Hey everyone,
First time posting here, although I'm always looking through these forums for answers so thanks for all your knowledge. My problem lies in the performance of Maya 2010 on my iMac. I have an old 2005 HP notebook that runs it better than my 2010 iMac. First time I loaded it up I started to model and noticed immediately it was slow and had to "think" before doing anything, rotating around an object, selecting vertices...anything. Restarted, reinstalled, nothing helped. So I came to your forums and found some people with the same issue. These people were having success with the issue by creating another user on the mac and only using it for Maya. I tried that with no success, still pausing with every move. I'm stumped so I would love some help if anyone may know something.
Software: Autodesk® Maya® 2010 2009 07 28 03 41
© 2009 Autodesk, Inc.
Hardware:
Model Name: iMac
Model Identifier: iMac11,3
Processor Name: Intel Core i3
Processor Speed: 3.2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per core): 256 KB
L3 Cache: 4 MB
Memory: 4 GB
Processor Interconnect Speed: 5.86 GT/s
Boot ROM Version: IM112.0057.B00
SMC Version (system): 1.59f2
Chipset Model: ATI Radeon HD 5670
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x68c0
Revision ID: 0x0000
ROM Revision: 113-B9850K-133
EFI Driver Version: 01.00.416
System Version: Mac OS X 10.6.8 (10K549)
Kernel Version: Darwin 10.8.0
Boot Volume: Macintosh HD
Boot Mode: Normal
First time posting here, although I'm always looking through these forums for answers so thanks for all your knowledge. My problem lies in the performance of Maya 2010 on my iMac. I have an old 2005 HP notebook that runs it better than my 2010 iMac. First time I loaded it up I started to model and noticed immediately it was slow and had to "think" before doing anything, rotating around an object, selecting vertices...anything. Restarted, reinstalled, nothing helped. So I came to your forums and found some people with the same issue. These people were having success with the issue by creating another user on the mac and only using it for Maya. I tried that with no success, still pausing with every move. I'm stumped so I would love some help if anyone may know something.
Software: Autodesk® Maya® 2010 2009 07 28 03 41
© 2009 Autodesk, Inc.
Hardware:
Model Name: iMac
Model Identifier: iMac11,3
Processor Name: Intel Core i3
Processor Speed: 3.2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per core): 256 KB
L3 Cache: 4 MB
Memory: 4 GB
Processor Interconnect Speed: 5.86 GT/s
Boot ROM Version: IM112.0057.B00
SMC Version (system): 1.59f2
Chipset Model: ATI Radeon HD 5670
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x68c0
Revision ID: 0x0000
ROM Revision: 113-B9850K-133
EFI Driver Version: 01.00.416
System Version: Mac OS X 10.6.8 (10K549)
Kernel Version: Darwin 10.8.0
Boot Volume: Macintosh HD
Boot Mode: Normal