hello,
I have a problem after using CCC to clone my old drive into a 500g WD.
When I fist setup the new drive (inside an exteranl case) I did the main partition around 400g for OSX and two smaller (20 and 15g) for the windows and linux I had in my old drive. Initially I formatted them with EXT2 coz I thought Ill will change it later.
The drive was partitioned with GPT (not MBR). After the cloning of OSX I blessed it and I boot it.
New I have something like a mess... of my old and new setup...
zmkl:~ varoudis$ sudo fdisk /dev/rdisk0
Password:
Disk: /dev/rdisk0 geometry: 60801/255/63 [976773168 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
------------------------------------------------------------------------
1: EE 1023 254 63 - 1023 254 63 [ 1 - 409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [ 409640 - 912276784] HFS+
3: 83 1023 254 63 - 1023 254 63 [ 912948568 - 25165824] Linux files*
4: AB 1023 254 63 - 1023 254 63 [ 938114392 - 262144] Darwin Boot
zmkl:~ varoudis$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *465.8 Gi disk0
1: EFI 200.0 Mi disk0s1
2: Apple_HFS >zmkl 435.0 Gi disk0s2
3: FFFFFFFF-FFFF-FFFF-FFFF-FFFFFFFF 12.0 Gi disk0s3
4: Apple_Boot Boot OSX 128.0 Mi disk0s4
5: FFFFFFFF-FFFF-FFFF-FFFF-FFFFFFFF 18.2 Gi disk0s5
6: Apple_Boot Boot OSX 128.0 Mi disk0s6
zmkl:~ varoudis$
But I only used Disk Util to make 3 partitions!!! And new I cant delete them!!!
That do I need to do? (re-init the MRB with fdisk? something else?)
Thnx
tasos
PS: command line tools and hacks not a problem!
I have a problem after using CCC to clone my old drive into a 500g WD.
When I fist setup the new drive (inside an exteranl case) I did the main partition around 400g for OSX and two smaller (20 and 15g) for the windows and linux I had in my old drive. Initially I formatted them with EXT2 coz I thought Ill will change it later.
The drive was partitioned with GPT (not MBR). After the cloning of OSX I blessed it and I boot it.
New I have something like a mess... of my old and new setup...
zmkl:~ varoudis$ sudo fdisk /dev/rdisk0
Password:
Disk: /dev/rdisk0 geometry: 60801/255/63 [976773168 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
------------------------------------------------------------------------
1: EE 1023 254 63 - 1023 254 63 [ 1 - 409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [ 409640 - 912276784] HFS+
3: 83 1023 254 63 - 1023 254 63 [ 912948568 - 25165824] Linux files*
4: AB 1023 254 63 - 1023 254 63 [ 938114392 - 262144] Darwin Boot
zmkl:~ varoudis$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *465.8 Gi disk0
1: EFI 200.0 Mi disk0s1
2: Apple_HFS >zmkl 435.0 Gi disk0s2
3: FFFFFFFF-FFFF-FFFF-FFFF-FFFFFFFF 12.0 Gi disk0s3
4: Apple_Boot Boot OSX 128.0 Mi disk0s4
5: FFFFFFFF-FFFF-FFFF-FFFF-FFFFFFFF 18.2 Gi disk0s5
6: Apple_Boot Boot OSX 128.0 Mi disk0s6
zmkl:~ varoudis$
But I only used Disk Util to make 3 partitions!!! And new I cant delete them!!!
That do I need to do? (re-init the MRB with fdisk? something else?)
Thnx
tasos
PS: command line tools and hacks not a problem!