PowerBook Keynote Projector Problem

Discussion in 'PowerPC Macs' started by rocketeer87, Jul 4, 2005.

  1. macrumors newbie

    About a month ago, I started having problems using my PowerBook with our digital projector. After about 20 minutes, the image on the screen almost completely disappears except for a small, vertical, jagged strip in which some of the slide can still be seen. Usually escaping the presentation and restarting it clears the problem for awhile. Oddly enough, the jagged strip will only appear on my laptop screen when in mirror mode; if I am using dual display mode to see my notes on the laptop, the jagged strip only appears on the projector's screen, not my laptop.

    I reinstalled Keynote 2.0, eliminated a monitor extension cable and replaced the projector and its cable to no avail. So far the problem has not occured with PowerPoint, but I don't use PowerPoint enought to be sure that would solve the problem.

    What else could be the cause? The monitor cable adapter, the monitor port on my PowerBook, the video card, Keynote, Tiger? It's very frustrating and not a little embarrassing in front of all those Wintel folks.

    Any help would be appreciated.

    Jeff Smith
    Fort Worth TX
  2. macrumors P6

    IJ Reilly

    Wow, that is weird. Have you tried hooking the PowerBook up to another monitor, or used the DVI connector if you've got one on the PowerBook? Does changing the monitor resolutions have an effect?
  3. macrumors newbie

    I hooked the PowerBook up to another external display and could not replicate the issue. I am going to buy a new DVI to VGA adapter tomorrow to see if the adapter could have gone faulty. The problem only seems to occur when a projector is attached to the PowerBook, but the strange, jagged image will also appear on the laptop screen when in mirror mode.
  4. macrumors P6

    IJ Reilly

    If I understand you correctly, the problem goes away when you're not using the VGA->DVI adaptor. If that's the case, I think you're on the right troubleshooting track. Let us know how it works out. I'm certainly curious.
  5. macrumors newbie

    I noticed some crud in the DVI port on my PowerBook today and blew it out with pressurized air. Three of the slots had some junk in them, so maybe that has something to do with the issue. I am going to see if that clears the problem now.
  6. macrumors newbie

    Sadly, cleaning out the DVI port with compressed air did not prove helpful as the problem recurred within about 15 minutes. Replacing the DVI/VGA adapter also did not help. So finally I started PowerPoint and it worked perfectly during a 45 minute test. Looks like the problem has to be Keynote itself. Although I have already reinstalled Keynote once, I am doing so again now.
  7. macrumors 6502

    What about replacing the cable itself?
  8. macrumors newbie

    I replaced the cable when I replaced the projector. I have now replaced everything outside of the computer -- cables and projector. If PowerPoint works and Keynote doesn't, I think it has to be a Keynote problem.
  9. macrumors P6

    IJ Reilly

    And a bizarre one at that, especially given that it happens only some of the time.
  10. macrumors newbie


    After exhausting nearly every fix I could think of, today I tried matching the resolution of the PowerBook display to that of the projector (800 x 600). So far, this is working. I have never had to do this before, but for some reason, it seems to have become necessary. I don't know if this is a result of the Keynote software update from late May or something else, but hopefully the fix will stick.

    UPDATE: This fix did not stick, so I eventually created a new user account and the problem did not reappear in the new account. The real fix however, occured in that I did not bother to reinstall a Dashboard widget that turned out to be the real culprit. MonkeyLab's TV tracker widget has a feature to automatically update the listings and apparently, when it tried to access the network and failed, it would foul up my presentation.

Share This Page