Will the Speck ToughSkin for the iPhone 4/4S fit in the Dock-in-Case nicely?

Discussion in 'iPhone Accessories' started by jpiszcz, Dec 6, 2011.

  1. jpiszcz macrumors regular

    Joined:
    Mar 28, 2010
    #1
    Hi,

    This case:
    http://store.apple.com/us/product/H7650ZM/A
    Height: 1.5 cm
    Width: 6.5 cm
    Weight: 50 g
    Length: 12.5 cm

    This dock:
    http://made2dock.myshopify.com/products/dock-in-case-iphone-4
    Pocket Sizes
    Bumper - 11.95mm x 65.85mm (0.470" x 2.592")
    Slim - 13.70mm x 66.90mm (0.539" x 2.633")
    Thick - 15.50mm x 69.40mm (0.610" x 2.732")

    So it needs at least 65mm width and 15mm height. The Thick would work, but then there is 4.40mm total length on each side of the case, which makes one wonder if this would add more stress onto the connector?

    Thoughts--has anyone docked a Speck ToughSkin for the iPhone 4/4S with one of these docks?
     
  2. jpiszcz thread starter macrumors regular

    Joined:
    Mar 28, 2010
    #2
    Hi,

    I have an update-- first I'd like to say the dock itself is a well polished product, it is heavy and stays on the desk quite well. I'd recommend it if you have a smaller case or a case marked as supported on made2dock's website.

    For the Speck ToughSkin for the iPhone 4/4S however, the bottom-backing is too thick for the largest, over-sized dock, it only docks if you take the thick rubber casing off, leaving the plastic casing on. You cannot dock the phone with the complete ToughSkin on. If you buy this iPhone 4/4S case, be aware this is virtually no dock that will fit this case.

    Justin.
     

    Attached Files:

    • d1.jpg
      d1.jpg
      File size:
      45.6 KB
      Views:
      38
    • d2.jpg
      d2.jpg
      File size:
      80.8 KB
      Views:
      31
    • d3.jpg
      d3.jpg
      File size:
      52.3 KB
      Views:
      34

Share This Page