partition before I hit enter)
 
  • Like
Reactions: h9826790

DearthnVader

macrumors 65816
Original poster
Dec 17, 2015
1,138
5,729
Red Springs, NC
Ok let me join the party:
Just tested Clover in EFI mode. In the config file I only setup cMP properties with my exact values from the ROM. I installed Clover on a USB and than blessed it:

Code:
G5s-Mac-Pro:CLOVER g5$ sudo bless --mount /Volumes/Clover/EFI --setBoot --file /Volumes/Clover/EFI/boot/bootx64.efi --verbose
EFI found at IODeviceTree:/efi
Mount point for /Volumes/CLOVER is /Volumes/CLOVER
Mount point is '/Volumes/CLOVER'
No BootX creation requested
No boot.efi creation requested
found ioreg "FirmwareFeaturesMask"; featureMaskValue=0xFF1FFF3F
found ioreg "FirmwareFeatures"; featureFlagsValue=0xC00C5417
isPreBootEnvironmentUEFIWindowsBootCapable=0
preboot environment is not UEFI boot capable
isDVDWithElToritoWithUEFIBootableOS=0
Checking if disk is complex (if it is associated with booter partitions)
Other partition scheme detected
No auxiliary booter partition required
Preferred system partition found: disk2s1
Preferred system partition found: disk3s1
Preferred system partition found: disk4s1
Returning booter information dictionary:
<CFBasicHash 0x7f8db16004f0 [0x7fff839c98e0]>{type = mutable dict, count = 3,
entries =>
    0 : <CFString 0x107ae7be0 [0x7fff839c98e0]>{contents = "System Partitions"} = (
    disk2s1,
    disk4s1,
    disk3s1
)
    1 : <CFString 0x107ae83c0 [0x7fff839c98e0]>{contents = "Data Partitions"} = (
    disk6s1
)
    2 : <CFString 0x107ae83e0 [0x7fff839c98e0]>{contents = "Auxiliary Partitions"} = (
)
}

Relative path of /Volumes/Clover/EFI/boot/bootx64.efi is \EFI\BOOT\BOOTX64.efi
IOMedia disk6s1 does not have a partition UUID
DADiskRef disk6s1 has Volume UUID D1B06ED7-1F6A-379E-B81B-B6DBF9CC8C49
IOMedia disk6s1 has path IODeviceTree:/PCI0@0/EHC1@1D,7/@3:1
Setting EFI NVRAM:
    efi-boot-device='<array><dict><key>IOMatch</key><dict><key>IOProviderClass</key><string>IOMedia</string><key>IOPathMatch</key><string>IODeviceTree:/PCI0@0/EHC1@1D,7/@3:1</string></dict><key>BLVolumeUUID</key><string>D1B06ED7-1F6A-379E-B81B-B6DBF9CC8C49</string><key>BLLastBSDName</key><string>disk6s1</string></dict><dict><key>IOEFIDevicePathType</key><string>MediaFilePath</string><key>Path</key><string>\EFI\BOOT\BOOTX64.efi</string></dict></array>'
Setting EFI NVRAM:
    IONVRAM-DELETE-PROPERTY='efi-boot-file'
Setting EFI NVRAM:
    IONVRAM-DELETE-PROPERTY='efi-boot-mkext'
Setting EFI NVRAM:
    IONVRAM-DELETE-PROPERTY='efi-boot-kernelcache'

Boot Log:
0:100  0:100  MemLog inited, TSC freq: 3457999569
0:100  0:000  CPU was calibrated with ACPI PM Timer
0:100  0:000
0:100  0:000  Now is 10.11.2018,  3:17:50 (GMT)
0:100  0:000  Starting Clover revision: 4741 on Apple EFI
0:100  0:000  Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED -t XCODE8 | -D NO_GRUB_DRIVERS_EMBEDDED -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE8 -n 5 | OS: 10.12.6 | XCODE: 8.3.3]
0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x1D,0x7)\USB(0x4,0x0)\HD(1,MBR,0x00000000,0x800,0x1DD5800) @73AD8518
0:100  0:000  SelfDirPath = \EFI\BOOT
0:100  0:000  === [ Get Smbios ] ========================================
0:118  0:018  Type 16 Index = 0
0:118  0:000  Total Memory Slots Count = 8
0:118  0:000  Type 17 Index = 0
0:118  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:118  0:000  SmbiosTable.Type17->Size = 16384MB
0:118  0:000  SmbiosTable.Type17->Bank/Device =  DIMM 1
0:118  0:000  SmbiosTable.Type17->Vendor = 0x0000
0:118  0:000  SmbiosTable.Type17->SerialNumber = 0x00000000
0:118  0:000  SmbiosTable.Type17->PartNumber = 0x000000000000000000000000000000000000
0:118  0:000  Type 17 Index = 1
0:118  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:118  0:000  SmbiosTable.Type17->Size = 16384MB
0:118  0:000  SmbiosTable.Type17->Bank/Device =  DIMM 2
0:118  0:000  SmbiosTable.Type17->Vendor = 0x0000
0:118  0:000  SmbiosTable.Type17->SerialNumber = 0x00000000
0:118  0:000  SmbiosTable.Type17->PartNumber = 0x000000000000000000000000000000000000
0:118  0:000  Type 17 Index = 2
0:118  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:118  0:000  SmbiosTable.Type17->Size = 16384MB
0:118  0:000  SmbiosTable.Type17->Bank/Device =  DIMM 3
0:118  0:000  SmbiosTable.Type17->Vendor = 0x0000
0:118  0:000  SmbiosTable.Type17->SerialNumber = 0x00000000
0:118  0:000  SmbiosTable.Type17->PartNumber = 0x000000000000000000000000000000000000
0:118  0:000  Type 17 Index = 3
0:118  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:118  0:000  SmbiosTable.Type17->Size = 16384MB
0:118  0:000  SmbiosTable.Type17->Bank/Device =  DIMM 4
0:118  0:000  SmbiosTable.Type17->Vendor = 0x0000
0:118  0:000  SmbiosTable.Type17->SerialNumber = 0x00000000
0:118  0:000  SmbiosTable.Type17->PartNumber = 0x000000000000000000000000000000000000
0:118  0:000  Type 17 Index = 4
0:118  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:118  0:000  SmbiosTable.Type17->Size = 16384MB
0:118  0:000  SmbiosTable.Type17->Bank/Device =  DIMM 5
0:118  0:000  SmbiosTable.Type17->Vendor = 0x0000
0:118  0:000  SmbiosTable.Type17->SerialNumber = 0x00000000
0:118  0:000  SmbiosTable.Type17->PartNumber = 0x000000000000000000000000000000000000
0:118  0:000  Type 17 Index = 5
0:118  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:118  0:000  SmbiosTable.Type17->Size = 16384MB
0:118  0:000  SmbiosTable.Type17->Bank/Device =  DIMM 6
0:118  0:000  SmbiosTable.Type17->Vendor = 0x0000
0:118  0:000  SmbiosTable.Type17->SerialNumber = 0x00000000
0:118  0:000  SmbiosTable.Type17->PartNumber = 0x000000000000000000000000000000000000
0:118  0:000  Type 17 Index = 6
0:118  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:118  0:000  SmbiosTable.Type17->Size = 16384MB
0:118  0:000  SmbiosTable.Type17->Bank/Device =  DIMM 7
0:118  0:000  SmbiosTable.Type17->Vendor = 0x0000
0:118  0:000  SmbiosTable.Type17->SerialNumber = 0x00000000
0:118  0:000  SmbiosTable.Type17->PartNumber = 0x000000000000000000000000000000000000
0:118  0:000  Type 17 Index = 7
0:118  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:118  0:000  SmbiosTable.Type17->Size = 16384MB
0:118  0:000  SmbiosTable.Type17->Bank/Device =  DIMM 8
0:118  0:000  SmbiosTable.Type17->Vendor = 0x0000
0:118  0:000  SmbiosTable.Type17->SerialNumber = 0x00000000
0:118  0:000  SmbiosTable.Type17->PartNumber = 0x000000000000000000000000000000000000
0:118  0:000  Boot status=0
0:118  0:000  Running on: 'MacPro5,1' with board 'Mac-F221BEC8'
0:118  0:000  === [ GetCPUProperties ] ==================================
0:118  0:000  CPU Vendor = 756E6547 Model=206C2
0:118  0:000   The CPU supported SSE4.1
0:118  0:000  BrandString = Intel(R) Xeon(R) CPU           X5690  @ 3.47GHz
0:118  0:000   The CPU supported turbo
0:118  0:000  non-usable FLEX_RATIO = 13F00
0:118  0:000  FSBFrequency = 134 MHz, DMI FSBFrequency = 133 MHz, Corrected FSBFrequency = 133 MHz
0:118  0:000  MaxDiv/MinDiv: 26.0/12
0:118  0:000  Turbo: 27/27/28/28
0:118  0:000  Features: 0xBFEBFBFF
0:118  0:000  Threads: 12
0:118  0:000  Cores: 6
0:118  0:000  FSB: 133 MHz
0:118  0:000  CPU: 3460 MHz
0:118  0:000  TSC: 3460 MHz
0:118  0:000  PIS: 533 MHz
0:118  0:000  ExternalClock: 133 MHz
0:118  0:000  === [ GetDevices ] ========================================
0:118  0:000  PCI (00|00:00.00) : 8086 3406 class=060000
0:118  0:000  PCI (00|00:01.00) : 8086 3408 class=060400
0:118  0:000  PCI (00|01:00.00) : 111D 8061 class=060400
0:118  0:000  PCI (00|02:02.00) : 111D 8061 class=060400
0:118  0:000  PCI (00|02:04.00) : 111D 8061 class=060400
0:118  0:000  PCI (00|04:00.00) : 12D8 2308 class=060400
0:118  0:000  PCI (00|05:01.00) : 12D8 2308 class=060400
0:118  0:000  PCI (00|06:00.00) : 1B21 0625 class=010601
0:118  0:000  PCI (00|05:02.00) : 12D8 2308 class=060400
0:118  0:000  PCI (00|07:00.00) : 1B21 0625 class=010601
0:118  0:000  PCI (00|00:03.00) : 8086 340A class=060400
0:118  0:000  PCI (00|08:00.00) : 1002 67DF class=030000
0:118  0:000   - GFX: Model=AMD Radeon RX 480 (ATI/AMD)
0:118  0:000  PCI (00|08:00.01) : 1002 AAF0 class=040300
0:118  0:000   - HDMI Audio:
0:118  0:000  PCI (00|00:07.00) : 8086 340E class=060400
0:118  0:000  PCI (00|00:0D.00) : 8086 343A class=060000
0:118  0:000  PCI (00|00:0D.01) : 8086 343B class=060000
0:118  0:000  PCI (00|00:0D.02) : 8086 343C class=060000
0:118  0:000  PCI (00|00:0D.03) : 8086 343D class=060000
0:118  0:000  PCI (00|00:0D.04) : 8086 3418 class=060000
0:118  0:000  PCI (00|00:0D.05) : 8086 3419 class=060000
0:118  0:000  PCI (00|00:0D.06) : 8086 341A class=060000
0:118  0:000  PCI (00|00:0D.07) : 8086 341B class=060000
0:118  0:000  PCI (00|00:0E.00) : 8086 341C class=060000
0:118  0:000  PCI (00|00:0E.01) : 8086 341D class=060000
0:118  0:000  PCI (00|00:0E.02) : 8086 341E class=060000
0:118  0:000  PCI (00|00:0E.03) : 8086 341F class=060000
0:118  0:000  PCI (00|00:0E.04) : 8086 3439 class=060000
0:118  0:000  PCI (00|00:0F.00) : 8086 3424 class=110100
0:118  0:000  PCI (00|00:10.00) : 8086 3425 class=080000
0:118  0:000  PCI (00|00:10.01) : 8086 3426 class=080000
0:118  0:000  PCI (00|00:11.00) : 8086 3427 class=080000
0:118  0:000  PCI (00|00:11.01) : 8086 3428 class=080000
0:118  0:000  PCI (00|00:14.00) : 8086 342E class=080000
0:118  0:000  PCI (00|00:14.01) : 8086 3422 class=080000
0:118  0:000  PCI (00|00:14.02) : 8086 3423 class=080000
0:118  0:000  PCI (00|00:14.03) : 8086 3438 class=080000
0:118  0:000  PCI (00|00:15.00) : 8086 342F class=080020
0:118  0:000  PCI (00|00:16.00) : 8086 3430 class=088000
0:118  0:000  PCI (00|00:16.01) : 8086 3431 class=088000
0:118  0:000  PCI (00|00:16.02) : 8086 3432 class=088000
0:118  0:000  PCI (00|00:16.03) : 8086 3433 class=088000
0:118  0:000  PCI (00|00:16.04) : 8086 3429 class=088000
0:118  0:000  PCI (00|00:16.05) : 8086 342A class=088000
0:118  0:000  PCI (00|00:16.06) : 8086 342B class=088000
0:118  0:000  PCI (00|00:16.07) : 8086 342C class=088000
0:118  0:000  PCI (00|00:1A.00) : 8086 3A37 class=0C0300
0:118  0:000  PCI (00|00:1A.01) : 8086 3A38 class=0C0300
0:118  0:000  PCI (00|00:1A.02) : 8086 3A39 class=0C0300
0:118  0:000  PCI (00|00:1A.07) : 8086 3A3C class=0C0320
0:118  0:000  PCI (00|00:1B.00) : 8086 3A3E class=040300
0:118  0:000  PCI (00|00:1C.00) : 8086 3A40 class=060400
0:118  0:000  PCI (00|00:1C.01) : 8086 3A42 class=060400
0:119  0:000  PCI (00|00:1C.02) : 8086 3A44 class=060400
0:119  0:000  PCI (00|0C:00.00) : 8086 10F6 class=020000
0:119  0:000   - LAN: 0 Vendor=Intel
0:119  0:000  PCI (00|00:1C.03) : 8086 3A46 class=060400
0:119  0:000  PCI (00|0D:00.00) : 8086 10F6 class=020000
0:119  0:000   - LAN: 1 Vendor=Intel
0:119  0:000  PCI (00|00:1C.04) : 8086 3A48 class=060400
0:119  0:000  PCI (00|0E:00.00) : 104C 823E class=060400
0:119  0:000  PCI (00|0F:00.00) : 104C 823F class=0C0010
0:119  0:000  PCI (00|00:1C.05) : 8086 3A4A class=060400
0:119  0:000  PCI (00|10:00.00) : 14E4 432B class=028000
0:119  0:000   - WIFI: Vendor=Broadcom
0:119  0:000  PCI (00|00:1D.00) : 8086 3A34 class=0C0300
0:119  0:000  PCI (00|00:1D.01) : 8086 3A35 class=0C0300
0:119  0:000  PCI (00|00:1D.02) : 8086 3A36 class=0C0300
0:119  0:000  PCI (00|00:1D.07) : 8086 3A3A class=0C0320
0:119  0:000  PCI (00|00:1E.00) : 8086 244E class=060401
0:119  0:000  PCI (00|00:1F.00) : 8086 3A18 class=060100
0:119  0:000  PCI (00|00:1F.02) : 8086 3A22 class=010601
0:119  0:000  PCI (00|00:1F.03) : 8086 3A30 class=0C0500
0:119  0:000  PCI (00|00:1F.05) : 8086 3A26 class=010185
0:119  0:000  === [ GetDefaultSettings ] ================================
0:119  0:000  Clover load options size = 0 bytes
0:127  0:008  EFI\CLOVER\config.plist loaded: Success
0:179  0:051  === [ GetListOfThemes ] ===================================
0:183  0:004  - [00]: embedded
0:183  0:000  - [00]: random
0:187  0:004  - [00]: newyear
0:195  0:008  - [01]: christmas
0:203  0:008  === [ Found config plists ] ===============================
0:204  0:000  - Config.plist
0:204  0:000  === [ GetEarlyUserSettings ] ==============================
0:204  0:000  timeout set to 5
0:204  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:284  0:080  === [ LoadDrivers ] =======================================
1:428  1:143  Loading BiosVideo.efi  status=Success
1:514  0:086   - driver needs connecting
1:542  0:027  Loading ApfsDriverLoader-64.efi  status=Success
1:625  0:083   - driver needs connecting
1:653  0:027  Loading Fat-64.efi  status=Success
1:741  0:088   - driver needs connecting
1:768  0:027  Loading NvmExpressDxe-64.efi  status=Success
1:860  0:091   - driver needs connecting
1:887  0:027  Loading PartitionDxe-64.efi  status=Success
1:976  0:088   - driver needs connecting
2:003  0:027  Loading EmuGopDxe.efi  status=Success
2:092  0:088   - driver needs connecting
2:119  0:027  Loading UsbMassStorageDxe.efi  status=Success
2:209  0:089   - driver needs connecting
2:236  0:026  7 drivers needs connecting ...
2:264  0:028  PlatformDriverOverrideProtocol not found. Installing ... Success
2:319  0:054  Partition driver loaded: CD disconnect Success
2:401  0:082  APFS driver loaded
2:429  0:027  Video driver loaded: disconnect Success
2:513  0:084  Searching for invalid DiskIo BY_DRIVER connects:
2:571  0:057   - Handle 73277A18 with DiskIo, is Partition, no Fs, BY_DRIVER Agent: 72E0C918, Disconnect: Success
3:306  0:734  === [ InitScreen ] ========================================
4:459  1:152  Console modes reported: 1, available modes:
4:487  0:027   - [01]: 80x25 (current mode)
4:514  0:027  reinit: self device path=PciRoot(0x0)\Pci(0x1D,0x7)\USB(0x4,0x0)\HD(1,MBR,0x00000000,0x800,0x1DD5800)
4:542  0:028  Using embedded font: Success
4:570  0:027  === [ GetMacAddress ] =====================================
5:650  1:079  MAC address of LAN #0= Private
5:872  0:221  MAC address of LAN #1= Private
6:093  0:221  === [ ScanSPD ] ===========================================
7:333  1:239  SMBus device : 8086 3A30 class=0C0500 status=Success
7:360  0:027  SMBus CmdReg: 0x1
7:388  0:027  Scanning SMBus [8086:3A30], mmio: 0x90924004, ioport: 0x4000, hostc: 0x1
7:415  0:027  Slots to scan [8]...
7:445  0:029  === [ GetAcpiTablesList ] =================================
8:463  1:018  Get Acpi Tables List from RSDT:
8:516  0:052   - [00]: FACP  Apple00 len=244
8:544  0:027   - [01]: ECDT  Apple00 len=83
8:571  0:027   - [02]: HPET  Apple00 len=56
8:599  0:027   - [03]: APIC  Apple00 len=424
8:627  0:027   - [04]: SSDT  CpuPPM len=85884
8:654  0:027   - [05]: SSDT  SataAhci len=484
8:682  0:027   - [06]: SSDT  NoHdau len=1733
8:713  0:030   - [07]: MCFG  Apple00 len=60
8:738  0:025   - [08]: DMAR  Apple00 len=104
8:766  0:027  Calibrated TSC Frequency = 3457999569 = 3457MHz
8:794  0:027  === [ GetUserSettings ] ===================================
9:831  1:037  USB FixOwnership: no
9:859  0:027   - final DSDT Fix mask=00000000
9:886  0:027  Using ProductName from config: MacPro5,1
9:914  0:028  Found same BiosVersion in clover and config
9:941  0:027  BiosVersion: MP51.88Z.F000.B00.1809191555
9:969  0:027  BiosReleaseDate: 09/19/18
9:997  0:027  Using EfiVersion from config: 140.0.0.0.0
10:025  0:028  Using FirmwareFeatures from config: 0x17540CC0
10:052  0:027  Using FirmwareFeaturesMask from config: 0x3FFF1FFF
10:080  0:027  PlatformFeature will not set in SMBIOS
10:107  0:027  Board-ID set from config as Mac-F221BEC8
10:135  0:028  BoardType: 0xB
10:162  0:027  ChassisType: 0x7
10:190  0:027  QPI: use Table 132
10:221  0:030  === [ Found DSDT tables ] =================================
11:192  0:971  === [ ScanVolumes ] =======================================
12:324  1:131  Found 27 volumes with blockIO
12:361  0:037  - [00]: Volume: PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Pci(0x4,0x0)\Pci(0x0,0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)
12:424  0:062  - [01]: Volume: PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Pci(0x4,0x0)\Pci(0x0,0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(1,GPT,F5CC509D-EFF5-4D47-95DF-5466F14122D3,0x800,0x64000)
12:480  0:056          Result of bootcode detection: bootable unknown (legacy)
12:508  0:027  - [02]: Volume: PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Pci(0x4,0x0)\Pci(0x0,0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(2,GPT,9D9B9669-B225-4AD4-CD6D-1786E3E9F8AF,0x65000,0x8000)
12:565  0:056  - [03]: Volume: PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Pci(0x4,0x0)\Pci(0x0,0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(3,GPT,8431278A-5626-4061-0AF6-E40597D095D8,0x6D000,0xDE3E000)
12:621  0:056          Result of bootcode detection: bootable Windows (vista,win)
12:648  0:027  - [04]: Volume: PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Pci(0x4,0x0)\Pci(0x0,0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(4,GPT,9F0C3D7F-E8D5-4D40-6853-6EA48EA71B44,0xDEAB000,0xE8800)
12:706  0:057          Result of bootcode detection: bootable Windows (vista,win)
12:733  0:026  - [05]: Volume: PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Pci(0x4,0x0)\Pci(0x0,0x0)\Pci(0x2,0x0)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)
12:794  0:060  - [06]: Volume: PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Pci(0x4,0x0)\Pci(0x0,0x0)\Pci(0x2,0x0)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(1,GPT,DD79AD8B-BFA2-4E35-BAB9-C99D436B816E,0x28,0x64000)
12:849  0:055          Result of bootcode detection: bootable unknown (legacy)
12:877  0:027  - [07]: Volume: PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Pci(0x4,0x0)\Pci(0x0,0x0)\Pci(0x2,0x0)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(2,GPT,8C29C86F-7E0B-47C8-93AD-2D9D409DA583,0x64028,0x1BD8A540)
12:934  0:057  - [08]: Volume: PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Pci(0x4,0x0)\Pci(0x0,0x0)\Pci(0x2,0x0)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(3,GPT,4BF7E235-83E3-411F-92DC-844578DA24E5,0x1BDEE568,0x135F20)
12:990  0:055  - [09]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)
13:046  0:056  - [10]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)\HD(1,GPT,08C8A79A-9510-441B-BE7A-5B2ED808A16A,0x28,0x64000)
13:103  0:056          Result of bootcode detection: bootable unknown (legacy)
13:131  0:028  - [11]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)\HD(2,GPT,563C4384-827A-4A93-881C-5FBFB992E031,0x64028,0x246269960)
13:187  0:056  - [12]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0x0,0x0)
13:244  0:057  - [13]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0x0,0x0)\HD(1,GPT,5ACC50D0-A941-43B9-B2C0-B0C3967B0862,0x28,0x64000)
13:300  0:056          Result of bootcode detection: bootable unknown (legacy)
13:328  0:027  - [14]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0x0,0x0)\HD(2,GPT,4594F987-DBAD-4166-8B02-30C78AC924F1,0x64028,0x746A2D60)
13:384  0:056          Result of bootcode detection: bootable unknown (legacy)
13:412  0:027  - [15]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0)
13:469  0:056  - [16]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0)\HD(1,GPT,DFE554C1-20B9-4A2E-AA8E-12E30EAA3CF3,0x28,0x64000)
13:561  0:092          Result of bootcode detection: bootable unknown (legacy)
13:588  0:027  - [17]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0)\HD(2,GPT,3FDE4C70-3991-44F1-BB96-EDEB68A2EFB7,0x64800,0x8000)
13:645  0:056  - [18]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0)\HD(3,GPT,1B147299-1289-4445-A635-3A3C4533DFBE,0x6C800,0x1D05300D)
13:704  0:059          Result of bootcode detection: bootable Windows (vista,win)
13:730  0:025  - [19]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0)\HD(4,GPT,059C9C95-F981-41EC-B292-A669F7E58501,0x1D0C0000,0xE8800)
13:786  0:055          Result of bootcode detection: bootable Windows (vista,win)
13:813  0:027  - [20]: Volume: PciRoot(0x0)\Pci(0x1D,0x7)\USB(0x4,0x0)
13:871  0:057          USB volume
13:898  0:027  - [21]: Volume: PciRoot(0x0)\Pci(0x1D,0x7)\USB(0x4,0x0)\HD(1,MBR,0x00000000,0x800,0x1DD5800)
13:958  0:059          Result of bootcode detection: bootable unknown (legacy)
13:983  0:025          USB volume
14:011  0:027          This is SelfVolume !!
14:039  0:027  - [22]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)
14:094  0:055          Found optical drive
14:122  0:027  - [23]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0x0,0x0)\HD(2,GPT,4594F987-DBAD-4166-8B02-30C78AC924F1,0x64028,0x746A2D60)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,41D30E05471CDD448FC39DD446B06C03)
14:178  0:055  - [24]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0x0,0x0)\HD(2,GPT,4594F987-DBAD-4166-8B02-30C78AC924F1,0x64028,0x746A2D60)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,6240C61D76BBAB349D1702174E1CAC50)
14:234  0:055  - [25]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0x0,0x0)\HD(2,GPT,4594F987-DBAD-4166-8B02-30C78AC924F1,0x64028,0x746A2D60)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,D173968594D6574AB78522A943AD91C3)
14:289  0:055  - [26]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0x0,0x0)\HD(2,GPT,4594F987-DBAD-4166-8B02-30C78AC924F1,0x64028,0x746A2D60)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,8F018FFC8D587446B326B6D4971D7076)
14:345  0:055  === [ InitTheme ] =========================================
15:549  1:204  no default theme, get random theme newyear
15:576  0:027   using embedded theme
15:605  0:028  Using embedded font: Success
15:633  0:027  theme inited
15:660  0:027  Chosen embedded theme
15:688  0:027  after NVRAM boot-args=-v darkwake=no debug=0x100
15:718  0:030  === [ Dump SMC keys from NVRAM ] ==========================
16:491  0:772  found AppleSMC protocol
16:518  0:027  === [ ScanLoader ] ========================================
17:681  1:163  - [01]: 'EFI'
17:742  0:060          AddLoaderEntry for Volume Name=EFI
17:774  0:031          AddLoaderEntry for Volume Name=EFI
17:801  0:027          skipped because entry is hidden
17:829  0:027  - [06]: 'EFI'
17:909  0:079  - [07]: 'SierraSSD'
17:973  0:063          AddLoaderEntry for Volume Name=SierraSSD
18:005  0:031      Check if volume Is Hibernated:
18:032  0:027      Check sleep image 'by signature':
18:068  0:035      read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success
18:096  0:027      using default sleep image name = \private\var\vm\sleepimage
18:129  0:033      sleepimage not found -> Not Found
18:155  0:025      hibernated: no - sign
18:192  0:037  - [08]: 'Recovery HD'
18:260  0:068          AddLoaderEntry for Volume Name=Recovery HD
18:291  0:030  - [10]: 'EFI'
18:346  0:055  - [11]: 'Backup'
18:403  0:056  - [13]: 'EFI'
18:458  0:055  - [16]: 'EFI'
18:518  0:059          AddLoaderEntry for Volume Name=EFI
18:550  0:031          AddLoaderEntry for Volume Name=EFI
18:577  0:027          skipped because entry is hidden
18:605  0:027  - [21]: 'CLOVER'
18:661  0:056          AddLoaderEntry for Volume Name=CLOVER
18:689  0:027          skipped because entry is hidden
18:718  0:029  - [23]: 'Preboot'
18:779  0:061          AddLoaderEntry for Volume Name=Preboot
18:831  0:051      Check if volume Is Hibernated:
18:859  0:027      Check sleep image 'by signature':
18:887  0:027      using default sleep image name = \private\var\vm\sleepimage
18:915  0:028      sleepimage not found -> Not Found
18:942  0:027      hibernated: no - sign
18:973  0:030          AddLoaderEntry for Volume Name=Preboot
19:022  0:049  - [24]: 'Mojave'
19:294  0:271          AddLoaderEntry for Volume Name=Mojave
19:362  0:067      Check if volume Is Hibernated:
19:388  0:026      Check sleep image 'by signature':
19:551  0:162      read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success
19:577  0:025      using default sleep image name = \private\var\vm\sleepimage
19:645  0:068      sleepimage not found -> Not Found
19:672  0:026      hibernated: no - sign
19:708  0:036  - [25]: 'Recovery'
19:766  0:057          AddLoaderEntry for Volume Name=Recovery
19:811  0:045  - [26]: 'VM'
19:867  0:055  Scanning legacy ...
19:895  0:027   3: 'Legacy HD3' (vista,win) add legacy
19:950  0:055   added 'Boot Windows from Legacy HD3' OSType=2 Icon=vista,win
19:978  0:027   4: 'Legacy HD4' (vista,win) add legacy
20:033  0:055   added 'Boot Windows from Legacy HD4' OSType=2 Icon=vista,win
20:061  0:027  18: 'Legacy HD3' (vista,win) add legacy
20:116  0:055   added 'Boot Windows from Legacy HD3' OSType=2 Icon=vista,win
20:143  0:027  19: 'Legacy HD4' (vista,win) add legacy
20:200  0:056   added 'Boot Windows from Legacy HD4' OSType=2 Icon=vista,win
20:227  0:027  === [ AddCustomTool ] =====================================
21:311  1:083  found tool \EFI\CLOVER\tools\Shell64U.efi
21:338  0:027  Checking EFI partition Volume 1 for Clover
21:365  0:027  Checking EFI partition Volume 6 for Clover
21:393  0:027  Checking EFI partition Volume 10 for Clover
21:420  0:026  Checking EFI partition Volume 13 for Clover
21:447  0:027  Checking EFI partition Volume 16 for Clover
21:475  0:027  === [ GetEfiBootDeviceFromNvram ] =========================
22:239  0:764   - efi-boot-device-data: PciRoot(0x0)\Pci(0x1D,0x7)\USB(0x4,0x0)\HD(1,MBR,0x00000000,0x800,0x1DD5800)\EFI\BOOT\BOOTX64.efii
22:268  0:028    - Volume: 'PciRoot(0x0)\Pci(0x1D,0x7)\USB(0x4,0x0)\HD(1,MBR,0x00000000,0x800,0x1DD5800)'
22:295  0:027    - LoaderPath: '\EFI\BOOT\BOOTX64.efi'
22:323  0:027  === [ FindStartupDiskVolume ] =============================
23:183  0:860    - Volume: partition = PciRoot(0x0)\Pci(0x1D,0x7)\USB(0x4,0x0)\HD(1,MBR,0x00000000,0x800,0x1DD5800)
23:213  0:029     - searching for that partition and loader '\EFI\BOOT\BOOTX64.efi'
23:239  0:026      - [!] not found
23:267  0:027     - searching again, but comparing Media dev path nodes
23:295  0:027      - [!] not found
23:323  0:027     - searching for that partition
23:350  0:027      - [!] not found
23:379  0:028     - searching again, but comparing Media dev path nodes
23:406  0:027      - [!] not found
23:434  0:027  Default boot entry not found
23:462  0:027  DefaultIndex=-1 and MainMenu.EntryCount=17
23:491  0:029  GUI ready
277:962  254:470  ParseBootOption: invalid boot variable
277:989  0:027  BootVariable of the entry is empty
278:017  0:027  === [ StartLoader ] =======================================
279:166  1:149  Finally: ExternalClock=133MHz BusSpeed=133000kHz CPUFreq=3458MHz PIS: hw.busfrequency=532000000Hz
279:221  0:054  Loading bootmgfw.efi  status=Success
279:319  0:098  Closing events for Windows
279:346  0:027  OtherOS: Found Acpi 2.0 RSDP 0x775AE014
279:375  0:028  RSDT at 775AE0FC
279:402  0:027  XSDT at 775AE1C0
279:430  0:027  FADT pointer = 775AB000
279:465  0:035  Cleanup RSDT: count=9, length=72
279:491  0:026  corrected RSDT: count=9, length=72
279:518  0:027  Cleanup XSDT: count=9, length=108
279:546  0:027  corrected XSDT count=9, length=108
279:574  0:027  SetStartupDiskVolume:
279:602  0:027    * Volume: 'EFI'
279:630  0:027    * LoaderPath: '\EFI\microsoft\Boot\bootmgfw.efi'
279:659  0:029    * DevPath: EFI
279:685  0:026    * GUID = F5CC509D-EFF5-4D47-95DF-5466F14122D3
279:743  0:057    * efi-boot-device: <array><dict><key>IOMatch</key><dict><key>IOProviderClass</key><string>IOMedia</string><key>IOPropertyMatch</key><dict><key>UUID</key><string>F5CC509D-EFF5-4D47-95DF-5466F14122D3</string></dict></dict></dict></array>
279:834  0:091  Closing log
Booted with clover to a black screen and stayed there forever until I pressed enter. I saw activity on my USB drive and booted to my Windows partition (probably the current selected partition before I hit enter)
Nothing interesting in the log output, was that debug/true?

We should see:

Code:
=== [ InitScreen ] ========================================
3:572  0:719  SetScreenResolution: 1280x1024 - setting Mode 4
3:607  0:034  Video mode change to mode #4: Success
3:622  0:015  Console modes reported: 1, available modes:
3:639  0:016   - [01]: 80x25 (current mode)
3:655  0:016  SetScreenResolution: 1280x1024 - already set
 
Last edited:

startergo

macrumors 68020
Sep 20, 2018
2,227
895
Nothing interesting in the log output, was that debug/true?

We should see:

Code:
=== [ InitScreen ] ========================================
3:572  0:719  SetScreenResolution: 1280x1024 - setting Mode 4
3:607  0:034  Video mode change to mode #4: Success
3:622  0:015  Console modes reported: 1, available modes:
3:639  0:016   - [01]: 80x25 (current mode)
3:655  0:016  SetScreenResolution: 1280x1024 - already set
Yes the debug was true. Only the first part is the verbose output of the bless command after that is the debug output from the debug file. I have copied all the drivers from @abdyfranco next loader and it behaves exactly the same way, but it gives me the debug option. Maybe I can try other video drivers or load vbios and edid. I had selected orinoko frame buffer and Radeon DeInit for this test.
 
Last edited:

DearthnVader

macrumors 65816
Original poster
Dec 17, 2015
1,138
5,729
Red Springs, NC
Yes the debug was true. Only the first part is the verbose output of the bless command after that is the debug output from the debug file. I have copied all the drivers from @abdyfranco next loader and it behaves exactly the same way, but it gives me the debug option. Maybe I can try other video drivers or load vbios and edid. I had selected orinoko frame buffer and Radeon DeInit for this test.
It's really not telling us anything we don't already know, the GOP option rom gets loaded, and links, but our code doesn't work on the 5,1, and it doesn't get any modes for the connected display.

We're going to have to add some breakpoints with additional logging to find anything useful.

1. Jief's version of rEFInd works on the 3,1
2. Clover with EmuGOPDxe.efi works on the 3,1
3. NextLoader works on the 3,1

Somewhere in this code we are failing:

nEXt Loader:
Code:
// Screen handling
//

// Fetches all the available video modes from the GraphicsOutput module
// compatible with the GOP Graphics card.
VOID egDumpGOPVideoModes(VOID)
{
    EFI_STATUS  Status;
    UINT32      MaxMode;
    UINT32      Mode;
    UINTN       SizeOfInfo;
    EFI_GRAPHICS_OUTPUT_MODE_INFORMATION *Info;
    CHAR16      *PixelFormatDesc;

    if (GraphicsOutput == NULL) {
        return;
    }

    // get dump
    MaxMode = GraphicsOutput->Mode->MaxMode;
    Mode = GraphicsOutput->Mode->Mode;

    for (Mode = 0; Mode < MaxMode; Mode++) {
        Status = GraphicsOutput->QueryMode(GraphicsOutput, Mode, &SizeOfInfo, &Info);
        if (Status == EFI_SUCCESS) {

            switch (Info->PixelFormat) {
                case PixelRedGreenBlueReserved8BitPerColor:
                    PixelFormatDesc = L"8bit RGB";
                    break;

                case PixelBlueGreenRedReserved8BitPerColor:
                    PixelFormatDesc = L"8bit BGR";
                    break;

                case PixelBitMask:
                    PixelFormatDesc = L"BITMASK";
                    break;

                case PixelBltOnly:
                    PixelFormatDesc = L"NO FB";
                    break;

                default:
                    PixelFormatDesc = L"invalid";
                    break;
            }
        }
    }
rEFInd:

Code:
VOID egDumpGOPVideoModes(VOID)
{
    EFI_STATUS  Status;
    UINT32      MaxMode;
    UINT32      Mode;
    UINTN       SizeOfInfo;
    EFI_GRAPHICS_OUTPUT_MODE_INFORMATION *Info;
    CHAR16      *PixelFormatDesc;

    if (GraphicsOutput == NULL) {
        return;
    }

    // get dump
    MaxMode = GraphicsOutput->Mode->MaxMode;
    Mode = GraphicsOutput->Mode->Mode;
    MsgLog("Available graphics modes for refit.conf screen_resolution:\n");
    MsgLog("Curr. Mode = %d, Modes = %d, FB = %lx, FB size=0x%x\n",
           Mode, MaxMode, GraphicsOutput->Mode->FrameBufferBase, GraphicsOutput->Mode->FrameBufferSize);

    for (Mode = 0; Mode < MaxMode; Mode++) {
        Status = GraphicsOutput->QueryMode(GraphicsOutput, Mode, &SizeOfInfo, &Info);
        if (Status == EFI_SUCCESS) {

            switch (Info->PixelFormat) {
                case PixelRedGreenBlueReserved8BitPerColor:
                    PixelFormatDesc = L"8bit RGB";
                    break;

                case PixelBlueGreenRedReserved8BitPerColor:
                    PixelFormatDesc = L"8bit BGR";
                    break;

                case PixelBitMask:
                    PixelFormatDesc = L"BITMASK";
                    break;

                case PixelBltOnly:
                    PixelFormatDesc = L"NO FB";
                    break;

                default:
                    PixelFormatDesc = L"invalid";
                    break;
            }

            Print(L"- Mode %d: %dx%d PixFmt = %s, PixPerScanLine = %d\n",
                      Mode, Info->HorizontalResolution, Info->VerticalResolution, PixelFormatDesc, Info->PixelsPerScanLine);
        } else {
            MsgLog("- Mode %d: %r\n", Mode, Status);
        }
    }

}
Some relevant info can be found:

https://blog.fpmurphy.com/2015/05/check-available-text-and-graphics-modes-from-uefi-shell.html

I built this code once, and was able to get all the supported GOP modes for a GTX 1050 and a RX580 in an EFI Shell with OVMF.

Likely we could use the code to fix what we are doing wrong @abdyfranco ?
 
Last edited:
  • Like
Reactions: ActionableMango

startergo

macrumors 68020
Sep 20, 2018
2,227
895
Code:
0:100  0:100  MemLog inited, TSC freq: 3457999529
0:100  0:000  CPU was calibrated with ACPI PM Timer
0:100  0:000
0:100  0:000  Now is 10.11.2018,  13:56:54 (GMT)
0:100  0:000  Starting Clover revision: 4741 on Apple EFI
0:100  0:000  Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED -t XCODE8 | -D NO_GRUB_DRIVERS_EMBEDDED -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE8 -n 5 | OS: 10.12.6 | XCODE: 8.3.3]
0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x1D,0x7)\USB(0x4,0x0)\HD(1,MBR,0x00000000,0x800,0x1DD5800) @73AD8418
0:100  0:000  SelfDirPath = \EFI\BOOT
0:100  0:000  === [ Get Smbios ] ========================================
0:118  0:018  Type 16 Index = 0
0:118  0:000  Total Memory Slots Count = 8
0:118  0:000  Type 17 Index = 0
0:118  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:118  0:000  SmbiosTable.Type17->Size = 16384MB
0:118  0:000  SmbiosTable.Type17->Bank/Device =  DIMM 1
0:118  0:000  SmbiosTable.Type17->Vendor = 0x0000
0:118  0:000  SmbiosTable.Type17->SerialNumber = 0x00000000
0:118  0:000  SmbiosTable.Type17->PartNumber = 0x000000000000000000000000000000000000
0:118  0:000  Type 17 Index = 1
0:118  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:118  0:000  SmbiosTable.Type17->Size = 16384MB
0:118  0:000  SmbiosTable.Type17->Bank/Device =  DIMM 2
0:118  0:000  SmbiosTable.Type17->Vendor = 0x0000
0:118  0:000  SmbiosTable.Type17->SerialNumber = 0x00000000
0:118  0:000  SmbiosTable.Type17->PartNumber = 0x000000000000000000000000000000000000
0:118  0:000  Type 17 Index = 2
0:118  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:118  0:000  SmbiosTable.Type17->Size = 16384MB
0:118  0:000  SmbiosTable.Type17->Bank/Device =  DIMM 3
0:118  0:000  SmbiosTable.Type17->Vendor = 0x0000
0:118  0:000  SmbiosTable.Type17->SerialNumber = 0x00000000
0:118  0:000  SmbiosTable.Type17->PartNumber = 0x000000000000000000000000000000000000
0:118  0:000  Type 17 Index = 3
0:118  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:118  0:000  SmbiosTable.Type17->Size = 16384MB
0:118  0:000  SmbiosTable.Type17->Bank/Device =  DIMM 4
0:118  0:000  SmbiosTable.Type17->Vendor = 0x0000
0:118  0:000  SmbiosTable.Type17->SerialNumber = 0x00000000
0:118  0:000  SmbiosTable.Type17->PartNumber = 0x000000000000000000000000000000000000
0:118  0:000  Type 17 Index = 4
0:118  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:118  0:000  SmbiosTable.Type17->Size = 16384MB
0:118  0:000  SmbiosTable.Type17->Bank/Device =  DIMM 5
0:118  0:000  SmbiosTable.Type17->Vendor = 0x0000
0:118  0:000  SmbiosTable.Type17->SerialNumber = 0x00000000
0:118  0:000  SmbiosTable.Type17->PartNumber = 0x000000000000000000000000000000000000
0:118  0:000  Type 17 Index = 5
0:118  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:118  0:000  SmbiosTable.Type17->Size = 16384MB
0:118  0:000  SmbiosTable.Type17->Bank/Device =  DIMM 6
0:118  0:000  SmbiosTable.Type17->Vendor = 0x0000
0:118  0:000  SmbiosTable.Type17->SerialNumber = 0x00000000
0:118  0:000  SmbiosTable.Type17->PartNumber = 0x000000000000000000000000000000000000
0:118  0:000  Type 17 Index = 6
0:118  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:118  0:000  SmbiosTable.Type17->Size = 16384MB
0:118  0:000  SmbiosTable.Type17->Bank/Device =  DIMM 7
0:118  0:000  SmbiosTable.Type17->Vendor = 0x0000
0:118  0:000  SmbiosTable.Type17->SerialNumber = 0x00000000
0:118  0:000  SmbiosTable.Type17->PartNumber = 0x000000000000000000000000000000000000
0:118  0:000  Type 17 Index = 7
0:118  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:118  0:000  SmbiosTable.Type17->Size = 16384MB
0:118  0:000  SmbiosTable.Type17->Bank/Device =  DIMM 8
0:118  0:000  SmbiosTable.Type17->Vendor = 0x0000
0:118  0:000  SmbiosTable.Type17->SerialNumber = 0x00000000
0:118  0:000  SmbiosTable.Type17->PartNumber = 0x000000000000000000000000000000000000
0:118  0:000  Boot status=0
0:118  0:000  Running on: 'MacPro5,1' with board 'Mac-F221BEC8'
0:118  0:000  === [ GetCPUProperties ] ==================================
0:118  0:000  CPU Vendor = 756E6547 Model=206C2
0:118  0:000   The CPU supported SSE4.1
0:118  0:000  BrandString = Intel(R) Xeon(R) CPU           X5690  @ 3.47GHz
0:118  0:000   The CPU supported turbo
0:118  0:000  non-usable FLEX_RATIO = 13F00
0:118  0:000  FSBFrequency = 134 MHz, DMI FSBFrequency = 133 MHz, Corrected FSBFrequency = 133 MHz
0:118  0:000  MaxDiv/MinDiv: 26.0/12
0:118  0:000  Turbo: 27/27/28/28
0:118  0:000  Features: 0xBFEBFBFF
0:118  0:000  Threads: 12
0:118  0:000  Cores: 6
0:118  0:000  FSB: 133 MHz
0:118  0:000  CPU: 3460 MHz
0:118  0:000  TSC: 3460 MHz
0:118  0:000  PIS: 533 MHz
0:118  0:000  ExternalClock: 133 MHz
0:118  0:000  === [ GetDevices ] ========================================
0:118  0:000  PCI (00|00:00.00) : 8086 3406 class=060000
0:118  0:000  PCI (00|00:01.00) : 8086 3408 class=060400
0:118  0:000  PCI (00|01:00.00) : 111D 8061 class=060400
0:118  0:000  PCI (00|02:02.00) : 111D 8061 class=060400
0:118  0:000  PCI (00|02:04.00) : 111D 8061 class=060400
0:118  0:000  PCI (00|04:00.00) : 12D8 2308 class=060400
0:118  0:000  PCI (00|05:01.00) : 12D8 2308 class=060400
0:118  0:000  PCI (00|06:00.00) : 1B21 0625 class=010601
0:118  0:000  PCI (00|05:02.00) : 12D8 2308 class=060400
0:118  0:000  PCI (00|07:00.00) : 1B21 0625 class=010601
0:118  0:000  PCI (00|00:03.00) : 8086 340A class=060400
0:118  0:000  PCI (00|08:00.00) : 1002 67DF class=030000
0:118  0:000   - GFX: Model=AMD Radeon RX 480 (ATI/AMD)
0:118  0:000  PCI (00|08:00.01) : 1002 AAF0 class=040300
0:118  0:000   - HDMI Audio:
0:118  0:000  PCI (00|00:07.00) : 8086 340E class=060400
0:118  0:000  PCI (00|00:0D.00) : 8086 343A class=060000
0:118  0:000  PCI (00|00:0D.01) : 8086 343B class=060000
0:118  0:000  PCI (00|00:0D.02) : 8086 343C class=060000
0:118  0:000  PCI (00|00:0D.03) : 8086 343D class=060000
0:118  0:000  PCI (00|00:0D.04) : 8086 3418 class=060000
0:118  0:000  PCI (00|00:0D.05) : 8086 3419 class=060000
0:118  0:000  PCI (00|00:0D.06) : 8086 341A class=060000
0:118  0:000  PCI (00|00:0D.07) : 8086 341B class=060000
0:118  0:000  PCI (00|00:0E.00) : 8086 341C class=060000
0:118  0:000  PCI (00|00:0E.01) : 8086 341D class=060000
0:118  0:000  PCI (00|00:0E.02) : 8086 341E class=060000
0:118  0:000  PCI (00|00:0E.03) : 8086 341F class=060000
0:118  0:000  PCI (00|00:0E.04) : 8086 3439 class=060000
0:118  0:000  PCI (00|00:0F.00) : 8086 3424 class=110100
0:118  0:000  PCI (00|00:10.00) : 8086 3425 class=080000
0:118  0:000  PCI (00|00:10.01) : 8086 3426 class=080000
0:118  0:000  PCI (00|00:11.00) : 8086 3427 class=080000
0:118  0:000  PCI (00|00:11.01) : 8086 3428 class=080000
0:118  0:000  PCI (00|00:14.00) : 8086 342E class=080000
0:118  0:000  PCI (00|00:14.01) : 8086 3422 class=080000
0:118  0:000  PCI (00|00:14.02) : 8086 3423 class=080000
0:118  0:000  PCI (00|00:14.03) : 8086 3438 class=080000
0:118  0:000  PCI (00|00:15.00) : 8086 342F class=080020
0:118  0:000  PCI (00|00:16.00) : 8086 3430 class=088000
0:118  0:000  PCI (00|00:16.01) : 8086 3431 class=088000
0:118  0:000  PCI (00|00:16.02) : 8086 3432 class=088000
0:118  0:000  PCI (00|00:16.03) : 8086 3433 class=088000
0:118  0:000  PCI (00|00:16.04) : 8086 3429 class=088000
0:118  0:000  PCI (00|00:16.05) : 8086 342A class=088000
0:118  0:000  PCI (00|00:16.06) : 8086 342B class=088000
0:118  0:000  PCI (00|00:16.07) : 8086 342C class=088000
0:118  0:000  PCI (00|00:1A.00) : 8086 3A37 class=0C0300
0:118  0:000  PCI (00|00:1A.01) : 8086 3A38 class=0C0300
0:118  0:000  PCI (00|00:1A.02) : 8086 3A39 class=0C0300
0:119  0:000  PCI (00|00:1A.07) : 8086 3A3C class=0C0320
0:119  0:000  PCI (00|00:1B.00) : 8086 3A3E class=040300
0:119  0:000  PCI (00|00:1C.00) : 8086 3A40 class=060400
0:119  0:000  PCI (00|00:1C.01) : 8086 3A42 class=060400
0:119  0:000  PCI (00|00:1C.02) : 8086 3A44 class=060400
0:119  0:000  PCI (00|0C:00.00) : 8086 10F6 class=020000
0:119  0:000   - LAN: 0 Vendor=Intel
0:119  0:000  PCI (00|00:1C.03) : 8086 3A46 class=060400
0:119  0:000  PCI (00|0D:00.00) : 8086 10F6 class=020000
0:119  0:000   - LAN: 1 Vendor=Intel
0:119  0:000  PCI (00|00:1C.04) : 8086 3A48 class=060400
0:119  0:000  PCI (00|0E:00.00) : 104C 823E class=060400
0:119  0:000  PCI (00|0F:00.00) : 104C 823F class=0C0010
0:119  0:000  PCI (00|00:1C.05) : 8086 3A4A class=060400
0:119  0:000  PCI (00|10:00.00) : 14E4 432B class=028000
0:119  0:000   - WIFI: Vendor=Broadcom
0:119  0:000  PCI (00|00:1D.00) : 8086 3A34 class=0C0300
0:119  0:000  PCI (00|00:1D.01) : 8086 3A35 class=0C0300
0:119  0:000  PCI (00|00:1D.02) : 8086 3A36 class=0C0300
0:119  0:000  PCI (00|00:1D.07) : 8086 3A3A class=0C0320
0:119  0:000  PCI (00|00:1E.00) : 8086 244E class=060401
0:119  0:000  PCI (00|00:1F.00) : 8086 3A18 class=060100
0:119  0:000  PCI (00|00:1F.02) : 8086 3A22 class=010601
0:119  0:000  PCI (00|00:1F.03) : 8086 3A30 class=0C0500
0:119  0:000  PCI (00|00:1F.05) : 8086 3A26 class=010185
0:119  0:000  === [ GetDefaultSettings ] ================================
0:119  0:000  Clover load options size = 0 bytes
0:128  0:009  EFI\CLOVER\config.plist loaded: Success
0:180  0:051  === [ GetListOfThemes ] ===================================
0:184  0:004  - [00]: embedded
0:184  0:000  - [00]: random
0:189  0:004  - [00]: newyear
0:197  0:008  - [01]: christmas
0:205  0:008  === [ Found config plists ] ===============================
0:205  0:000  - Config.plist
0:205  0:000  === [ GetEarlyUserSettings ] ==============================
0:205  0:000  timeout set to 5
0:205  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:272  0:067   Custom EDID has wrong length=257
0:303  0:030  === [ LoadDrivers ] =======================================
1:448  1:144  Loading BiosVideo.efi  status=Success
1:536  0:087   - driver needs connecting
1:564  0:027  Loading ApfsDriverLoader-64.efi  status=Success
1:647  0:083   - driver needs connecting
1:675  0:027  Loading Fat-64.efi  status=Success
1:763  0:088   - driver needs connecting
1:790  0:027  Loading NvmExpressDxe-64.efi  status=Success
1:882  0:091   - driver needs connecting
1:910  0:027  Loading PartitionDxe-64.efi  status=Success
1:998  0:088   - driver needs connecting
2:026  0:027  Loading EmuGopDxe.efi  status=Success
2:117  0:091   - driver needs connecting
2:145  0:027  Loading FSInject-64.efi  status=Success
2:232  0:087  Loading UsbMassStorageDxe.efi  status=Success
2:348  0:115   - driver needs connecting
2:376  0:027  Loading CsmVideoDxe-64.efi  status=Success
2:459  0:083   - driver needs connecting
2:487  0:027  8 drivers needs connecting ...
2:514  0:027  PlatformDriverOverrideProtocol not found. Installing ... Success
2:570  0:055  Partition driver loaded: CD disconnect Success
2:653  0:082  APFS driver loaded
2:680  0:027  Video driver loaded: disconnect Success
2:764  0:083  Searching for invalid DiskIo BY_DRIVER connects:
2:822  0:057   - Handle 73277818 with DiskIo, is Partition, no Fs, BY_DRIVER Agent: 73231718, Disconnect: Success
3:504  0:681  === [ InitScreen ] ========================================
4:671  1:167  Console modes reported: 1, available modes:
4:698  0:026   - [01]: 80x25 (current mode)
4:727  0:028  reinit: self device path=PciRoot(0x0)\Pci(0x1D,0x7)\USB(0x4,0x0)\HD(1,MBR,0x00000000,0x800,0x1DD5800)
4:753  0:026  Using embedded font: Success
4:783  0:029  === [ GetMacAddress ] =====================================
5:890  1:107  MAC address of LAN #0= Private
6:111  0:220  MAC address of LAN #1= Private
6:332  0:221  === [ ScanSPD ] ===========================================
7:585  1:253  SMBus device : 8086 3A30 class=0C0500 status=Success
7:613  0:027  SMBus CmdReg: 0x1
7:641  0:027  Scanning SMBus [8086:3A30], mmio: 0x90924004, ioport: 0x4000, hostc: 0x1
7:668  0:027  Slots to scan [8]...
7:735  0:067  === [ GetAcpiTablesList ] =================================
8:778  1:042  Get Acpi Tables List from RSDT:
8:832  0:053   - [00]: FACP  Apple00 len=244
8:859  0:027   - [01]: ECDT  Apple00 len=83
8:887  0:027   - [02]: HPET  Apple00 len=56
8:915  0:027   - [03]: APIC  Apple00 len=424
8:943  0:027   - [04]: SSDT  CpuPPM len=85884
8:970  0:027   - [05]: SSDT  SataAhci len=484
8:998  0:027   - [06]: SSDT  NoHdau len=1733
9:025  0:027   - [07]: MCFG  Apple00 len=60
9:053  0:027   - [08]: DMAR  Apple00 len=104
9:081  0:027  Calibrated TSC Frequency = 3457999529 = 3457MHz
9:108  0:027  === [ GetUserSettings ] ===================================
10:129  1:020   Custom EDID has wrong length=257
10:165  0:036  USB FixOwnership: no
10:191  0:025   - final DSDT Fix mask=00000000
10:221  0:029  Using ProductName from config: MacPro5,1
10:247  0:026  Found same BiosVersion in clover and config
10:276  0:028  BiosVersion: MP51.88Z.F000.B00.1809191555
10:305  0:029  BiosReleaseDate: 09/19/18
10:332  0:026  Using EfiVersion from config: 140.0.0.0.0
10:358  0:026  Using FirmwareFeatures from config: 0x17540CC0
10:387  0:029  Using FirmwareFeaturesMask from config: 0x3FFF1FFF
10:413  0:026  PlatformFeature will not set in SMBIOS
10:442  0:028  Board-ID set from config as Mac-F221BEC8
10:468  0:026  BoardType: 0xB
10:498  0:029  ChassisType: 0x7
10:524  0:026  QPI: use Table 132
10:553  0:028  === [ Found DSDT tables ] =================================
11:523  0:970  === [ ScanVolumes ] =======================================
12:683  1:159  Found 27 volumes with blockIO
12:712  0:028  - [00]: Volume: PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Pci(0x4,0x0)\Pci(0x0,0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)
12:768  0:056  - [01]: Volume: PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Pci(0x4,0x0)\Pci(0x0,0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(1,GPT,F5CC509D-EFF5-4D47-95DF-5466F14122D3,0x800,0x64000)
12:824  0:056          Result of bootcode detection: bootable unknown (legacy)
12:850  0:025  - [02]: Volume: PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Pci(0x4,0x0)\Pci(0x0,0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(2,GPT,9D9B9669-B225-4AD4-CD6D-1786E3E9F8AF,0x65000,0x8000)
12:906  0:055  - [03]: Volume: PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Pci(0x4,0x0)\Pci(0x0,0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(3,GPT,8431278A-5626-4061-0AF6-E40597D095D8,0x6D000,0xDE3E000)
12:961  0:055          Result of bootcode detection: bootable Windows (vista,win)
13:000  0:039  - [04]: Volume: PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Pci(0x4,0x0)\Pci(0x0,0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(4,GPT,9F0C3D7F-E8D5-4D40-6853-6EA48EA71B44,0xDEAB000,0xE8800)
13:053  0:053          Result of bootcode detection: bootable Windows (vista,win)
13:081  0:027  - [05]: Volume: PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Pci(0x4,0x0)\Pci(0x0,0x0)\Pci(0x2,0x0)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)
13:143  0:061  - [06]: Volume: PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Pci(0x4,0x0)\Pci(0x0,0x0)\Pci(0x2,0x0)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(1,GPT,DD79AD8B-BFA2-4E35-BAB9-C99D436B816E,0x28,0x64000)
13:199  0:056          Result of bootcode detection: bootable unknown (legacy)
13:227  0:027  - [07]: Volume: PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Pci(0x4,0x0)\Pci(0x0,0x0)\Pci(0x2,0x0)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(2,GPT,8C29C86F-7E0B-47C8-93AD-2D9D409DA583,0x64028,0x1BD8A540)
13:284  0:057  - [08]: Volume: PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Pci(0x4,0x0)\Pci(0x0,0x0)\Pci(0x2,0x0)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(3,GPT,4BF7E235-83E3-411F-92DC-844578DA24E5,0x1BDEE568,0x135F20)
13:341  0:056  - [09]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)
13:397  0:056  - [10]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)\HD(1,GPT,08C8A79A-9510-441B-BE7A-5B2ED808A16A,0x28,0x64000)
13:453  0:056          Result of bootcode detection: bootable unknown (legacy)
13:481  0:027  - [11]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)\HD(2,GPT,563C4384-827A-4A93-881C-5FBFB992E031,0x64028,0x246269960)
13:538  0:056  - [12]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0x0,0x0)
13:594  0:056  - [13]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0x0,0x0)\HD(1,GPT,5ACC50D0-A941-43B9-B2C0-B0C3967B0862,0x28,0x64000)
13:650  0:056          Result of bootcode detection: bootable unknown (legacy)
13:678  0:027  - [14]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0x0,0x0)\HD(2,GPT,4594F987-DBAD-4166-8B02-30C78AC924F1,0x64028,0x746A2D60)
13:735  0:056          Result of bootcode detection: bootable unknown (legacy)
13:763  0:027  - [15]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0)
13:821  0:058  - [16]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0)\HD(1,GPT,DFE554C1-20B9-4A2E-AA8E-12E30EAA3CF3,0x28,0x64000)
13:876  0:054          Result of bootcode detection: bootable unknown (legacy)
13:904  0:027  - [17]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0)\HD(2,GPT,3FDE4C70-3991-44F1-BB96-EDEB68A2EFB7,0x64800,0x8000)
13:961  0:056  - [18]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0)\HD(3,GPT,1B147299-1289-4445-A635-3A3C4533DFBE,0x6C800,0x1D05300D)
14:018  0:056          Result of bootcode detection: bootable Windows (vista,win)
14:046  0:028  - [19]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0)\HD(4,GPT,059C9C95-F981-41EC-B292-A669F7E58501,0x1D0C0000,0xE8800)
14:103  0:056          Result of bootcode detection: bootable Windows (vista,win)
14:130  0:027  - [20]: Volume: PciRoot(0x0)\Pci(0x1D,0x7)\USB(0x4,0x0)
14:188  0:057          USB volume
14:216  0:027  - [21]: Volume: PciRoot(0x0)\Pci(0x1D,0x7)\USB(0x4,0x0)\HD(1,MBR,0x00000000,0x800,0x1DD5800)
14:275  0:059          Result of bootcode detection: bootable unknown (legacy)
14:303  0:027          USB volume
14:330  0:026          This is SelfVolume !!
14:357  0:027  - [22]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)
14:412  0:054          Found optical drive
14:439  0:026  - [23]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0x0,0x0)\HD(2,GPT,4594F987-DBAD-4166-8B02-30C78AC924F1,0x64028,0x746A2D60)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,41D30E05471CDD448FC39DD446B06C03)
14:525  0:085  - [24]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0x0,0x0)\HD(2,GPT,4594F987-DBAD-4166-8B02-30C78AC924F1,0x64028,0x746A2D60)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,6240C61D76BBAB349D1702174E1CAC50)
14:580  0:055  - [25]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0x0,0x0)\HD(2,GPT,4594F987-DBAD-4166-8B02-30C78AC924F1,0x64028,0x746A2D60)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,D173968594D6574AB78522A943AD91C3)
14:635  0:055  - [26]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0x0,0x0)\HD(2,GPT,4594F987-DBAD-4166-8B02-30C78AC924F1,0x64028,0x746A2D60)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,8F018FFC8D587446B326B6D4971D7076)
14:690  0:055  === [ InitTheme ] =========================================
15:885  1:194  no default theme, get random theme newyear
15:911  0:025   using embedded theme
15:941  0:029  Using embedded font: Success
15:967  0:026  theme inited
15:996  0:028  Chosen embedded theme
16:022  0:026  after NVRAM boot-args=-v darkwake=no debug=0x100
16:051  0:028  === [ Dump SMC keys from NVRAM ] ==========================
16:824  0:772  found AppleSMC protocol
16:850  0:026  === [ ScanLoader ] ========================================
18:037  1:187  - [01]: 'EFI'
18:098  0:060          AddLoaderEntry for Volume Name=EFI
18:128  0:030          AddLoaderEntry for Volume Name=EFI
18:157  0:028          skipped because entry is hidden
18:183  0:026  - [06]: 'EFI'
18:264  0:080  - [07]: 'SierraSSD'
18:329  0:065          AddLoaderEntry for Volume Name=SierraSSD
18:363  0:033      Check if volume Is Hibernated:
18:390  0:026      Check sleep image 'by signature':
18:426  0:036      read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success
18:453  0:026      using default sleep image name = \private\var\vm\sleepimage
18:488  0:035      sleepimage not found -> Not Found
18:514  0:026      hibernated: no - sign
18:544  0:029  - [08]: 'Recovery HD'
18:656  0:112          AddLoaderEntry for Volume Name=Recovery HD
18:685  0:028  - [10]: 'EFI'
18:740  0:055  - [11]: 'Backup'
18:798  0:058  - [13]: 'EFI'
18:861  0:062  - [16]: 'EFI'
18:921  0:060          AddLoaderEntry for Volume Name=EFI
18:953  0:031          AddLoaderEntry for Volume Name=EFI
18:981  0:028          skipped because entry is hidden
19:008  0:027  - [21]: 'CLOVER'
19:064  0:055          AddLoaderEntry for Volume Name=CLOVER
19:092  0:027          skipped because entry is hidden
19:119  0:027  - [23]: 'Preboot'
19:181  0:062          AddLoaderEntry for Volume Name=Preboot
19:226  0:044      Check if volume Is Hibernated:
19:253  0:027      Check sleep image 'by signature':
19:282  0:028      using default sleep image name = \private\var\vm\sleepimage
19:311  0:029      sleepimage not found -> Not Found
19:338  0:026      hibernated: no - sign
19:368  0:030          AddLoaderEntry for Volume Name=Preboot
19:417  0:049  - [24]: 'Mojave'
19:739  0:321          AddLoaderEntry for Volume Name=Mojave
19:816  0:077      Check if volume Is Hibernated:
19:843  0:026      Check sleep image 'by signature':
20:022  0:178      read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success
20:049  0:027      using default sleep image name = \private\var\vm\sleepimage
20:130  0:080      sleepimage not found -> Not Found
20:157  0:027      hibernated: no - sign
20:190  0:033  - [25]: 'Recovery'
20:249  0:059          AddLoaderEntry for Volume Name=Recovery
20:289  0:039  - [26]: 'VM'
20:345  0:055  Scanning legacy ...
20:373  0:027   3: 'Legacy HD3' (vista,win) add legacy
20:428  0:055   added 'Boot Windows from Legacy HD3' OSType=2 Icon=vista,win
20:456  0:027   4: 'Legacy HD4' (vista,win) add legacy
20:511  0:055   added 'Boot Windows from Legacy HD4' OSType=2 Icon=vista,win
20:539  0:027  18: 'Legacy HD3' (vista,win) add legacy
20:594  0:055   added 'Boot Windows from Legacy HD3' OSType=2 Icon=vista,win
20:622  0:027  19: 'Legacy HD4' (vista,win) add legacy
20:678  0:055   added 'Boot Windows from Legacy HD4' OSType=2 Icon=vista,win
20:705  0:027  === [ AddCustomTool ] =====================================
21:822  1:116  found tool \EFI\CLOVER\tools\Shell64U.efi
21:848  0:025  Checking EFI partition Volume 1 for Clover
21:877  0:028  Checking EFI partition Volume 6 for Clover
21:903  0:026  Checking EFI partition Volume 10 for Clover
21:932  0:029  Checking EFI partition Volume 13 for Clover
21:959  0:026  Checking EFI partition Volume 16 for Clover
21:989  0:029  === [ GetEfiBootDeviceFromNvram ] =========================
22:742  0:753   - efi-boot-device-data: PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Pci(0x4,0x0)\Pci(0x0,0x0)\Pci(0x2,0x0)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(3,GPT,4BF7E235-83E3-411F-92DC-844578DA24E5,0x1BDEE568,0x135F20)\com.apple.recovery.boot\boot.efii
22:769  0:027    - Volume: 'PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Pci(0x4,0x0)\Pci(0x0,0x0)\Pci(0x2,0x0)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(3,GPT,4BF7E235-83E3-411F-92DC-844578DA24E5,0x1BDEE568,0x135F20)'
22:799  0:030    - LoaderPath: '\com.apple.recovery.boot\boot.efi'
22:825  0:025    - Guid = 4BF7E235-83E3-411F-92DC-844578DA24E5
22:853  0:027  === [ FindStartupDiskVolume ] =============================
23:743  0:889    - Volume: partition = PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)\Pci(0x4,0x0)\Pci(0x0,0x0)\Pci(0x2,0x0)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(3,GPT,4BF7E235-83E3-411F-92DC-844578DA24E5,0x1BDEE568,0x135F20)
23:772  0:029     - searching for that partition and loader '\com.apple.recovery.boot\boot.efi'
23:801  0:029      - found entry 2. 'Boot Recovery from Recovery HD', Volume 'Recovery HD', '\com.apple.recovery.boot\boot.efi'
23:828  0:026  Boot redirected to Entry 2. 'Boot Recovery from Recovery HD'
23:854  0:026  DefaultIndex=2 and MainMenu.EntryCount=17
23:885  0:030  GUI ready
33:194  9:308  BootVariable of the entry is empty
33:220  0:026  === [ StartLoader ] =======================================
34:352  1:132  Finally: ExternalClock=133MHz BusSpeed=133000kHz CPUFreq=3458MHz PIS: hw.busfrequency=532000000Hz
34:417  0:065  Loading boot.efi  status=Success
34:524  0:106  GetOSVersion: 10.14 (18A389)
34:579  0:055  CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM
34:607  0:027  Will not patch boot.efi
34:635  0:027  === [ PatchSmbios ] =======================================
35:770  1:135  insert table 9 for dev 0:0
35:799  0:028  insert table 9 for dev 0:1
35:825  0:026  insert table 9 for dev 0:0
35:885  0:059  insert table 9 for dev 0:0
35:914  0:028  insert table 9 for dev 0:0
35:943  0:028  Trusting SMBIOS...
35:972  0:028  Detected alternating SMBIOS channel banks
35:998  0:026  Channels: 4
36:027  0:029  Interleave: 0 2 4 6 1 3 5 7 8 10 12 14 9 11 13 15 16 18 20 22 17 19 21 23
36:745  0:717   partNum=0x000000000000000000000000000000000000
36:771  0:026  SMBIOS Type 17 Index = 0 => 0 0:
36:802  0:030   DIMM1 1333MHz 16384MB
36:827  0:025   partNum=0x000000000000000000000000000000000000
36:856  0:028  SMBIOS Type 17 Index = 1 => 1 2:
36:882  0:026   DIMM2 1333MHz 16384MB
36:911  0:029   partNum=0x000000000000000000000000000000000000
36:938  0:026  SMBIOS Type 17 Index = 2 => 2 4:
36:967  0:029   DIMM3 1333MHz 16384MB
36:993  0:026   partNum=0x000000000000000000000000000000000000
37:022  0:028  SMBIOS Type 17 Index = 3 => 3 6:
37:049  0:026   DIMM4 1333MHz 16384MB
37:078  0:028   partNum=0x000000000000000000000000000000000000
37:104  0:026  SMBIOS Type 17 Index = 4 => 4 1:
37:133  0:029   DIMM5 1333MHz 16384MB
37:159  0:026   partNum=0x000000000000000000000000000000000000
37:188  0:028  SMBIOS Type 17 Index = 5 => 5 3:
37:214  0:025   DIMM6 1333MHz 16384MB
37:243  0:028   partNum=0x000000000000000000000000000000000000
37:268  0:025  SMBIOS Type 17 Index = 6 => 6 5:
37:306  0:037   DIMM7 1333MHz 16384MB
37:333  0:026   partNum=0x000000000000000000000000000000000000
37:361  0:027  SMBIOS Type 17 Index = 7 => 7 7:
37:389  0:027   DIMM8 1333MHz 16384MB
37:416  0:027  mTotalSystemMemory = 131072
37:444  0:027  NumberOfMemoryDevices = 8
37:471  0:027  Table 131 is present, CPUType=501
37:499  0:027  Change to: 501
37:526  0:027  Table 132 is present, QPI=1900
37:554  0:027  Change to: 0
37:581  0:027  === [ PatchACPI ] =========================================
38:803  1:221  Xsdt reallocation done
38:828  0:025  old FADT length=F4
38:857  0:028   SignatureFixup: 0xABACCABA -> 0x0
38:884  0:026  Output DSDT before patch to /EFI/CLOVER/ACPI/origin/DSDT-or.aml
39:058  0:174  Apply DsdtFixMask=0x00000000
39:085  0:027     drop _DSM mask=0xFFFF
39:114  0:028  === [ FixBiosDsdt ] =======================================
40:256  1:141  VideoCard devID=0x67DF1002
40:283  0:027  DisplayADR1[0] = 0x30000, DisplayADR2[0] = 0x0
40:314  0:030  USBADR[0] = 0x1A0000 and PCIe = 0xFFFE
40:340  0:025  USBADR[1] = 0x1A0001 and PCIe = 0xFFFE
40:367  0:027  USBADR[2] = 0x1A0002 and PCIe = 0xFFFE
40:395  0:027  USBADR[3] = 0x1A0007 and PCIe = 0xFFFE
40:423  0:027  Found Airport BCM at 0x1C0005, 0x0
40:450  0:027  USBADR[4] = 0x1D0000 and PCIe = 0xFFFE
40:478  0:027  USBADR[5] = 0x1D0001 and PCIe = 0xFFFE
40:505  0:027  USBADR[6] = 0x1D0002 and PCIe = 0xFFFE
40:533  0:027  USBADR[7] = 0x1D0007 and PCIe = 0xFFFE
40:560  0:027    0 replacements
40:588  0:027  first CPU found at 4E7 offset 4EA
40:615  0:027  score candidate at 4E3
40:643  0:027  score inserted in acpi_cpu_score _PR_
40:671  0:027  Found ACPI CPU: CPU0 | CPU1 | CPU2 | CPU3 | CPU4 | CPU5 | CPU6 | CPU7 | CPU8 | CPU9 | CPUA | CPUB | CPUC | CPUD | CPUE | CPUF | CPUG | CPUH | CPUI | CPUJ | CPUK | CPUL | CPUM | CPUN , within the score: _PR_
41:443  0:772  PreCleanup XSDT: count=9, length=108
41:471  0:027  PreCleanup XSDT, corrected XSDT: count=9, length=108
41:497  0:026  === [ ACPIDropTables ] ====================================
42:565  1:068    0 replacements
42:594  0:029    0 replacements
42:621  0:026    0 replacements
42:650  0:029  Out of control with CPU numbers
42:713  0:063  CPUBase=0 and ApicCPUBase=0 ApicCPUNum=12
42:742  0:029  Cleanup XSDT: count=9, length=108
42:768  0:026  corrected XSDT count=9, length=108
42:799  0:030  === [ RestSetup macOS ] ===================================
43:846  1:047      VendorID = 0x6666 changed to 0x1002
43:872  0:026      ProductID = 0x6666 changed to 0x67DF
43:901  0:029  Framebuffer @0x80000000  MMIO @0x90000000 I/O Port @0x00003000 ROM Addr @0x90640000
43:928  0:026  PCI region 1 = 0x00000000, region3 = 0x00000000, region5 = 0x90600000
43:957  0:028  Use region5 as MMIO space
43:983  0:026  BIOS_0_SCRATCH=0xFFFFFFFF, 1=0xFFFFFFFF, 2=0xFFFFFFFF, 3=0xFFFFFFFF, 4=0xFFFFFFFF, 5=0xFFFFFFFF, 6=0xFFFFFFFF
44:178  0:195  RADEON_CRTC2_GEN_CNTL == 0xFFFFFFFF
44:205  0:026   card not posted because GEN_CNTL = -1
44:234  0:029  ATI card non-POSTed,
44:290  0:056  Set VRAM for Ellesmere =4294967295Mb
44:315  0:024  ATI: get_vram_size returned 0xFFF00000
44:344  0:028  Found generic VBIOS ROM file (1002_67DF.rom)
44:376  0:032  Loaded ROM len=65536
44:404  0:027  Calculated ROM len=59904
44:429  0:025  VideoBIOS read from file
44:458  0:028  ATI Radeon EVERGREEN+ family
44:484  0:025  Users config name Orinoco
44:512  0:028  (AtiPorts) Nr of ports set to: 6
44:538  0:026  ATI Ellesmere AMD Radeon RX 480 -1MB (Orinoco) [1002:67DF] (subsys [1028:1701]):: PciRoot(0x0)\Pci(0x3,0x0)\Pci(0x0,0x0)
44:585  0:046  Device 0 deinited
44:612  0:026  stringlength = 124336
44:648  0:036  CurrentMode: Width=0 Height=0
44:674  0:026  Beginning FSInjection
44:704  0:029  skipping kext injection (not requested)
44:730  0:026  ** Warning: Your MLB is not suitable for iMessage(must be 17 chars long) !
44:759  0:029  Use origin smbios table type 1 guid.
44:791  0:032  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
44:818  0:026  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.14
44:844  0:026  SetStartupDiskVolume:
44:873  0:029    * Volume: 'Mojave'
44:900  0:026    * LoaderPath: '<null string>'
44:929  0:029    * DevPath: Mojave
44:955  0:026    * GUID = 4594F987-DBAD-4166-8B02-30C78AC924F1
45:012  0:056    * efi-boot-device: <array><dict><key>IOMatch</key><dict><key>IOProviderClass</key><string>IOMedia</string><key>IOPropertyMatch</key><dict><key>UUID</key><string>4594F987-DBAD-4166-8B02-30C78AC924F1</string></dict></dict></dict></array>
45:068  0:055  Custom boot screen not used because entry has unset use graphics
45:094  0:026  Closing log
Another try with injected EDID and loaded vbios. Still black screen selected (blindly Mojave for boot)
One thing I noticed is that Clover installed driver for the HDMI:
Edit:
My bad. The network HDMI driver was always installed .got too much excited. :)
Code:
pci14e4,432b:

  Type:    Other Network Controller
  Driver Installed:    Yes
  MSI:    Yes
  Bus:    PCI
  Slot:    HDMI port
  Vendor ID:    0x14e4
  Device ID:    0x432b
  Subsystem Vendor ID:    0x106b
  Subsystem ID:    0x008e
  Revision ID:    0x0001
  Link Width:    x1
  Link Speed:    2.5 GT/s
 
Last edited:

DearthnVader

macrumors 65816
Original poster
Dec 17, 2015
1,138
5,729
Red Springs, NC
I posted this in the other thread, but I've moved back to rEFInd builds due to reports that Clover was corrupting nvram on the 5,1.

I took some time and compiled some code to see if we can get a dump of the screen modes for a display connected to an AMD RX card in the 5,1. I don't own a 5,1 so I can't really test things, but the results I've seen from the drivers command from a shell seems to indicate that the AMD GOP driver loads and detects a display, tho rEFInd doesn't get any modes for that display when it probes.

I'd like someone with a 5,1 to boot a shell and run this program( ScreenModes ) to see if we can detect the display.

Here is the output I get from it, with the AMD GOP Driver in the same state it seems to be in on the 5,1:

Code:
o ConsoleControl handle found via HandleProtocol
Found ConsoleControl handle via LocateProtocol
Screen mode: Text
Graphics Support Avalaiable: Yes

Found 1 ConsoleControl handles via LocateHandleBuffer
Screen mode: Text
Graphics Support Avalaiable: Yes


No UGA handle found via HandleProtocol
Found UGA handle via LocateProtocol
Horizontal Resolution: 1360
Vertical Resolution: 768
Color Depth: 32
Refresh Rate: 60

Found 3 UGA handles via LocateHandleBuffer
Horizontal Resolution: 1360
Vertical Resolution: 768
Color Depth: 32
Refresh Rate: 60

Horizontal Resolution: 640
Vertical Resolution: 480
Color Depth: 32
Refresh Rate: 60

Horizontal Resolution: 1360
Vertical Resolution: 768
Color Depth: 32
Refresh Rate: 60


No GOP handle found via HandleProtocol
Found GOP handle via LocateProtocol
GOP reports MaxMode 5
 0: 1280x1024 BGRReserved Pixels 1280
 1: 640x480 BGRReserved Pixels 640
 2: 800x600 BGRReserved Pixels 832
 3: 1024x768 BGRReserved Pixels 1024
 4: 1280x960 BGRReserved Pixels 1280

Found 1 GOP handles via LocateHandleBuffer
GOP reports MaxMode 5
 0: 1280x1024 BGRReserved Pixels 1280
 1: 640x480 BGRReserved Pixels 640
 2: 800x600 BGRReserved Pixels 832
 3: 1024x768 BGRReserved Pixels 1024
 4: 1280x960 BGRReserved Pixels 1280
It finds both the UGA Radeon card, and the RX580, and both displays connected.

Usage:

From a shell:

Code:
screenmodes -v > modes.txt
 

Attachments

  • Like
Reactions: h9826790

watkipet

macrumors newbie
Aug 11, 2018
25
16
I'd like someone with a 5,1 to boot a shell and run this program( ScreenModes ) to see if we can detect the display.

Usage:

From a shell:

Code:
screenmodes -v > modes.txt
I tried this, however I'm running next-loadeder, not rEFInd, so I'm not sure how valid my results are. I ran Screenmodes.efi from my APFS partition. The first time I ran it, I could redirect the output to a file on the same partition. On subsequent times, the output file is there while I'm in the shell session, but when I reboot into macOS, the file disappears. Anyone happen to know if this is expected? Should I not be attempting to write to APFS from an EFI shell?
 

startergo

macrumors 68020
Sep 20, 2018
2,227
895
I tried this, however I'm running next-loadeder, not rEFInd, so I'm not sure how valid my results are. I ran Screenmodes.efi from my APFS partition. The first time I ran it, I could redirect the output to a file on the same partition. On subsequent times, the output file is there while I'm in the shell session, but when I reboot into macOS, the file disappears. Anyone happen to know if this is expected? Should I not be attempting to write to APFS from an EFI shell?
I always write it to the fat partition (EFI). I don't think it works on the APFS. The good thing is that all EFI partitions are mounted you just need to browse to it i.e. fs0:, fs1:... etc
 

watkipet

macrumors newbie
Aug 11, 2018
25
16
Never tried to write to APFS from the shell, better to just use FAT32 volumes.

OK. I finally got a chance to try this. I put it on a FAT32 thumb drive.

So, my output on a 4,1 flashed to a 5,1 from the EFI shell is pretty much the same as yours. I have an NVIDIA GeForce 120 and a Sapphire Pulse Radeon RX 580.
 

Attachments

  • Like
Reactions: h9826790

DearthnVader

macrumors 65816
Original poster
Dec 17, 2015
1,138
5,729
Red Springs, NC
OK. I finally got a chance to try this. I put it on a FAT32 thumb drive.

So, my output on a 4,1 flashed to a 5,1 from the EFI shell is pretty much the same as yours. I have an NVIDIA GeForce 120 and a Sapphire Pulse Radeon RX 580.
Interesting findings, looks as if things should be working with rEFInd, but we know they don't on the 5,1.......
 
  • Like
Reactions: h9826790

RetroDan

macrumors member
Dec 17, 2015
73
37
Michigan
Would like to know if there's any movement on this. I'm quite fond of rEFInd, but I'd like to remove the GT120 from my cMP so that I can use my RX580 as my sole graphics card - it's quite a tight fit in there with both of them.
 

startergo

macrumors 68020
Sep 20, 2018
2,227
895
Would like to know if there's any movement on this. I'm quite fond of rEFInd, but I'd like to remove the GT120 from my cMP so that I can use my RX580 as my sole graphics card - it's quite a tight fit in there with both of them.
Well nowadays GT-120 is replaced by GT640 or GT 740, this is what works with Mojave... Single slot
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.