Received the Case Crown iPhone 6 Plus Glider case today, and was actually pleasantly surprised. It is a 2 piece slider case. It is actually made quite well and is quite sturdy and should prevent bending. In fact, it's the best case I have had so far for a hard shell that does not bend near the volume rockers. The case is slightly bigger than the Spigen Thin fit, but not by much. It does have a little bigger lip, so you can lay it face down. The bottom slider comes off easy when you take it off, but stays solidly on the phone, so no worry about it becoming loose. A little harder sliding the rest of the phone out of the case, but if you got your fingers a little moist so it can stick to phone you can remove it. A leather glove or those rubber gloves will work better and provides much better grip on the phone when pulling it out. You don't have to worry about bending the phone as you remove the case. The buttons work well and have a solid click when using. Not bad for a $12 case. The one I have is the black, and has a matte finish, so the grip is quite good.
http://www.amazon.com/gp/product/B00NG0MOK0/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
The pics are the Case Crown next to the Spigen thin fit.
http://www.amazon.com/gp/product/B00NG0MOK0/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
The pics are the Case Crown next to the Spigen thin fit.
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.