Can an IP7 case be modified to fit the IP6S?

[HickDead]

Had anyone done this? Besides the headphone jack, the only difference is the camera cutout. Can a iPhone 7 case be modified (ie camera cutout trimmed) to fit an iPhone 6S?

I'm specifically talking about the Spigen Flip Armor case.

http://www.spigen.com/products/iphone-7-case-flip-armor?variant=25542300417

I need to find a way to get this to fit on a 6S. Engineers, please advice.

 

[rijc99]

How good are you with a Dremel? You'll need to shave the upper portion of the hole. Keep in mind the cutout is gonna look really odd though.

 

[Presonance]

Already been done. http://imgur.com/a/4Xmjt

 

[RWil85]

Already been done. http://imgur.com/a/4Xmjt

Almost spit my coffee out once that loaded

 

[HickDead]

Almost spit my coffee out once that loaded

Same here. Almost had hot coffee coming out of my nose. Still laughing

 

[Cyroceon]

Almost spit my coffee out once that loaded

Same here. Almost had hot coffee coming out of my nose. Still laughing

That's the opposite situation. That's fitting a 6/6s case to a 7. The original question was fitting a 7 case to a 6/6s, which I was questioning the reasoning for anyway.

 

[rijc99]

That's the opposite situation. That's fitting a 6/6s case to a 7. The original question was fitting a 7 case to a 6/6s, which I was questioning the reasoning for anyway.

I don't think Spigen makes a Flip Armor case for the 6/6s. Hence the need to modify the 7 version.

 

[Cyroceon]

I don't think Spigen makes a Flip Armor case for the 6/6s. Hence the need to modify the 7 version.

Ah, did not know that. Good point.

 

[HickDead]

I don't think Spigen makes a Flip Armor case for the 6/6s. Hence the need to modify the 7 version.

Yes that is my point. I put the Spigen Slim Liquid Armor IP7 case on my gf's 6S and the top portion of the camera cutout slightly covered the lens - but it looks like it can be trimmed down to make it fit.

 

[rijc99]

Yes that is my point. I put the Spigen Slim Liquid Armor IP7 case on my gf's 6S and the top portion of the camera cutout slightly covered the lens - but it looks like it can be trimmed down to make it fit.

It can be modified to fit. Although, since the 7's cutout is not the same, you might want to test taking pictures in dark environments to make sure the flash isn't being reflected back. If it does reflect back you can probably fix it by increasing the cutout even more.