Sidebar Sidebar
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

Logic Board replacement question

J

jon08

macrumors 68000
Original poster
Nov 14, 2008
1,893
109
I have a late-2011 MBP with a faulty GPU and I’m considering getting a used logic board to replace the current logic board with the faulty GPU. That way I’d hopefully sell my MBP off easier...

Does the replacement logic board *have* to be for the exact same model (i.e. late-2011 with 512MB GPU), or could it also be, say, early-2011 logic board with a 1GB GPU?
 
jon08 said:
Does the replacement logic board *have* to be for the exact same model (i.e. late-2011 with 512MB GPU), or could it also be, say, early-2011 logic board with a 1GB GPU?
Click to expand...
Generally yes, because from generation to generation there is enough changes to the logic board that you will not fit it into the case, and/or have everything lined up.
 
  • Like
Reactions: Newtons Apple
maflynn said:
Generally yes, because from generation to generation there is enough changes to the logic board that you will not fit it into the case, and/or have everything lined up.
Click to expand...
I’m currently considering a rather inexpensive 2nd hand logic board that was sent to the seller as a replacement for early-2011 MBP with 1GB GPU.

Would this still work flawlessly on my late-2011 MBP that originally comes with a 512 MB GPU?
 
Just checking, I’m been looking for a motherboard ummm logic board for a iMac g4 this year.
[doublepost=1532388130][/doublepost]
Audit13 said:
Yes, I should have said motherboard instead of logic board.
Click to expand...
If that is today’s term no apology needed!
 
Macbookprodude said:
Here is another question.. what about taking the 2011 logic board out and replacing it with a non-retina 2012 ?
Click to expand...
Logicboards change from year to year, their keyboard ribbons might be slimmer and not connect.
Maybe that might work, I guess research until someone here says they did.
 
Expobill said:
Logicboards change from year to year, their keyboard ribbons might be slimmer and not connect.
Maybe that might work, I guess research until someone here says they did.
Click to expand...

I guess what I am trying to do as a last resort before i INSTALL linux on my computer is to see if a 2012 will fit, so i can get Mojave.
 
I have an early 2011 Macbook Pro which died on me six months ago. I was planning on finally replacing it with the new Macbooks but since they turned out not so great I decided to try and resurrect mine.

I followed this guide on basically baking the logic board in the oven for 7 minutes and it worked!

So maybe give it a shot since you're planning on getting a new one anyway? Could save you some money.
 
Hydro150 said:
I have an early 2011 Macbook Pro which died on me six months ago. I was planning on finally replacing it with the new Macbooks but since they turned out not so great I decided to try and resurrect mine.

I followed this guide on basically baking the logic board in the oven for 7 minutes and it worked!

So maybe give it a shot since you're planning on getting a new one anyway? Could save you some money.
Click to expand...
Reflow can be hit or miss, depending on the condition of the board and solder.

The reflow could work for a short or long period of time. Either way, I recommend saving for a replacement.
 
Audit13 said:
Technically, I think a motherboard is a logic board.

I've heard people use the term interchangeably.
Click to expand...
As far as I know the term 'logic board' is used specifically for Mac, while 'motherboard' is used in general (including Macs I guess).
[doublepost=1532419042][/doublepost]So, just to reconfirm:

- if I put an early-2011 1GB GPU logic board to replace my late-2011 512MB GPU logic board it won't be any problem whatsoever?
- but then it will say my MBP is an early-2011 MBP and it will have a different serial number under "About This Mac"?
- anything else I should be aware of?
 
jon08 said:
As far as I know the term 'logic board' is used specifically for Mac, while 'motherboard' is used in general (including Macs I guess).
[doublepost=1532419042][/doublepost]So, just to reconfirm:

- if I put an early-2011 1GB GPU logic board to replace my late-2011 512MB GPU logic board it won't be any problem whatsoever?
- but then it will say my MBP is an early-2011 MBP and it will have a different serial number under "About This Mac"?
- anything else I should be aware of?
Click to expand...

From what I've read on this thread I don't believe anyone on here is confirming any of the above. Seems more like they are saying quite the opposite.
 
MrGimper said:
From what I've read on this thread I don't believe anyone on here is confirming any of the above. Seems more like they are saying quite the opposite.
Click to expand...
From what I gather all 2011 15” models use the same faulty GPUs and logic boards, don’t they?
 
jon08 said:
From what I gather all 2011 15” models use the same faulty GPUs and logic boards, don’t they?
Click to expand...

I don't know, I'll bow to other more knowledgable people. My point is that you seem to think that posts on this thread are confirming your listed points about other mother/logic boards working in your machine, when the posts I've read on here are saying there are likely enough subtle differences for that not to be the case. Therefore no-one is confirming what you listed
 
You must log in or register to reply here.
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.
Top Bottom
Back