Heat Readings

Discussion in 'Macintosh Computers' started by Darbydoggy, Aug 31, 2004.

  1. Darbydoggy macrumors newbie

    Aug 29, 2004
    Anyone usind the Temperature Monitor freeware? Could you please post your readings for your powerbook? I am interested in using the plug in power cord and the energy settings set at highest performance. What is your powerbook specs and what was open or working at the time of the temp readings?

  2. vraxtus macrumors 65816


    Aug 4, 2004
    San Francisco, CA
    About 135 F° at automatic settings, type in sig.
  3. comictimes macrumors 6502a


    Jun 20, 2004
    Berkeley, California
    with the poswer plugged in and processor at highest, I'm getting 95.0F for the battery, 124 for the processor bottomside, and 129.7 for the power supply bottomside.

    wow that's hot...
  4. LeeTom macrumors 68000


    May 31, 2004
    Okay, here is my 1.25GHz Powerbook, been on since this morning with the lid closed, connected to a Cinema Display:

    107.6F/42.0C Battery
    141.8F/61.0C Processor Bottomside
    143.6F/62.0C Processor/Controller Bottomside
    145.8F/63.2C Power Supply Bottomside
    114.8F/46.0C SMART Disk FUJITSU MHT208...

    Lee Tom
  5. Darbydoggy thread starter macrumors newbie

    Aug 29, 2004
    Well, for tonight I've got Batt 105.8, Processor Bottomside 128.8, Processor / Controller Bottomside 130.6, Power Supply Bottomside 134.6.

    The reason I asked is my PB felt pretty hot today and I was getting the highest readings at around 141 to 142 F.

    I just wanted to check in on what others are seeing so I can tell if the heat is way out of line or just normal for this compact computer. Also, the case is the heat sink, so it must get hot.

    All the above are with processor highest performance with 2 or 3 things going on at once.

    PB 15" 1.5 Ghz 128vid 5400rpm 1.5 gig ram.

Share This Page