Got a tip for us?
Let us know
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
New 17" TiPowerbooks, any issues?
- Thread starter Luigi
- Start date
- Sort by reaction score
NavyIntel007
macrumors 65816
Over Achiever
macrumors 68000
I have no major issues.
I have also heard of a CD ejecting issue over on MacNN, but it seemed to only be a particular brand of CD, Fujifilm or something. I personally have had no problems with the ejection mechanism.
And yes, technically you aren't supposed to call them tibooks anymore since they aren't made from titanium. 😉
As an early adopter, I was fully prepared for any first rev. issues, but have been pleasantly surprised that there are none.
I have also heard of a CD ejecting issue over on MacNN, but it seemed to only be a particular brand of CD, Fujifilm or something. I personally have had no problems with the ejection mechanism.
And yes, technically you aren't supposed to call them tibooks anymore since they aren't made from titanium. 😉
As an early adopter, I was fully prepared for any first rev. issues, but have been pleasantly surprised that there are none.
I also have had no issues arise that I'm concerned about. It really is a beautiful machine, and it has worked great so far. The added bonus is the jaws that hit the floor when I pull my Powerbook out.
Philinator
Philinator
17" name
You are correct, it is aluminum. I am so use to calling the Powerbook a Ti Powerbook.
The machine I am upgrading from is a 15" TiPowerbook. I love the screen size but I will be working on some video editing in the next few weeks and I wanted to upgrade to the 17".
I will try to sell my 15" TiPB before the "supposedly" 15" AlPB comes out. Anyone has ideas if the 15" AlPB will come out?
Regads,
Luigi
You are correct, it is aluminum. I am so use to calling the Powerbook a Ti Powerbook.
The machine I am upgrading from is a 15" TiPowerbook. I love the screen size but I will be working on some video editing in the next few weeks and I wanted to upgrade to the 17".
I will try to sell my 15" TiPB before the "supposedly" 15" AlPB comes out. Anyone has ideas if the 15" AlPB will come out?
Regads,
Luigi
Anyone found that the aluminum is hard as hell to scratch? I type with my watch on all the time, and my only mark on the entire machine is from a USB adapter a dropped from about 4 feet up.
There was a very good and comprehensive review of the new 17AlPowerbook on www.powerbookcentral.com. Personally I have had my 17PB for about 3 weeks now and it does not cease to AMAZE me. I performed some video editing on it the past couple of days and the color resloution and screen real estate is wonderful. The Superdrive is an added bonus and the 3D graphics for gaming is far better than I expected. This is the best portable computer in the market right now. I am enjoying it🙂
The Only Issue I have had with my new 17" is that either side of the screen, the metal is not finished perfectly, and has a sharp edge, that leaves marks at the edge, infront of the keyboard when it is closed. The marks do rub off, but if you were to leave it unprotected for too long, I'm sure it would be permanent.
It's fine when it's just closed normally, it only happens when I put it into it's sleeve in another bag, where it gets squeezed a little.
No biggie though, just got to find a couple of bobbles to stick on somewhere.
It's fine when it's just closed normally, it only happens when I put it into it's sleeve in another bag, where it gets squeezed a little.
No biggie though, just got to find a couple of bobbles to stick on somewhere.
Same here PedroKr. My marks appear on the side edge of the left handrest, but I have ordered some RadTech clear bumpers and will post as soon as they arrive at
http://homepage.mac.com/bhardy3/PhotoAlbum34.html
to let everyone know how they work. Meanwhile a simple sheet of paper cut to size solves the problem just as it did with my old 667 DVI.
http://homepage.mac.com/bhardy3/PhotoAlbum34.html
to let everyone know how they work. Meanwhile a simple sheet of paper cut to size solves the problem just as it did with my old 667 DVI.
Radtech is the BOMB!!!!!!!!!!! I orded the 17 SleeVZPower cover and the keyboard and LCD screensavRX. They are Great looking. Here is some Photos!!!!!!!!!!!!!
I just posted some temporary pics on my webpage until I can go to my brightly lit job and get better pics. You will see the LCD frame cushions from Radtech.com attached to my 17". They seem to be working as far as opening and closing the 17" but I must do some transporting to see if the marks from the LCD return on the edge of the hand rest. I do feel a sharp, protruding edge on the left edge of the LCD frame. Apple should have de-burred the LCD frame before assembly. To be fair Radtech does not have the 17" cushions out yet. These cushions are for the Ti or the iBook.
http://homepage.mac.com/bhardy3/PhotoAlbum34.html
I would have preferred the cushions to be smaller, firmer and dome-like, but thats just me I guess. Maybe this will be the type Radtech supplies in the future for the 17"
http://homepage.mac.com/bhardy3/PhotoAlbum34.html
I would have preferred the cushions to be smaller, firmer and dome-like, but thats just me I guess. Maybe this will be the type Radtech supplies in the future for the 17"
mgargan1
macrumors 65816
I don't like how i keep hitting the caps lock button instead of the "a" button. I don't like how right before the speakers are about to go on, they make a slight noise, and I don't like how I don't really feel that comfortable in OSX, but i'm getting there, and I know that the latter is my problem, not the machines... but other than that, it's a great machine. I love the way the keyboard feels when i type... very very nice feel to it.
