Powerbook superdrive burn errors

[superbovine]

I found this thread:
https://forums.macrumors.com/threads/95447/

Its seems to suggest, I may have corrupted files, and a reinstall of os x would be need to correct the problem. There is any specific files I can reinstall? Any other ideas? The burns fail in Toaster and finder

Here is my error log:
Finder: Burn started, Wed Nov 3 20:39:31 2004
Finder: Burning to CD-R media with SAO strategy in MATSHITA DVD-R UJ-816 DXJ3 via ATAPI.
Finder: Requested CD burn speed was max, actual burn speed is 16x.
Finder: Burn underrun protection is supported, and enabled.
Finder: Write (10), block: -150, count: 32 -> 3/73/03 Medium Error, Power calibration area error
Finder: Burn failed, Wed Nov 3 20:39:41 2004
Finder: Burn sense: 3/73/03 Medium Error, Power calibration area error
Finder: Burn error: 0x80020022 The device failed to respond properly, unable to recover or retry.
Nov 3 20:39:42 supercow kernel: disk1: alignment error.
Nov 3 20:40:39 supercow kernel: SAM Multimedia: READ or WRITE failed, ASC = 0x10, ASCQ = 0x00
Nov 3 20:40:39 supercow last message repeated 3 times
Nov 3 20:40:39 supercow kernel: disk1: I/O error.
Nov 3 20:40:39 supercow kernel: disk1: alignment error.
Nov 3 20:40:39 supercow last message repeated 2 times

 

[Mechcozmo]

Try repairing permissions. See if there are any updates to Toast (Roxio is what you mean by Toaster right? and if not, then whatever program you mean). Also, try setting your burn speed lower, to maybe 8x and see if it works.

It could be cheap media.... but I dunno....

 

[superbovine]

Try repairing permissions. See if there are any updates to Toast (Roxio is what you mean by Toaster right? and if not, then whatever program you mean). Also, try setting your burn speed lower, to maybe 8x and see if it works.

It could be cheap media.... but I dunno....

Its not any of those things. I repair my permission automatically every month, and the problem happens in finder too as well as roxio. it an issue is with the driver interaction with the drive, and not cheap media. I have burned the same media with the same superdisc before.

 

[Mechcozmo]

I guess you could start off of your most recent OS X disc and try to Verify or Repair the start up disc. Might be a rather long shot though.

Does it read media perfectly? What about coping files from a CD or DVD to the hard drive?

 

[superbovine]

its a software problem, any other ideas? i can't verify the disk because, i do not havea current os x only the image.