pknz
macrumors 68020
I am trying to print from Indesign 4.0.1, when i changes from Indesign to the print manager it tries to "Opening printer connection" the pops up with an error:
"Printing is completed. To eject banner paper, press Resume button on the printer.
<Delete Job> <Stop all Jobs> <Stop Job>"
I am trying to print on a HP Photosmart 2710 all-in-one on A4 sized paper.
Indesign Document set up as follows:
Number of Pages: 1
Page size: A4
Width :210mm
Height: 297mm
Orientation: Portrait
Indesign Print Summary:
Print Preset: [Default]
Printer: HOME
PPD: N/A
PPD File: N/A
General
Copies: 1
Collate: N/A
Reverse Order: Off
Pages: All
Sequence: All Pages
Spreads: Off
Print Master Pages: Off
Print Non-printing Objects: Off
Print Blank Pages: Off
Print Visible Guides and Baseline Grids: Off
Setup
Paper Size: A4
Paper Width: 209.899 mm
Paper Height: 297.032 mm
Page Orientation: Portrait
Paper Offset: N/A
Paper Gap: N/A
Transverse: N/A
Scaling: 100%
Constrain Proportions: On
Page Position: Upper Left
Thumbnails: Off
Tiling: Off
Marks and Bleed
Crop Marks: Off
Bleed Marks: Off
Registration Marks: Off
Color Bars: Off
Page Information: Off
Printer Mark Type: Default
Crop Mark Weight: 0.25 pt
Mark Offset from Page: 2.117 mm
Use Document Bleed Settings: On
Bleed Top: 0 mm
Bleed Bottom: 0 mm
Bleed Left: 0 mm
Bleed Right: 0 mm
Include Slug Area: Off
Output
Color: Composite RGB
Text As Black: Off
Trapping: N/A
Flip: N/A
Negative: N/A
Screening: N/A
Simulate Overprint: Off
Graphics
Send Data: All
Download: N/A
Download PPD Fonts: N/A
PostScript®: N/A
Data Format: N/A
Color Management
Document Profile: sRGB IEC61966-2.1
Color Handling: Let InDesign Determine Colors
Printer Profile: Document RGB - sRGB IEC61966-2.1
Preserve RGB Numbers: Off
Proof Profile: N/A
Simulate Paper Color: N/A
Advanced
OPI Image Replacement: N/A
EPS: N/A
PDF: N/A
Bitmap Images: N/A
Transparency Flattener Preset: N/A
Ignore Spread Overrides: N/A
Any ideas?
Thanks
"Printing is completed. To eject banner paper, press Resume button on the printer.
<Delete Job> <Stop all Jobs> <Stop Job>"
I am trying to print on a HP Photosmart 2710 all-in-one on A4 sized paper.
Indesign Document set up as follows:
Number of Pages: 1
Page size: A4
Width :210mm
Height: 297mm
Orientation: Portrait
Indesign Print Summary:
Print Preset: [Default]
Printer: HOME
PPD: N/A
PPD File: N/A
General
Copies: 1
Collate: N/A
Reverse Order: Off
Pages: All
Sequence: All Pages
Spreads: Off
Print Master Pages: Off
Print Non-printing Objects: Off
Print Blank Pages: Off
Print Visible Guides and Baseline Grids: Off
Setup
Paper Size: A4
Paper Width: 209.899 mm
Paper Height: 297.032 mm
Page Orientation: Portrait
Paper Offset: N/A
Paper Gap: N/A
Transverse: N/A
Scaling: 100%
Constrain Proportions: On
Page Position: Upper Left
Thumbnails: Off
Tiling: Off
Marks and Bleed
Crop Marks: Off
Bleed Marks: Off
Registration Marks: Off
Color Bars: Off
Page Information: Off
Printer Mark Type: Default
Crop Mark Weight: 0.25 pt
Mark Offset from Page: 2.117 mm
Use Document Bleed Settings: On
Bleed Top: 0 mm
Bleed Bottom: 0 mm
Bleed Left: 0 mm
Bleed Right: 0 mm
Include Slug Area: Off
Output
Color: Composite RGB
Text As Black: Off
Trapping: N/A
Flip: N/A
Negative: N/A
Screening: N/A
Simulate Overprint: Off
Graphics
Send Data: All
Download: N/A
Download PPD Fonts: N/A
PostScript®: N/A
Data Format: N/A
Color Management
Document Profile: sRGB IEC61966-2.1
Color Handling: Let InDesign Determine Colors
Printer Profile: Document RGB - sRGB IEC61966-2.1
Preserve RGB Numbers: Off
Proof Profile: N/A
Simulate Paper Color: N/A
Advanced
OPI Image Replacement: N/A
EPS: N/A
PDF: N/A
Bitmap Images: N/A
Transparency Flattener Preset: N/A
Ignore Spread Overrides: N/A
Any ideas?
Thanks