Sidebar Sidebar
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

3D-Printed iPhone 15 Models Used to Test iPhone 14 Case Compatibility

MacRumors

MacRumors

macrumors bot
Original poster
Apr 12, 2001
68,698
39,604


Japanese website Mac Otakara has shared a video in which supposedly size-accurate 3D-printed iPhone 15 dummies are compared to iPhone 14 cases, and it looks as if the tweaks that Apple has made to the dimensions of its next flagship iPhone series mean that in most cases they won't fit cases made for the previous generation.

iphone-15-3d-printed-macotakara.jpg

In the video, 3D-printed versions of the iPhone 15, iPhone 15 Plus, iPhone 15 Pro, and iPhone 15 Pro Max are shown that are allegedly based on accurate schematics. The Pro dummies feature curved edges, smaller bezels, and a slightly larger rear camera housing, in line with design rumors. There's also a USB-C port replacing the Lightning port on all four models.

Assuming the 3D printouts sourced from Alibaba are accurate, Mac Otakara's tests seem to confirm that small changes in the chassis dimensions of the new handsets make them incompatible with iPhone 14 cases, with the exception of the iPhone 15 Plus, which did fit iPhone 14 Plus cases.

iphone-15-3d-printed-dummies.jpg

Apple is bringing the Dynamic Island to all four iPhone 15 models this year, after having made the feature exclusive to the iPhone 14 Pro models last year. That means Apple will be doing away with the notch that it has used since the iPhone X for the flagship iPhone lineup.

Rumors suggest the iPhone 15 Pro models will feature thinner, more curved bezels than the iPhone 14 Pro models. These deeper curves will be limited to the iPhone 15 Pro models, and the iPhone 15 models will look like the iPhone 14 models with flatter edges, an aluminum frame, and a glass front and back.


The iPhone 15 Pro lineup is also expected to feature more curved front glass that better disappears into the frame, and Apple is expected to use titanium instead of stainless steel for the chassis, with Apple adopting solid-state volume and power buttons.

For all the details on what we can expect from the iPhone 15 series, be sure to check out our dedicated roundups using the links below this article.

Article Link: 3D-Printed iPhone 15 Models Used to Test iPhone 14 Case Compatibility
 
Article Link
https://www.macrumors.com/2023/03/13/iphone-15-models-iphone-14-case-size-compared/
The regular 15 looks bigger than the 15 pro. Is that because the regular 15 will be 6.2" as rumoured, and the 15 pro remains 6.1"?

If so, why would they choose 6.2" for the regular 15.

Edit: looking at it again, it looks even bigger than 6.2". What would be the rationale behind it. Let's make the 15 plus sell even worse than the 14 plus?
 
MercuryNL said:
The regular 15 looks bigger than the 15 pro. Is that because the regular 15 will be 6.2" as rumoured, and the 15 pro remains 6.1"?

If so, why would they choose 6.2" for the regular 15?
Click to expand...
The CAD files have shown that the 15 would be larger than the 15 pro. As of today, there is 2 contradicting rumors about the 15:
 
  • Like
Reactions: surfzen21
I wish they would stop with doing just enough on the iPhone to make the cases incompatible with last years phone. You wanna something the same- hmm, try price.
 
du57in said:
The 15 Pro almost looks like it slots between the Mini and standard 14. If it's titanium, it should be much lighter as well. Interesting.
Click to expand...
it is perspective correction. It is barrelly smaller than the 15.
 
  • Like
Reactions: du57in
You must log in or register to reply here.
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.
Top Bottom
Back