Internet slow loading due to Airport Extreme!

[macintoshxiii]

Hi guys,

lately i had an issue which i cannot resolve here. My APE seems to be the main cause to slow my internet in loading pages up. My speed with the check from ISP, it is great. However, I realize that my ping time is kinda high? Can anyone please advise on that? What should I do to bring my internet back to smooth loading up? Thank ya so so much! Below is an example of my ping test.

PING e3191.c.akamaiedge.net (118.215.85.15): 56 data bytes
64 bytes from 118.215.85.15: icmp_seq=0 ttl=57 time=1983.437 ms
64 bytes from 118.215.85.15: icmp_seq=2 ttl=57 time=1876.836 ms
64 bytes from 118.215.85.15: icmp_seq=3 ttl=57 time=1952.398 ms
64 bytes from 118.215.85.15: icmp_seq=4 ttl=57 time=1727.896 ms
64 bytes from 118.215.85.15: icmp_seq=5 ttl=57 time=1741.215 ms
64 bytes from 118.215.85.15: icmp_seq=6 ttl=57 time=1651.209 ms
64 bytes from 118.215.85.15: icmp_seq=7 ttl=57 time=1632.164 ms
64 bytes from 118.215.85.15: icmp_seq=8 ttl=57 time=1855.430 ms
64 bytes from 118.215.85.15: icmp_seq=9 ttl=57 time=2045.755 ms
^C
--- e3191.c.akamaiedge.net ping statistics ---
12 packets transmitted, 9 packets received, 25% packet loss
round-trip min/avg/max/stddev = 1632.164/1829.593/2045.755/140.367 ms

 

[Kingcodez]

Have you done a traceroute?

 

[macintoshxiii]

Yes I did and the result as showed

Traceroute has started ...

traceroute: Warning: www.yahoo.com has multiple addresses; using 98.137.149.56
traceroute to any-fp.wa1.b.yahoo.com (98.137.149.56), 64 hops max, 40 byte packets
1 10.0.1.1 (10.0.1.1) 1.488 ms 0.958 ms 0.875 ms
2 cm1.omega72.maxonline.com.sg (218.186.72.1) 1883.818 ms 1740.498 ms 1946.272 ms
3 172.20.52.97 (172.20.52.97) 1982.563 ms 1944.092 ms 2010.020 ms
4 172.26.52.1 (172.26.52.1) 2253.411 ms 1841.904 ms 1467.068 ms
5 172.20.7.22 (172.20.7.22) 1915.494 ms 1945.255 ms 2151.493 ms

What can I do?

 

[sushma]

ollow the following steps to increase the speed

1. Go to Start-> Run-> and type gpedit.msc
2. Expand the Administrative Templates branch
3. Expand the Network tab
4. Highlight QoS Packet Scheduler
5. Click on Limit Reservable Bandwidth and check the enabled box
6. Then Change the Bandwidth limit % to 0 %

After that check the speed here http://www.ip-details.com/