Toggle sidebar Toggle sidebar
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

MacBook Pro 15" Early 2011 won't boot but tries to power up. Fans start then stop, light on front fl

A

arkade

macrumors newbie
Original poster
MacBook Pro 15" Early 2011
2.2GHz i7
8GB RAM
AMD GPU

Battery expanded massively so I replaced it and at the same time added an SSD and moved the original HDD into DVD bay.

Installed MacOS Sierra onto SSD and booted and worked as usual.

Had some install issues getting Bootcamp to play nice but eventually got Windows 8.1 working fine (minus audio) on the HDD.

Was installing and copying files while on windows. When I went back to it appeared off, though I guess it could have been sleeping due to whatever settings Windows defaulted.

Now when I try to power on the fans spin up for a very short time then stop. The front status light flashes once. Nothing on screen.

It seems like the macbook is purposely cutting the power.

I am aware of AMD GPU issues with this machine, how can I know for sure if it is or is not that...there had ben no gfx glitches leading up to this.

I obviously can't reset the NVRAM as it doesn't power on properly.

Have tried removing the battery and SMC reset. No change.

Have tried removing battery and forcing power cycle by holding power 10 secs, inserting power cable, continuing to hold power button another 10 secs then releasing. It doesn't try to power on until i release the button, as you would expect, however it only manages to keep the fans going an extra second at most.

Have changed the power board to no effect.

With any combination of battery and cable plugged in/out it does the same thing.

Anyone wise enough to help me tackle this?

Thank you for your help.
 
It definitely doesn't sound like the same symptoms I got when my 2011 died, but regardless, if not now your GPU would kill it soon anyway.

When my GPU died though, I could get into Safe Mode and Apple Hardware Diagnostics no problem
 
arkade said:
It's sad that there is no one who thinks they know the problem 🙁
Click to expand...


If he's not busy you can try and write or phone Louis Rossman. He'll most certainly know what part is broken. You can also take a multimeter to all the components and compare them to reference voltages.
 
arkade said:
He'll definitely say its a current sensor and/or resistor...
Click to expand...


With his experience fixing these things what he says will most likely be true - and he won't just say it's a resistor. He'll tell you exactly which ones to look out for and measure.
 
Thanks for your responses. I know which ones would be the culprit if that were the case...but I would like to hear from anyone else who has had these symptoms.
 
You must log in or register to reply here.
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.
Top Bottom
Back