1. Welcome to the new MacRumors forums. See our announcement and read our FAQ

Upgrading iMac RAM Questions

Discussion in 'Macintosh Computers' started by Rhobes, Nov 17, 2005.

  1. macrumors 6502

    Rhobes

    #1
    I have a 256 MB standard DIMM and personally added a 512 SODIMM for 768 RAM. I just bought another 512 to replace the 256 modual to max out my memory at 1024.

    I heard replacing the 256 isn't easy & I should bring it into a shop for this. Is that true? I would need to find out how it's done if it's not that difficult.

    When removing the 256 and replacing with the 512 will I loose anything? Does software need to be reloaded and everything backed up? :confused:

    Thanks...
     
  2. macrumors 601

    #2
    It's not hard as long as you are careful. You'll also need thermal paste and a razor, credit card, or business card to remove the old thermal paste. There are disassembly guides on www.xlr8yourmac.com to help.

    You shouldn't need to touch the software when doing this. It is equivalent of adding the 512MB stick to the lower slot.
     
  3. macrumors 68020

    Heb1228

    #3
    Backing up is always a good precaution whenever you do work like this on your machine. If you're comfortable taking it apart, then it shouldn't be too big of a deal. Make sure you keep up with all the screws.

    Try this for instructions:
    http://docs.info.apple.com/article.html?artnum=75317
     
  4. macrumors 6502

    Rhobes

    #4
    Thanks for the replies. The Apple link is only good for replacing the easy bottom 512. I did find an article on the other link which explains it all and will try it.;)

    P.S. Where can I get the thermal paste, Radio Shack? any certain brand?
     
  5. macrumors 601

    #5
    Radio Shack sells a tube for around $1.99 if I recall. I used the Radio Shack brand on mine.. No problems at all.

    You might also want some compressed air. It's amazing how much dust gets in there and never leaves.
     

Share This Page