Dayofthunder84

macrumors newbie
Original poster
Nov 2, 2019
5
2
Hello everyone,
On my Mac Pro 2009 4.1> 5.1,I was under High Sierra 10.13.6 and Sapphire RX580 Pulse graphics card, everything worked fine. I made the update following the recommendations of Dosdude. I went under Mojave. My RX580 does not display anything whatever the output used. I had to put a GT120 to have the display. I realized a clean install of Catalina (bootRom 144.0.0.0) following the method of Dosdude. Same, RX580 does not display anything. Everything works with the GT120. How to run the RX580 with Catalina? The recovery mode is not accessible anymore.

With the GT120 + RX580, no display via the RX580, only by the GT120. RX580 connected on the slot pci 1

I'm French, sorry for my english. Thanks for your help.
 

Attachments

  • Capture d’écran 2019-11-02 à 17.17.42.png
    Capture d’écran 2019-11-02 à 17.17.42.png
    838.3 KB · Views: 414
  • Capture d’écran 2019-11-02 à 17.22.07.png
    Capture d’écran 2019-11-02 à 17.22.07.png
    247.9 KB · Views: 166

IowaLynn

Contributor
Feb 22, 2015
2,048
544
Places I found that might help:


Wiki: https://forums.macrumors.com/thread...to-make-catalina-work-with-macpro5-1.2183978/

Mac Pro area: https://forums.macrumors.com/forums/mac-pro.1/
 
Comment

StellarVixen

macrumors 68020
Mar 1, 2018
2,459
3,986
Earth
I solved this by using InjectATI and specifying framebuffer as Orinocco, with number or ports set as 5.
 
Comment

Dayofthunder84

macrumors newbie
Original poster
Nov 2, 2019
5
2
Thanks, but my Mac refuse to access boot recovery and I can't SIP Disable.. How integrate InjectATI and Onirico?
 
Comment

sines

macrumors newbie
Apr 4, 2014
4
0
Sorry to resurrect this thread, but I'm also in the same boat. Upgraded 4,1>5,1 Mac Pro with 96GB of RAM.

I swear I had it working back in October, as a compute GPU for Resolve, but I am getting nothing from the Sapphire Pulse RX 580. No fans, no image, and nothing in the system profiler. It doesn't matter which slot I move it to, it won't appear. Using this cable from Amazon.
 

Attachments

  • Screen Shot 2021-02-21 at 4.59.08 PM.png
    Screen Shot 2021-02-21 at 4.59.08 PM.png
    88.9 KB · Views: 24
  • IMG_9317.JPG
    IMG_9317.JPG
    423.6 KB · Views: 22
Comment

saudor

macrumors 6502a
Jul 18, 2011
969
929
Sorry to resurrect this thread, but I'm also in the same boat. Upgraded 4,1>5,1 Mac Pro with 96GB of RAM.

I swear I had it working back in October, as a compute GPU for Resolve, but I am getting nothing from the Sapphire Pulse RX 580. No fans, no image, and nothing in the system profiler. It doesn't matter which slot I move it to, it won't appear. Using this cable from Amazon.
the current method is to use opencore.

Also why is your GPU wrapped up like that? the rx580 produces a ton of heat so that's really bad if it's not a temporary thing
 
Comment

sines

macrumors newbie
Apr 4, 2014
4
0
I thought I blessed the drive for install with Dosdude's Catalina patcher. But then did the Opencore patcher so that I could get my 12 [dual 6]-core 3.46 tray to work. I don't think I fully blessed the drive because the EFI still said "Updates on" and never fixed it.

PS: The GPU was wedged temporarily in bubblewrap.
 
Comment
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.