I have the following equipment:
Airport Express (non N) WiFi access point: AE1
Airport Express (non N) WiFi access point: AE2
Mac Pro: MP
MacBook Pro: MBP
SonicWALL TZ 190 WiFi Firewall: TZ
HP Color LaserJet 4600 DN with WiFi 801.11: HP
Cable Modem: CM
I would like to configure this to works as follows:
MP - contains iTunes library. MP will be connected to TZ via hardwire ethernet (can be assigned a static or DHCP address). I want to drive airtunes to either AE1 (Bedroom Speakers) or AE2 (B&O BeoSystem3) from MP (AE1, AE2 are not connected to hardwire TZ only WiFi from TZ). I want the MP to connect to the Internet through the TZ to the CM. I want the MP to print to the HP via wired connection to TZ then over WiFi to HP. MP has built-in WiFi.
MBP - want to connect to TZ190 via WiFi for Internet access, play iTunes from MP via iTunes share and print to HP CLJ via TZ190 WiFi to HP. DHCP address assigned from TZ.
TZ - Hardwire connected to CM for Internet, Backup VZAccess EVDO to Internet, Supports WiFi and hardwire connected to MP.
HP - WiFi 802.11 connection to TZ (can support static or DHCP address)
AE1 - WiFi connected to TZ, Miniphono to Speakers (Bedroom)
AE2 - WiFi connected to TZ, Miniphono to BeoSystem3
Not sure it this is possible and how to configure the AE1, AE2 to be configured (static address? DHCP from TZ?
Help is greatly appreciate.
TIA
Al
Airport Express (non N) WiFi access point: AE1
Airport Express (non N) WiFi access point: AE2
Mac Pro: MP
MacBook Pro: MBP
SonicWALL TZ 190 WiFi Firewall: TZ
HP Color LaserJet 4600 DN with WiFi 801.11: HP
Cable Modem: CM
I would like to configure this to works as follows:
MP - contains iTunes library. MP will be connected to TZ via hardwire ethernet (can be assigned a static or DHCP address). I want to drive airtunes to either AE1 (Bedroom Speakers) or AE2 (B&O BeoSystem3) from MP (AE1, AE2 are not connected to hardwire TZ only WiFi from TZ). I want the MP to connect to the Internet through the TZ to the CM. I want the MP to print to the HP via wired connection to TZ then over WiFi to HP. MP has built-in WiFi.
MBP - want to connect to TZ190 via WiFi for Internet access, play iTunes from MP via iTunes share and print to HP CLJ via TZ190 WiFi to HP. DHCP address assigned from TZ.
TZ - Hardwire connected to CM for Internet, Backup VZAccess EVDO to Internet, Supports WiFi and hardwire connected to MP.
HP - WiFi 802.11 connection to TZ (can support static or DHCP address)
AE1 - WiFi connected to TZ, Miniphono to Speakers (Bedroom)
AE2 - WiFi connected to TZ, Miniphono to BeoSystem3
Not sure it this is possible and how to configure the AE1, AE2 to be configured (static address? DHCP from TZ?
Help is greatly appreciate.
TIA
Al