Copy bootcamp partition from MBP to Mac Pro?

Sharky II

macrumors 6502a
Original poster
Jan 6, 2004
615
29
United Kingdom
Hi

I have a MBP 2010 with a small Bootcamp partition with Windows 7 32-bit on it.

Can i make a partition on my Mac Pro (2008, 8 x 2.8ghz), and clone the windows partition to it, and run it happily?

I need to do some Windows-only BOINC number crunching that would take advantage of the extra cores.

Thanks!
 

zephonic

macrumors 65816
Feb 7, 2011
1,200
561
greater L.A. area
I'm not sure. I do know that you can't just make a partition for bootcamp; the bootcamp assistant has to do that or else it won't recognize it.

I partitioned drive 4 in my MacPro for legacy stuff and bootcamp, but I can't assign the partition in bootcamp assistant: it wants to do the partitioning itself.
 

ashman70

macrumors 6502a
Dec 20, 2010
950
1
I would say it most likely would not work, first of all the hardware between the two systems is different, so different boot camp drivers, Windows would probably blue screen upon boot up on your MP if you cloned the installation from your MBP.
 

MacsRgr8

macrumors 604
Sep 8, 2002
7,858
1,182
The Netherlands
Usually the Windows partition will fail to "use" the correct drivers on a different Mac.

The Windows OS will probably boot but the drivers will probably fail to load.

Un-installing and re-installing the Apple Boot Camp software might help, but more often than not you'll have to reassign the hardware in the Device Manager.

I have seen this issue with trying to use a pre-installed MacBook Windows (XP and 7) installation on different MacBooks.

It was quicker to re-install the whole Windows OS...
 

Demigod Mac

macrumors 6502a
Apr 25, 2008
795
246
Possible, but Windows Activation will scream bloody murder since it's being moved to different hardware.
 

xgman

macrumors 603
Aug 6, 2007
5,085
849
If you can boot to the windows dvd, you may be able to run a sort of repair install on top of it to get the drivers in line and then run the bootcamp dvd to finish it up.
 

cutterman

macrumors regular
Apr 27, 2010
241
0
Uninstall the graphics card driver and any other hardware listed (through Windows control panel). Then clone the partition as above. You might want to save a clone of the original before removing the drivers.

If you are lucky enough to boot up, reinstall the Apple drivers.
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.