|
|
#1 |
|
Hi guys,
I updated my iphone version. 1.0.2 to a 1.1.1 and attempted a jailbreak.... my phone entered revovery mode then then loaded as normal but now it begins to load then the little loading icon appears at the bottom the who screen flashes then the phone restarts and does the same process over and over again... untill you hold the power + home button it turns off completely... I would like to know if it is possible to either: Load the phone in recovery mode once more and atempt to restore it then boot as normal later. OR If i should leave it to drain the battery then place it on charge to see what happens? OR Any other useful suggestion would be welcome Steve I really do need this help as I have a presentation to give on iphone to the company I work for, and my main point was its UI and Usability which ovbiously i cannot give unless i can get this working by friday... |
|
|
|
0
|
|
|
#2 | |
|
Quote:
|
||
|
|
0
|
|
|
#3 |
|
Hey...
I tried doing a restore through itunes and to no luck "unknown error(1)" however i tried ibrickr and asked it to downgrade my firmware back to 1.0.2... at least ill know it will be in a good working state - how wrong could I be... it seems its downgrade but the flashing and not starting issue is still here : ( - I dont want to jynx myself but could this mean my phone may well be Br*cked?? Steve btw thank you for replying so quickly
|
|
|
|
0
|
|
|
#4 |
|
Ok first of all, you are not supposed to downgrade back to 1.0.2.
Here are some simple steps to follow: 1. Restart your Computer and if possible your iPhone 2. Connect iPhone to iTunes. 3. Restore using iTunes back to 1.1.1. 4. That should about do it. == If trouble still spurs just post and I'll give more help == iPhone modding is not for the faint of heart iPhone 8GB - $399 Mac Book Pro - $2199 iPod 4th G - $299 No more fatal error or blue screen of Death - Priceless
|
|
|
|
0
|
|
|
#5 |
|
HI,
So my screen problem is gone now, my phone will boot in 1.0.2 however i want to be on at least version 1.1.1 - as anything decent for iPhone you will need that firmware at least or the most up to date... so is it now ok for me to upgrade to 1.1.1 and then possbily to 1.1.2 as i know that in order to get to a jail broken 1.1.2 a method needs you to have installed OkToPrep on 1.1.1 before hand... the main thing is the phone is working... surely? Steve |
|
|
|
0
|
|
|
#6 | |
|
Quote:
iPhone modding is not for the faint of heart iPhone 8GB - $399 Mac Book Pro - $2199 iPod 4th G - $299 No more fatal error or blue screen of Death - Priceless
|
||
|
|
0
|
|
|
#7 |
|
I went to 1.1.2 and wish I had stayed at 1.1.1 but now I can't go back with AT&T activated SIM.
|
|
|
|
0
|
|
|
#8 |
|
|
0
|
|
|
#9 |
|
You can use anysim 1.2.1u to unlock 1.1.2 if you have the old botloader (if your phone was originaly shipped with a 1.1.1 or less firmware you are lucky)
First you have to run Oktoprep while in 1.1.1 |
|
|
|
0
|
|
|
#10 |
|
Ok so my phoen now works, however it will not unlock through anySIM. it says firmware already patched but the phone wont accept he SIM card, so i was wondering if it is indeed possible to solve this.
specs: Version: 1.0.2 (1C28) Model: MA712 Modem Firmware: 04.02.13_G ---------------------------------------- So any help wud be welcome.. ;P Steve |
|
|
|
0
|
|
|
#11 | |
|
Quote:
So what you have to do now is update back to 1.1.1 but in a carefull way. You have to Virginize your iPhone's BaseBand then update. Once that is done you should have a fully working 1.1.1 |
||
|
|
0
|
|
|
#12 | |
|
Quote:
however i am willing to trust your help, but how do I verginize my phone because i understand this requires wi-fi which i have, its just my phone isnt too keen on connecting to it and hence i cant tell the software its ip address. I would of used iDemocracy for this... please advise of a better way. Steve |
||
|
|
0
|
|
|
#13 |
|
As I understood it I have to restore to 1.0.2 to even use anySim. I restored to 1.1.1 got error 1614 then restored to 1.0.2 and immediately got error (1) and my phone goes into DFU mode I was able only to restore back to 1.1.2 to get it working. I have a June 29 iPhone.
|
|
|
|
0
|
|
|
#14 | |
|
Quote:
|
||
|
|
0
|
|
|
#15 | |
|
Quote:
http://iphone.unlock.no/ However you have to read to see which guide is most useful to you. Trace back your steps and judge which guide is the one you need. This is a *VERY* trusted source. |
||
|
|
0
|
![]() |
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| thread | Thread Starter | Forum | Replies | Last Post |
| 2g upgrade to iPhone 4 - need help with porting numbers & plans | ServiceTag | iPhone | 5 | Jan 1, 2011 03:00 PM |
| Iphone bricked badly, need help!! | bastian476 | iPhone Tips, Help and Troubleshooting | 6 | Sep 13, 2010 08:19 AM |
| :(:( iPhone Wont Load!! - I BADLY NEED HELP!!! | dizzy4371 | iPhone Tips, Help and Troubleshooting | 2 | May 24, 2010 04:49 PM |
| Iphone wont load firmware help! | Lexani18zz | Jailbreaks and iOS Hacks | 0 | May 3, 2010 07:49 PM |
| iPhone Wont Load After New Update... please help asap!! | iZorathDude | iPhone Tips, Help and Troubleshooting | 0 | Oct 18, 2009 04:29 PM |
All times are GMT -5. The time now is 03:31 PM.







iPhone 8GB - $399
Linear Mode

