Ok I have just swapped out form my 2010 mbp 15" to a 2011 mbp and I've been running a OWS 6gb pro SSD drive as a primary and a 2010 500gb as a data doubler drive. I had no problems till yesterday and my 500gb disappeared said it needed to be reinitialized.... I tried recovering data but says everything corrupt i think originally it said partition issue or such. So I sadly took the drive out and hopping to find a way to get my photos off its all my photos of my daughter for the last two to three years. So if anyone knows an idea let me know.
So I bought a 750gb seagate hybrid ssd/plater drive and put it in in place, formatted it and installed 16gb of owc ram. Took the computer turned it back on and ran fine all day. Went to put files on a few min ago to the secondary drive and boom. error - drive disappears - not even viewable in disk utility like the last one was. I can't transfer anything - its showing nothing at all. but everything else is running fine. Ram seems good. USed tech tool 6 everything passed ram wise - the main ssd had some errors show but it was like fail attempts and stuff that google said could be normal because of how it reads ssd.
I'm unsure of how to recover my HD data from first drive -
How to get my new drive to show
and I know SSD's require maintenance like my pro 6 - is there anything trim wise etc i need to do to keep this thing running and fix the issues I"m having.
I plan on buying a 2012 when they come out and carrying these drives over.
Thanks in advance guys!
So I bought a 750gb seagate hybrid ssd/plater drive and put it in in place, formatted it and installed 16gb of owc ram. Took the computer turned it back on and ran fine all day. Went to put files on a few min ago to the secondary drive and boom. error - drive disappears - not even viewable in disk utility like the last one was. I can't transfer anything - its showing nothing at all. but everything else is running fine. Ram seems good. USed tech tool 6 everything passed ram wise - the main ssd had some errors show but it was like fail attempts and stuff that google said could be normal because of how it reads ssd.
I'm unsure of how to recover my HD data from first drive -
How to get my new drive to show
and I know SSD's require maintenance like my pro 6 - is there anything trim wise etc i need to do to keep this thing running and fix the issues I"m having.
I plan on buying a 2012 when they come out and carrying these drives over.
Thanks in advance guys!