Got a tip for us?
Let us know
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
Does the iBook G4 1.42 Ghz use a WIDE display connector or a NARROW?
- Thread starter TommyLee
- Start date
- Sort by reaction score
You need a mini VGA to (regular sized) VGA connector.
Good machine. Max out the ram on it and put a bigger faster hard drive on it.
Good machine. Max out the ram on it and put a bigger faster hard drive on it.
Hiya,
This is from powerbookmedic.com
Note: There are two versions of the 14" LCD. One version has a wide connector on the back of the LCD which is about 1.5" long, the other has a narrow connector on the back of the LCD which is about 1" long. The only way to determine which LCD you need is to remove the 2 T6 screws on either side of the LCD, pop off the back case, remove the foil tape covering the connector, and measure the connector.
looks like you are going to do it the hard way.
Good luck.
This is from powerbookmedic.com
Note: There are two versions of the 14" LCD. One version has a wide connector on the back of the LCD which is about 1.5" long, the other has a narrow connector on the back of the LCD which is about 1" long. The only way to determine which LCD you need is to remove the 2 T6 screws on either side of the LCD, pop off the back case, remove the foil tape covering the connector, and measure the connector.
looks like you are going to do it the hard way.
Good luck.